If you want to turn off sound detection for your home, toggle the switch next to Sound detection.
Turn off sound detection in the Home app
- Open the Google Home app .
- Tap Settings on the home screen.
- Choose Nest Aware.
- Select Sound detection.
Where can you change the settings for sound detection?
Go to sound detection settings in the Home app:
- Tap Settings in the Home app.
- Choose Nest Aware.
- Select Sound detection. From there, you’ll be able to change sound detection settings.
How do I turn off motion detection?
Enabling and Disabling
Motion detection can be enabled or disabled in several ways: Motion Detection Switch: Flip the switch next to the camera on the device list or tap into the Camera, then go to Options > Motion Detection. This will manually enable or disable motion detection.
How do I turn off Arlo sound detection?
This article applies to:
Follow these steps to edit an existing mode. To enable or disable motion or sound detection on Arlo cameras: Launch the Arlo app or log in to your Arlo account at my.arlo.com. Tap or click Mode.
How do I turn off sound detection on WYZE?
Go to the Account tab and select the Notifications tab. From here you can pick a specific device from the list and pick what triggers a notification. Enabling and disabling some of the triggers might lower the number of Notifications.
How do I turn off audio detection Arlo?
To turn off the Detects Audio setting:
- Launch the Arlo app or log in to your Arlo account at my.arlo.com.
- Tap or click Settings > Smart Notifications.
- Select the device for which you want to turn off Detects Audio.
- In the Audio Alerts section, deselect Smoke/CO Alarm and All Other Audio settings.
- Return to Settings.
Can you turn off motion detection on Arlo?
Tap or click the Arlo device whose mode you want to edit.If the mode that you are editing only has one rule, the rule is preselected for you in the Arlo app. Select or clear the check box next to Motion is detected to enable or disable motion detection.
How do I stop my motion detector from setting?
Keep adjusting until you get it just right. Reset your Motion Detector To reset your motion light, unplug it from its power source for a full 10 seconds. Plug it back in and allow it to come back on. This should reset your light and turn off the auto-on function.
How do you turn off a motion detector?
Turn off the motion detector. You can either do this by removing the batteries or just turning the switch off. If you are using a PIR, disconnect the red, yellow, and black wires from the control panel. Using your screwdriver, unmount the device from the wall.
How do you turn off motion sensors?
With a standard motion sensor light system, the lights stay on for two to 20 minutes when tripped, then shut off automatically. If you want the light to shut off sooner, simply adjust the duration usually a dial control to a shorter duration.
How do I turn off notifications on Arlo?
To enable or disable Arlo notifications at the Arlo app level:
- Launch the Arlo app on your Android device.
- Tap the menu icon ( ).
- Tap Settings > Notifications.
- Tap Notification Tone.
- Select None.
- Tap OK.
- Move the slider next to Vibrate to disable.
How do you turn off vehicle detection on Arlo?
In the browser, go to Settings > Manage Arlo Smart. On each device you can configure alerts for people, vehicles, animals, and other. Tip: Select “People” and unselect “Other” to only be notified when people are detected.
Are Arlo cameras activated by sound?
Armed cameras are set to trigger on motion (and sound, if your Arlo model can detect both motion and sound). Armed cameras record video for 10 seconds by default and automatically send notifications. Disarmed cameras do not trigger on sound or motion.
Can you disable the sound on a Wyze Cam?
Note: It is not possible to change or control the volume of the audio produced or recorded by the camera’s speaker and/or microphone.
How do I turn off the sound on Wyze?
To change the notification sound, swipe to close the Wyze app and go to your device’s Settings app. Then go to Sounds & Haptics (iOS) or Sound & notification (Android) to change your sound preferences.
Can you disable audio on Wyze camera?
Technically, you can disable the sound on your Wyze Cam live stream. There’s a microphone button you can see while viewing the live screen on the app. Tap on the mic icon and it will disable sound.
How do I turn off my Arlo mic?
You can turn off the microphone by going to the Arlo app or web client and going to Settings > My Devices > Choose your Arlo Ultra > Audio Settings > Toggle off “Microphone”.
How do I stop Arlo recording?
To disable local storage recording:
- Launch the Arlo app or log in to my.arlo.com.
- Select Settings > My Devices and tap or click on the Arlo Pro base station to which your USB device is connected.
- Select Local Storage.
- Tap or click the slider next to USB Device Recording to stop recording to your USB device.
Can I turn off notifications for one Arlo camera?
you must set up the rules for each individual camera.Click the cameras you don’t want notifications from and on the next screen to pop up, scroll down and deselect the Push Notifications. Hit Save and do that for the rest that you do want to hear from.
Do Arlo cameras detect sound?
Triggers can be motion detection, sound detection (on Arlo Ultra, Pro 3, Pro 2, Pro, Q Plus, Q, or Go cameras), or both. You can adjust the camera’s sensitivity to motion and sound to minimize false alarms.
How do I turn off Arlo sirens?
To turn the siren on or off:
- Launch the Arlo app.
- The Devices page displays.
- Tap the shield icon.
- Tap Activate Siren.
- If you have multiple compatible cameras, you are prompted to select one.
- Swipe the slider to turn on the siren.
- Turn off the siren by tapping the slider at the top of the Devices page.
Contents