You can prevent a faulty pilot light from wind by fixing your thermocouple, gas release, protecting against downdrafts, capping your chimney, and checking your firebox cover.
Why does my pilot light go out when it’s windy?
A: Wind, especially strong wind in a specific direction, can indeed enter a flue and travel into the burn chamber of a gas appliance. And that can, under those rare circumstances, cause intermittent problems with a pilot staying lit.A thermocouple is a safety device that works in conjunction with the main gas valve.
Why does my water heater go out when it’s windy?
If the water heater pilot blows out when windy, then the thermocouple is might be responsible for that. It is the flame sensor and maintaining the flame is its responsibility. Due to excessive use, the device can be dirty, broken, or misaligned.A faulty thermocouple doesn’t see the flame and cut off the gas supply.
How do you trick a thermocouple?
The thermocouple always thinks the pilot is not lit, even if it is. To get hot water, I have to light the pilot, then hold the match on the thermocouple to trick it into thinking the pilot light is touching it. Once it’s warm enough, I pull the match out and turn the knob from “Pilot” to “On”.
How do you clean a pilot light?
How to Clean a Pilot Light
- Cut off the gas to your furnace.
- Remove the pilot light and thermocouple assembly.
- Use your pliers or wrench to remove the pilot light and thermocouple from the bracket.
- Using the wire brush, brush away the carbon buildup and soot from both components.
Why won’t my pilot light stay lit on my propane heater?
If the thermocouple is too far from the flame, this can cause the pilot to go out and shut down the propane heater; you can fix this easily by moving the thermocouple closer to the flame. The thermocouple could also be worn out, in which case it needs to be replaced.
Does gas leak if pilot light goes out?
If the pilot light goes out on a storage or instantaneous hot water heater, space heater or a ducted heater, you will not have a gas leak. This is because all modern gas appliances with pilot lights have a fail-safe device that closes off the gas to the appliance in the case when the pilot may go out.
Why does pilot light go out on boiler?
Usually, a problem with the thermocouple causes the pilot light to go out. The thermocouple is the small copper rod that the pilot light hits.Common thermocouple problems include: Dirt/soot on the thermocouple Any buildup on the thermocouple can block the flame, preventing it from being properly heated.
Should the pilot light always be on in a gas furnace?
Most furnaces with electronic ignition have a device called a hot surface igniter.The difference is that the flame is only lit (by an electronic spark) when your furnace is ready for a heating cycle. When the pilot light is not needed, it is completely off, saving you money on gas.
What is water heater Backdrafting?
Backdrafting is a dangerous situation where toxic combustion gases are not properly vented. Instead of rising up through a chimney and releasing outside, some exhaust gas enters the home. Backdrafting is primarily a concern with atmospheric venting gas water heaters.
Is there a way to bypass a thermocouple?
To bypass the thermocouple: Move the tilts switch wire aside. Remove your thermocouple from the heater using an 8mm wrench. Pull the valve housing aside using your 13mm socket wrench.
Can a thermocouple be cleaned?
Yes, you can clean a thermocouple, but the task must be done with a light touch. Remove the thermocouple from the process assembly, using a steel wool or emery cloth, lightly clean the tip removing any build up.
Why does my gas logs keep going out?
A common problem with gas fireplaces lies in the components called the ignition assembly. When a fireplace refuses to remain lit, there’s probably an issue in one of the several pieces that make up the ignition assembly, which are: the pilot light assembly, pilot tubing, thermocouple, and thermopile.
Why is my pilot light yellow?
The most common reason why a pilot light would start to burn yellow is that the air intake valve to the pilot light is clogged with dirt.If there is a small amount of dirt blocking the air, the yellow color might only be at the tip of the flame. If there is a large amount of dirt, the entire flame will burn yellow.
Can a pilot light get clogged?
Like all things that use combustion, pilot lights can get clogged up with soot and carbon residue and need to be cleaned periodically. If you’ve noticed your fireplace, thermostat or wall heater pilot light won’t stay lit, a dirty pilot light may be to blame.
What are the symptoms of a bad thermocouple?
If you can’t get the flame to light at all, and you’re sure the gas is on, there’s probably an obstruction in the pilot tube. If the flame lights and goes out when you release the gas control knob after holding it in for the recommended 20 to 30 seconds, that’s the sign of a thermocouple malfunction.
How do you adjust the flame on a propane heater?
All you will need to do is to twist the adjustment screw of the flame till the flame goes from one and half inches to two inches, which is about 4 to 5 centimeters high. Look for the adjustment screw on the pilot assembly close to the gas valve if the control valve has this adjustment feature.
How do you fix a boiler pilot light?
How do you relight the pilot light on a boiler?
- Turn the gas to ‘pilot. ‘
- Press and hold the reset switch for one minute and hold a flame to the pilot light at the same time.
- If all is working as expected, return any casing/doors and turn the gas from ‘pilot’ to ‘on.
Why won’t my pilot light stay lit on my boiler?
If it’s not staying lit though, then you’re probably dealing with a thermocouple issue. The thermocouple of a boiler system is a long metal wire that acts as a heat sensor for the pilot light.If the pilot light goes out, then the electrical current stops, and the gas valve closes.
Should I turn off the pilot light on my furnace in the summer?
Shutting your pilot light and gas supply off in the summer not only saves precious energy, it’ll save you money as wellas much as $50 a year. Shutting your pilot light and gas supply off in the summer not only saves precious energy, it’ll save you money as wellas much as $50 a year.
Should you turn off the pilot light on a gas furnace?
Most modern mid to high efficiency gas furnaces no longer have a pilot light. It’s been replaced by an electronic ignition. As a result, the furnace will not need to continuously burn gas in order to keep a pilot light going, making it unnecessary to turn off your furnace for the summer.
Contents