In the Wyze app, tap Home, then your Wyze Cam Outdoor. Tap More > Motion Tagging to toggle it on/off.
How do I turn on motion tagging in Wyze?
In order to enable Motion Tracking, much like enabling Motion Tagging, you would go to the Wyze app and select your Wyze Cam Pan, then, tap More. After that, you select Motion Tracking. When Motion Tracking is enabled, the button will be highlighted in green.
How do I change the sensitivity on my Wyze camera?
You can set the sensitivity of your Wyze Cam in Detection Settings. There, you’ll see a slider with a range of 1-100. This slider will adjust the percentage of changed pixels needed to generate an event video.
How do you stop Wyze from panning?
In the Wyze app, tap on your Wyze Cam Pan. Tap the Settings gear on the top right.
Additional Notes
- With Pan Scan turned on, the camera will continue to pan and pause at waypoints until you turn it off.
- When Pan Scan and Motion Tagging are both turned on, any motion detected will be framed by a green box.
How far can WYZE Cam detect motion?
The Wyze Cam Outdoor reportedly has limit of ~22 feet because it relies on IR sensor to save battery.
How do I turn off sound detection on WYZE?
Go to the Account tab and select the Notifications tab. From here you can pick a specific device from the list and pick what triggers a notification. Enabling and disabling some of the triggers might lower the number of Notifications.
How does the WYZE motion sensor work?
The Motion Sensor detects the motion of objects with a heat signature such as people and animals, though it may also sense other warm objects that move (for example, heat coming out of a vent) by sensing infrared light. The sensor detects objects at distances up to 26 feet and a horizontal detection angle of 120°.
How do I control my WYZE camera?
Wyze Cam Pan gives you added controls with Pan, Tilt, and Zoom.
Motor Controls
- In the Wyze app, tap on your Wyze Cam Pan.
- Tap the Settings icon on the top right, then Advanced Settings > Motor Controls.
- Drag the slider to set the speed. By default, the rotation speed is 5. 1 is the slowest speed, while 9 is the fastest.
How do I calibrate my Wyze camera?
To calibrate your Wyze Lock:
Open the Wyze app and tap Wyze Lock. icon to open Lock Settings. Scroll to the bottom of settings screen and tap Calibrate.
Does WYZE record all the time?
Using a microSD card with your Wyze Cam gives you the ability to record continuous footage and recorded events directly to your local microSD card.
Can a WYZE cam be hacked?
Yes, the Wyze Camera can be hacked and somebody can have access to the live video of your home or office. Keep in mind that the camera is not “unckeable” but there are ways to reduce the problem and increase the camera security.
Can WYZE detect animals?
With adjustable sensitivity settings and alternative large pet installation instructions, Wyze Motion Sensor is designed to detect people, not pets. The adhesive back makes it easy to install on walls with the option to use screws for added security.
Can you turn off sound on Wyze camera?
Note: It is not possible to change or control the volume of the audio produced or recorded by the camera’s speaker and/or microphone.
Can you turn off audio on Wyze camera?
No, it is not possible to control the volume of the audio produced or recorded by the Wyze Cam Outdoor. Membership discounts on Wyze products are only available on purchases on Wyze.com.
Can you turn off Wyze camera?
You can turn your Wyze Cam v3 either on or off through the Wyze app. This will allow you to keep the Wyze Cam plugged in, and use the Wyze app to turn it on/off.
How do you reset a WYZE motion sensor?
Use the included Reset Pin to poke the reset button on the sensor you’re adding, and hold it in until you see the red light flash at least 3 times. Name the sensor when prompted and test it out in the spot where you want to place it before using the adhesive backing.
Is WYZE a Chinese company?
In fact, Wyze is a Chinese company disguised as an American company. Its owner is a Chinese company called Hualai. In addition, Wyze uses a software solution called TUTK, so all Wyze’s data will pass through this company.
How long do WYZE sensors last?
12 months
Specs
| Color | White |
|---|---|
| Sensor Bridge Range | Recommend one Sensor Bridge per house |
| Sensor Bridge Capacity | Up to 100 sensors per Bridge |
| Power Source | Sensor Bridge: Wyze Cam or Pan Contact Sensor: CR1632 Motion Sensor: CR2450 |
| Battery Life | 12 months (replaceable battery included) |
Does the WYZE scale need to be calibrated?
The Importance of Calibrating the Wyze Scale
However, it is, in fact, important that the Wyze Scale is correctly calibrated. This is because if there is an internal error, your scale could read different measurements each day.
How do you zero a WYZE scale?
How do I factory reset Wyze Scale S?
- Tap on the scale surface to wake it up.
- On the back of the scale, press the reset button ~5 seconds until CLr displays.
- When CLr displays, your scale is reset.
How do I reconnect my WYZE scale?
If you’re having connection issues, follow these steps:
- Force close the Wyze app, then re-open it.
- Turn off your Bluetooth connection, then turn it back on.
- Navigate to Wyze Scale S in the app.
- Step on the scale to activate it. If Connected displays, you’re all set.
Contents