Turn the gas regulator valve to the pilot position. If the water heater has a manual ignite button, press that to light the pilot. If it doesn’t have the button, or the button fails, press the regulator valve and hold a grill lighter or long match to the pilot light valve until the pilot ignites.
How do you relight an automatic pilot light?
Press the gas control knob down all the way and hold it in the depressed position. If you have no igniter, move the match or barbecue lighter flame to the end of the pilot tube; the pilot flame should light immediately. If you have a spark igniter, press the ignition button until the pilot flame ignites.
What do you do when your pilot light goes out?
Your pilot light relies on your natural gas to stay aflame, so if your gas is shut off, your pilot light will go out. Simply turn your gas back on and either relight your pilot light yourself or call a professional.
How do you reignite a pilot light on a gas fireplace?
Hold the pilot button down for about 20 seconds to give the thermocouple time to heat up, then release it. The pilot should stay lit, but if it doesn’t, relight it and hold the button a little longer. Turn the button to the On position, then replace the fixed glass assembly and the decorative cover. You’re done!
Why won’t my pilot light light on my gas furnace?
There are several possible reasons why your gas furnace pilot won’t light: an ongoing draft, a faulty thermocouple, an accumulation of dirt, or an inefficient supply.
Where is the pilot switch in my fireplace?
Locate the black knob on the left side (marked on/off/pilot). Push this button in and rotate counter-clockwise until the word Pilot lines up with the corresponding arrow.
Why won’t my gas fireplace light up?
If gas is coming out of the pilot, but it still won’t light, the spark igniter could be the problem. Alleyne says to look for and clear out any debris between the igniter and thermocouple.The pilot lighting, but not staying lit, indicates that the thermocouple is worn out, Worthen says.
What would cause a furnace pilot light to go out?
Thermocouple Malfunction
A thermocouple that is dirty or malfunctioning will often shut off your gas supply in error, causing the pilot light to go out and your furnace to stop working.
Should the pilot light always be on in a gas furnace?
Most furnaces with electronic ignition have a device called a hot surface igniter.The difference is that the flame is only lit (by an electronic spark) when your furnace is ready for a heating cycle. When the pilot light is not needed, it is completely off, saving you money on gas.
Should pilot light always be on fireplace?
Should the pilot light always be on in a gas fireplace? Most gas fireplaces rely on a continuous pilot light, a type of pilot that remains lit so long as gas is flowing to the unit.If you have a continuous pilot light system, you should always see a pilot flame unless you have manually turned the system off.
Can I manually light my gas fireplace?
Turn the knob from the Off to the Pilot position. Push in the pilot knob, which manually sends gas into the system. Push the igniter button once every second until it lights. Depending on how long it’s been since the gas fireplace was last used, ignition may take multiple attempts.
What does it mean when your pilot light won’t stay lit?
thermocouple
If your pilot light won’t stay alight, it might be the thermocouple. Sometimes dust buildup collects on the thermocouple and blocks the sensor. Try cleaning the thermocouple and then relighting the pilot light. If it continues to go out, the thermocouple might need to be replaced.
Can you manually light a gas fireplace with electronic ignition?
Re-lighting pilot lights is straightforward on today’s modern gas fireplaces. If you have an electronic ignition unit, using your remote control simply press the ‘on’ button and the pilot will re-ignite within a few seconds, followed by the fireplace a few seconds after that.
How do you restart a gas furnace?
How do you restart a gas furnace?
- Turn the circuit breaker off and switch the furnace power button off too.
- Access the pilot light by removing the access panel.
- Turn the gas control valve off and let the gas dissipate for five minutes before turning it back on in order to prevent a fire hazard.
How do I know if my furnace pilot light is on?
You’re probably familiar with a standing pilot light, the little blue flame that sits in front of one of the furnace burners. If your furnace has a small round knob on the gas valve with the words OFF/ON/PILOT, you have a standing pilot ignition.
Should you turn off pilot light gas fireplace?
We recommend that you turn off your gas fireplace pilot light seasonally. Turning off your gas fireplace’s pilot light can save a substantial amount of energy and money.So, if you see the word pilot written on the knob, you know that you have a standing or always on pilot light.
Should I turn off the pilot light on my gas fireplace in the summer?
Your Utility Bill
Perhaps the most important reason to turn off gas fireplace pilot light in summer is because of the money and energy you will be saving. If you leave the pilot light on during the summer it is simply sitting there burning gas, which is wasting gas and contributing to an exorbitant energy bill.
Is it OK to leave pilot light on gas fireplace overnight?
If you leave the pilot light on for long periods without turning on the main burner, a white film can develop on the glass. This is a sulfur byproduct of the burning pilot, and if left uncleaned, it can etch the glass. For natural gas, I’d leave it on. If it’s propane, I’d turn it off and take the risk.
Contents