How to view your IP camera remotely via a web browser
- Find your camera’s IP address.
- Open a web browser and type the IP address.
- Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.
- After you change the port, you will need to reboot the camera in order to save the changes.
iCSee Pro
- Open ICSee Pro on the new device and click Local Login.
- Click the + icon in the top right corner.
- Click Add Shared Device.
- Tap the button that says ‘Scan Device QR Code’:
- Point the phone/tablet camera directly at the QR code being displayed on the phone/tablet/computer that the camera is being shared from:
5) Camera sharing: Once you tap symbol, it will show Device Sharing screen. Please enter the email account of the person you like to share the camera and tap Invite (the person should have installed the V380 Pro app and registered an email account during initial installation of the app).
Can I connect more than one phone to the same camera?
No, you cannot connect more than one phone to the same camera at the same time. However you can unpair the previous phone with the camera and connect using a new phone again.
How do I find the IP address of my IP camera?
Firstly go to the My Camera page in the app, tap the arrow to the right of the camera and then select the “Edit camera” symbol. You will then be taken to the Edit Camera screen, from here tap Advanced Settings, then on the Advanced Settings page tap About device. The cameras IP address will be shown under “local”.
How do I setup my IP camera for remote viewing?
Way 2: Set up IP Cameras for Remote Viewing via Port Forwarding
- Step 1: Find the IP Address of Your Security Camera.
- Step 2: Check the WAN/External IP Address of Your Router.
- Step 3: Check the Camera Port Numbers & Forward Ports to the Router.
- Step 4: Set up port forwarding to your router.
How do I connect two cameras to my phone?
How do I connect Google Clips to additional phones?
- Step 1: Set up camera sharing. Open the Google Clips app and connect to your camera. Tap Settings Share camera .
- Step 2: Connect additional phones. On another phone, install and open the Google Clips app.
Where is serial number on iCSee camera?
You can find the serial number of this camera at iCSee—Setting—-General About Device—Serial number. You can send this Serial Number of the camera and the password to your friend.
Go to the live feed of the camera and open the settings menu by selecting the pen and paper icon at the top right of the screen. Scroll to the bottom then select ‘Share Device’. Now select ‘Add Sharing’ at the bottom of the screen.
How do I connect my V380 Pro to another phone?
Configuration steps:
- Click the + button in the upper right corner of the device list -> select [Add Camera]
- Select [WiFi Smart Camera]
- Select [AP hotspot connection] and follow the system prompts to continue operation.
- Select the WiFi that the device needs to configure, and enter the WiFi password -> click [Confirm]
Can V380 work without WiFi?
The answer is “Yes!!!! You can still let security cameras work without the Internet. For your farm, rural home, garage, and other remote areas without an Internet connection, you can try to use the V380 security camera AP mode.For example, set a recording plan, let the camera start recording even without a network.
How many devices can V380 connect?
V380 APP supports 4 cameras on one quad view on mobile devices(NVCMS software for Windows PC is the same), so you can mix stationary eweton ip cameras. Again, V380 APP supports 4 mobile devices to see 1 camera at the same time as long as network status permits.
For example, Reolink RLC-423 and other PoE IP cameras allow up to 12 people (same account) to view live feeds at the same time on Smartphone, computer (Windows/Mac), or laptop, which supports up to two users streaming in mainstream (stream with highest-resolution and clarity) concurrently.
How to Add Users Account for Reolink Cameras via Reolink App
- Applies to: All Reolink cameras and NVRs excluded battery-powered cameras.
- Login your device via Reolink App and then go to Device Settings ->Advance->User Management->admin->Add User page.
- Edit a user name, enter the password and confirm the password.
How do I add a Reolink camera to my phone?
Launch Reolink App, click “+” on the top right of the Devices page to add a new device. Step 2. For local access, we recommend you to add device by scanning the QR code. Note: You may tap Light to enable flash light when setting up in a dark environment.
How to share devices linked to Xiaomi Home with another person or account
- Access the Xiaomi Home application and then go to the lower tab «Profile»
- Then we will enter the option « Share «
How do you save a video from MI camera?
Open MI Home
- Select Manage Storage.
- Tap on NAS Network Storage.
- Enter with blank username and password, if you have none.
- Slide on Video Storage.
- Select Video Length.
- Select Interval between uploads.
- Data Storage Setting – Select the Map Network Drive that you have created in step 1 above.
What is Reolink default password?
blank
Reolink default username is admin and the default password is blank(no password). If you forget the password, you may choose to reset your device. Note: For Reolink NVRs, you may press the reset button or use super-password to reset the admin password to default.
How do I change my Reolink IP address?
How to Change Camera’s IP Address to Static IP Address via Reolink Client (New Client)
- Please launch your Reolink Client and click the “Device Settings” icon.
- Click Network->Set up.
- Change the Connection Type in Network Settings from DHCP to Static, then click “Save” to confirm.
How can I see my security cameras on my phone?
How to Connect Your Security Camera(s) to Your Phone
- Install our security camera mobile app on your device.
- Launch the surveillance app and add your security camera(s)
- Click the security camera(s) linked to your cell phone and enjoy live viewing.
Contents