How Do I Turn Off The Sound On My Reolink Camera?

How to Turn on/off Audio in Live View via Reolink Client (New Client)

1. Launch Reolink Client and log into the camera, then go to Device Settings -> Camera ->Audio and Light page to enable/disable the audio.
2. Go to the Live view page.
3. Click on speaker to turn on Audio and drag the volume bar to adjust the volume.

How do I mute my Reolink camera?

Via Reolink Client:
Go to Device Settings >> Alarm, to turn on/off the PIR sensor by enabling/disable the Enable Alarm button as shown below.

How do I get my Reolink camera to stop beeping?

How to Enable/Disable Alarm Buzzer for POE NVR via Reolink App

1. Click the button on the top right corner to go to the settings page.
2. If you want to enable/disable alarm buzzer, please turn on/off the Buzzer(This setting will apply to app the cameras connected to the NVR).

How do I turn on the sound on my Reolink camera?

How to Turn on Audio on Camera Live View via Reolink app

1. Log into your camera and go to the Settings-Advanced page.
2. Enable Record Audio in the Advanced Page.
3. Click the speaker icon. to enable audio. 6 out of 14 found this helpful.

How do I change my Reolink notification sound?

Go to the Setting page on your phone.

1. Click Notification & Status Bar, and then select Manage Notifications.
2. Find and enter the Reolink notification setting page.
3. Enable Allow Notifications and Notification Sound and Vibration to make sure you can receive the push notification.

Where is the PIR button on the Reolink app?

Select Device Settings -> Alarm Settings -> PIR Motion Sensor -> Schedule to enter the Schedule page.

What is Reolink PIR?

Reolink Pre-sale Team. Applies to: Reolink battery-powered cameras. The PIR sensor (passive infrared sensor) detects changes in the amount of infrared radiation impinging upon it, which varies depending on the temperature and surface characteristics of the objects in front of the sensor.

Why does my Reolink camera beep?

The NVR’s keeping beeping may be caused by motion buzzer, video loss buzzer, exception buzzer, or the stuck system.Solution: The NVR may have experienced a camera’s video loss and thus trigger the beeping. To solve the video loss issue, you can contact the Reolink Support.

Why does my security camera keep beeping?

The beeping noise is telling you that the DVR has detected a problem somewhere in its setup.If the camera/s and the DVR are not using the same output standard, it will cause the DVR to make an alarm or beeping noise.

How do I get my NVR to stop beeping?

The first step is to right click on your mouse and log-in if prompted, and then select ‘Menu’.

1. Click ‘Menu’ to enter the main menu.
2. Next click ‘Configuration’.
3. Now click ‘Exceptions’.
4. Now select ‘All’ from the drop down next to ‘Exception Type’.
5. Uncheck the ‘Audible Warning’ tick box and click the ‘Apply’ button.

Does Reolink record sound?

One of the Best Outdoor PoE Bullet Camera with Audio – Reolink RLC-410. Reolink RLC-410 PoE 5MP HD outdoor security camera is embedded with built-in microphone, allowing users to record audio and video simultaneously.

Can you talk through Reolink cameras?

Two-way audio enables you to receive and transmit audio through the IP camera. Reolink cameras that support Two-way audio have a built-in speaker and microphone, you could talk through the camera via your Reolink app/client when you are far away from home.

How do I set up Reolink alerts?

Click Settings -> Notifications on your smartphone, and then click Reolink App to allow notifications.

1. For iOS devices:
2. For Android devices:
3. Launch Reolink App on your smartphone, and then click the button in the picture below to enter the Device Settings interface.
4. Click the Push icon to enable push notifications.

How do I make my push notifications louder?

1. Press the volume key on the side of your phone and move the slider to adjust the volume. 2. Click Settings -> Sounds on your smartphone, and then move the slider to adjust the volume.

How do I pause Reolink?

How to Stop Recording via Reolink PoE NVR

1. Go to Recording and then click Schedule.
2. keep Enable unchecked.

How do I turn off Reolink Argus?

Argus 2/ Argus Pro/GO: there is no direct power control button to power on/off the camera. But there is a PIR button on the phone app, you can enable/disable the PIR button to make the camera in working mode or standby mode.

How do I turn off Reolink?

There is no direct power control button to power on/off the Reolink Go. But there is a PIR button on the Reolink app, you can enable/disable the PIR button to make the camera in working mode or standby mode. Note: Standby mode is also called sleep mode, which is a low power mode for electronic devices.

What is PIR mode on camera?

“PIR” stands for passive infrared, and PIR Angle refers to the degree that the camera can sense movement. Cameras with a large PIR Angle can detect movement faster and have a better chance of capturing the subject in the center of the frame instead of the edges like some lower quality cameras do.

How do you turn off motion sensors?

Turn off the motion detector. You can either do this by removing the batteries or just turning the switch off. If you are using a PIR, disconnect the red, yellow, and black wires from the control panel. Using your screwdriver, unmount the device from the wall.

Does Reolink have motion sensor?

Reolink Go 4G/3G rechargeable battery powered security camera uses the advanced PIR motion sensor, offering you much more accurate alerts.

How do I restart NVR Reolink?

Reboot via Reolink Client

1. Launch your Reolink Client, go to the Device settings -> System -> Maintenance.
2. Click Reboot to reboot the NVR.