To adjust this setting take the following steps:
- Wake the Lock by pressing the Yale Button.
- Enter the 4-8 digit Master PIN code followed by the gear icon.
- Press the #4 button.
- From here you can press the #3 button to mute the Lock. If you have already muted the Lock, on this step press the #1 button to unmute the Lock.
How do you silence a Yale safe?
You need to press and hold ‘ENTER’ whilst simultaneously pressing ‘2’ to change this setting.
How do I change the volume on my Yale Keyless door lock?
How Do I Change the Volume Settings on the Keyless Connected Smart Lock?
- Wake up the keypad by touching it using the palm of your hand.
- Enter your current master code and then press the hash button.
- Now press the hash button.
- Press the number 8 button, followed by the hash button.
Why is my Yale lock beeping?
What Does This Mean? If the lock makes an unusual beep when locking or unlocking and the face of the lock flashes odd numbers (1, 3, 5, 7, 9) in an X pattern, the lock is jammed. This means the deadbolt is not able to fully extend into the door strike, or the motor in the lock is malfunctioning.
On the inside of your lock, you may notice a black button under or next to the thumb turn.This button, when enabled, allows you to set your lock into privacy mode. This setting mimics a manual chain lock or hinge lock.
How do I open a Yale with a flat battery?
To do this: 1) Hold the battery on to the terminals, whilst keeping the 9V battery held on with your other hand 2) Touch the digital screen to ‘wake up’ the safe’s display 3) Enter your code in the normal manner and the safe will open. Once the safe is open please replace the batteries.
How loud is a Yale alarm?
The technical specification is 104 decibels (dBA). The internal siren on the Smart Hub is 100 dBA.
How do I reset my Yale keypad lock?
Remove the mounting plate to reveal the reset button, which is located on the left side of the cable connector. Hold down the reset button while you put in the batteries. Keep holding down on the reset button until the light turns red and the lock says Just a moment, erasing all settings. Release the reset button.
How do I reprogram my Yale keypad lock?
How do I set or change the primary code on my Keyless Connected Smart Door Lock?
- Wake up the keypad by touching it using the palm of your hand.
- Enter your current master code and then press the hash button.
- Then press the number 1, followed by the hash key.
- Enter a new master code, which must contain 6 numbers.
Why does my Yale alarm beep 5 times?
The unit will’ beep’ five times when arming the system to inform you that the battery power is too low. It is required to disable the siren tamper when swapping out batteries.
Does my Yale lock have Bluetooth?
Andersen Yale Assure lock comes with the Z-wave and Bluetooth module. Customers can add a Yale Network Module (zigbee or Apple Home kit) if desired, to seamlessly integrate into these types of smart home or alarm system.
What is Yale master code?
2. Enter the 8-digit default Master PIN code (12345678) followed by the key.
How do I unlock sandleford safe?
Locking (Safe unlocked): Close the door. Enter 3-6 digit code followed by the LOCK key. The display will read CLOSED and the safe will now be locked. Opening (Safe locked) : Input the previously-set 3-6 digit user code.
How do I open an old Yale safe?
How to Open a Yale Safe With a Combination
- Rotate the dial on the front of the safe twice, once clockwise to the right and once counterclockwise to the left, stopping the dial at 0.
- Rotate the dial in a clockwise direction, passing the first number of the combination four times.
How do I turn off my Yale smart alarm?
Yale Home App
You can stop the alarm by disarming it using the app, a keypad, or a key fob. How do I turn off warning ‘beeps’ from my smart hub? In the app go to Settings-Alarm Settings-System Settings-General Configuration. Turn off Hub Warning Sounds and press Save.
Can Yale alarms be hacked?
As reported in our recent investigation into how your smart home could be vulnerable to hackers, this Yale alarm was one of the most targeted smart devices by real cybercriminals. Although none of the attacks were successful in our test, the threat is very real.
Are Yale alarms good?
Overall, the Yale Sync alarm is a good system. It’s well priced, works reliably and essentially does what you want it to do.
How do I control my Yale phone lock?
Tap the + icon next to your home name to add a new lock. Tap the Yale lock when it appears as an available device. Using your iPhone® or iPad®, scan the 8-digit Accessory Set-Up Code located on the back of your iM1 Installation Manual (inside the Network Module box). You can also manually enter this code in the app.
How do I reset my Yale Z Wave lock?
If you want to factory default your Yale Z-Wave Lock, complete the following steps:
- Prepare the lock. Remove the battery cover from the lock.
- Press the reset button. Press the reset button, and keep it held down.
- Reapply power. With the reset button held down, reinsert the battery to reapply power.
- Reassemble the lock.
How do I setup my Yale Smart lock?
How to Set up a Device in the Yale Access App
- Download the Yale Access App. Download the free Yale Access App on your smartphone and create an account.
- Enable Bluetooth.
- Set up the Device in the Yale Access App.
- Scan the QR Code.
- Install Your Assure Lock.
- Power Your Assure Lock.
- Create Master Entry Code.
- Remove the Batteries.
Can you rekey a Yale Smart lock?
Smart locks with a backup physical key
If you purchase a 100% keyless systems such as Yale’s Assure Lock SL, you may want to keep your old door lock and keys around just incase you want to swap them back out. But certainly with this system, you’re not able to rekey the lock
because there isn’t one!
Contents