How Do I Sync My Wyze Base Station?

To do this: In the Wyze app, tap on your Wyze Base Station. Tap on the Settings gear on the top right.


Select your network.

  1. Follow the onscreen steps to connect to your WiFi network.
  2. Once connected, unplug the Base Station from your router.
  3. The status light will flash blue, then turn solid once complete. You’re all set!

How do I get my WYZE base station back online?

Troubleshooting Steps

  1. Make sure you have the latest version of the Wyze app here.
  2. Check your Base Station for firmware upgrades.
  3. Make sure you’re interacting with the right Base Station if you have more than one.
  4. Verify the status light color to make sure the Base Station is set up and functional.

How do I reset my WYZE base station?

Reboot your Wyze Base Station to reestablish the connection.

  1. Unplug the base station from power, wait 5-10 seconds, then plug it back in.
  2. Once the status light is solid blue, the reboot is complete.

How do I connect my WYZE base station wirelessly?

To use your base station wirelessly:

  1. In the Wyze app, tap on your Wyze Base Station.
  2. Tap on the Settings gear on the top right.
  3. Tap Device Info > Change Connection. You’ll see one of the following screens: Select your network. Follow the onscreen steps to connect to your WiFi network.

Does the WYZE base station have to stay connected to the router?

Unlike other Wyze devices, the Wyze Base Station requires a wired connection to your router during setup. You will not be able to set up the Base Station without a router.

See also  What Is The Best Motion Sensitivity For Arlo?

What is WYZE Base Station password?

Tap Go to WiFi selection, then select the network that looks like “Wyze_bind_xxx”. No password is required to connect to this network.

How do you power cycle a WYZE?

To power cycle your camera:
This can be done either from the power outlet, or from the camera itself. Allow 5-10 seconds to pass for the camera to completely discharge. Plug the camera back into the power source and allow it reinitialize.

How do you set up a WYZE outdoor base?

To set up your Wyze Cam Outdoor:
In the Wyze app, tap Home, then tap + plus sign on the top left. Tap Add Device. Tap Cameras > Wyze Cam Outdoor > Begin setup. If you don’t have a Wyze Base Station on your account, or your Base Station already has 4 paired cameras, you’ll be directed to set up a Base Station here.

What is error code 90 on WYZE?

Error code -90
This error means that your Wyze Cam can’t be reached by the streaming servers. Remove the microSD card if you have one.

Why is my WYZE flashing blue?

Make sure it’s properly connected to power.
Status Light Guide Detailed.

Status light state: What does the light mean?
Flashing red and blue lights Camera is trying to connect to WiFi Scanning QR code Upgrading with a microSD card Or, possible error state: Network disconnected

Does Arlo base station need to be connected to router?

Each base station must be connected to your router using an Ethernet cable. Note: You can also connect an Arlo or Arlo Pro base station to a WiFi extender if the extender has an available Ethernet port.

See also  What Is Difference Between Front And Rear Camera?

Can you connect WYZE cam to Ethernet?

The WYZE camera, currently not set up for ethernet connectivity, does not have an adaptor ready for an ethernet cable. However, purchasing a splitter that has an ethernet/Micro USB connector on the other end will help complete this connection.

Does WYZE need WiFi?

You must have an internet connection to set up the camera and configure it with the Wyze app. And if you have a microSD card inserted and Local recording to microSD card turned on in your settings, the camera will continuously record to that microSD card, even if offline.

How many WYZE cameras are in a base station?

You can connect up to 4 Wyze outdoor cameras per Base Station, and a wired Ethernet connection is required for installation. After initial set up, however, you have the option of either keeping the wired connection, or switching to a wireless Wi-Fi connection via the Wyze app.

Why does my WYZE camera say Cannot connect to local network?

Forget all WiFi networks, restart your phone/tablet, then reconnect to your 2.4 GHz network. On iOS: In the Settings app, tap General > Reset > Reset Network Settings. On Android: In the Settings app, tap General management or System, tap Reset or Reset Options > Reset Network Settings. Confirm the reset.

How do I scan a QR code with a WYZE camera?

Hold your phone’s screen steady in front of your Wyze Cam, and move or adjust the distance slowly. Hold still at the new distance for 5 seconds to give your Wyze Cam time to focus at the new distance. Try holding the QR code upside down for the Wyze Cam to scan.

See also  How Do You Set Up A Reolink Solar Camera?

How do you do a power cycle?

How to power cycle a device

  1. Turn off and/or unplug the device.
  2. Wait at least 30 seconds.
  3. Plug in the device and/or turn it back on. That’s it—you just power cycled your device! With any luck, it should start working correctly.

What does power cycle the WYZE camera mean?

fully powering an electronic device off
Power cycling refers to fully powering an electronic device off, usually disconnecting it from any source of power. This is a useful troubleshooting tool because it helps reset the device and its connections. Membership Discounts.

Why is my WYZE camera blinking red?

Flashing Red, Red and Blue, or Blue
Power cycle the camera by unplugging the power and plugging it back in. If the camera returns to flashing red but never reconnects, set the camera up as a new device.

Can you connect WYZE v3 to base station?

Wyze Cam v3 is a wired camera that connects to your WiFi network directly, similar to almost all Wyze devices, including the Wyze Cam v2 and Pan. You do not need a base station to use it.The base station is not compatible with the v3 at all.

Does WYZE outdoor camera have to be plugged in?

In addition to being powered through the Micro USB port, the Wyze Cam Outdoor has an internal battery that allows it to work without being plugged in.

Contents

This entry was posted in Smart Camera by Ruben Horton. Bookmark the permalink.
Avatar photo

About Ruben Horton

Ruben Horton is a lover of smart devices. He always has the latest and greatest technology, and he loves to try out new gadgets. Whether it's a new phone or a new piece of software, Ruben is always on the forefront of the latest trends. He loves to stay up-to-date on the latest news and developments in the tech world, and he's always looking for ways to improve his own knowledge and skills.