How Do I Transfer Ownership Of August Smart Lock?

If you want to change a regular user on your August Smart Lock Guest List to an Owner, follow these simple steps:

1. In the August app, select the Guest icon on the lower right-hand side.
2. Choose the Guest you want to edit.
3. Change the Access Level from Guest to Owner.
4. Tap Update to save your changes.

How do I get rid of owner August lock?

If you are a device owner and you wish to remove a guest from your device, open the August App and go to the Guest List. Select the user you wish to remove from the app. On the next screen, select REMOVE USER. Select the Delete option on the message to complete the steps.

How do I unregister August lock?

Open the August App. Select the lock from your Keychain. Go to the Guest List. Select REMOVE SELF.

How do I factory reset my August connect?

How to Factory Reset an August Connect

1. 1 Factory Reset. Make sure your Connect is plugged in. Press and hold the button on the front of the front of the Connect for 3 seconds.
2. 2 Re-Setup? Factory reset removes everything from your August Connect. In order to use it again, you will need to re-setup the device.

How do you reprogram a smart lock?

Steps to re-keying Smart Key units (Note: You must have your Functioning Key and Learn Tool for this to work).

1. Insert functioning key & turn 1/4 turn clockwise.
2. Insert & remove the SmartKey learn tool. Remove functioning key.
3. Insert new key & turn 1/2 turn counter-clockwise. Done. Your lock is now re-keyed! “”

Can you reset a smart lock?

1 Factory Reset
Slide up the cover to open the back of your lock, exposing the buttons beneath. Push and hold the reset button for 10 seconds, until the lock beeps.The lock has now been restored and is ready to be set up again.

How do I reset my electronic lock?

A factory reset will delete all codes associated with the lock.

1. Make sure the door is open and unlocked.
2. Press and hold the program button for 30 seconds using the SmartKey tool or a paper clip. You will hear one long beep.
3. Press and release the program button. You will hear one short beep.

How do you reset the August bridge?

To perform a hard reset on your Connect, leave the device plugged in and hold the reset button down for 5 seconds, then let go. You should see a pulsating green light, which indicates that the device is back in set up mode. If you want to set up your Connect again, follow these set up instructions.

Can you have two August smart locks?

Each of your August Smart Locks will require an August Connect. They were built to work in tandem. The Connect is a wi-fi bridge that connects your lock to your phone no matter where you are. The Connect also enables every single feature the smart lock has.

Does August lock work without wifi?

Do August smart locks work without Wi-Fi? Yes, August smart locks can be operated without Wi-Fi as they can also connect via Bluetooth or Z-Wave. However, you need Wi-Fi if you’re looking to control your lock remotely. If you’re still curious about how the August smart lock works, you want to continue reading.

How do I reset my smart code door lock?

Hold the button continuously for 30 seconds until you hear a beeping sound and see the status LED flashing red. Press the program button once again until you see the status LED flashing green and hear two beeping sounds. The Kwikset SmartCode deadbolt has now been reset and ready to be set up again.

How do I reset my Z wave door lock?

Complete the following steps to factory default your Kwikset Z-Wave Lock.

1. Remove the cover. Take off the lock’s cover.
2. Power down the lock. Remove the battery pack.
3. Press and hold “Program”. Press and hold the “Program” button.
4. Power on the lock.
5. Wait for confirmation.
6. Finish the reset.

How do I identify my Kwikset?

Identification Methods

1. Name on the key or Lock: Kwikset or Schlage are the most common residential locks and keys.
2. Name Abbreviation: Kwikset is “KW” and Schlage is “SC” The most common keyways are KW1 & SC1.
3. Name on the lock latch: look at the edge of your door on the latch for a name.

How do I reconnect August lock to WIFI?

Android

1. Open the August App and select the associated Home from your Keychain.
2. Select the gear icon to navigate to Lock Settings.
3. Select the associated device to open Lock Settings.
4. Scroll to the Utilities section and select Connect to Wi-Fi Network.
5. Select BEGIN WI-FI SETUP.

Why is August lock unavailable?

If you are unable to operate the Smart Lock remotely using the App, your Connect Wi-Fi bridge may be offline. This article can help you get your August Connect back online. If you are unable to operate your Smart Lock using the App, we recommend rebooting the device.The lock will flash green.

How do I connect my august lock to WIFI?

Tap Set Up A Device.

1. Open the August Home App.
2. Tap the Menu icon.
3. Tap Settings.
4. Tap Set Up August Connect.
5. Tap Begin Scan to start connecting to Wi-Fi.
6. Type in your Wi-Fi password.
7. The Connect will show that is connecting.
8. Tap Done.

Can you manually unlock August Smart Lock?

Answer: Yes you can turn the August Lock manually to latch/unlatch the deadbolt manually from the inside. Additionally, you can use your existing key from the outside.

How long do august lock batteries last?

three to six months
The team at August estimates the lock’s batteries should last three to six months. That’s a shorter suggested lifespan than the six months to a year promised for the older, AA models. According to August, the no. 1 factor in battery life is the quality of your Wi-Fi connection.

Does August Lock work with ring?

August Smart Lock Pro also works with Ring Alarm. Ring Alarm is a DIY security system that incorporates security sensors, Z-Wave, Zigbee, and Ring cameras. With the integration, you create rules for your lock and security system to follow. For example, you can set it to arm your system when the door is locked.

How do I reset my Samsung home?

How to perform factory reset for Samsung Connect Home?

1. 1 Hold down the Reset button on the back of the device using a safety pin or similar tool for approximately 10 seconds.
2. 2 Release the Reset button when the LED on the front goes dark.
3. 3 Wait for the LED to flash red and green, indicating it is ready to connect again.

How do I reset my Samsung WIFI?

Reset Network Settings – Samsung Galaxy S® 5

1. From the Home screen, navigate: Apps. Settings. Backup and reset. .
2. Tap. Reset network settings. .
3. Tap. Reset Settings. .
4. If applicable, enter the PIN, password, fingerprint or pattern then tap. Reset Settings. again to confirm. A “Network settings reset” pop-up should briefly appear.