How Do I Setup My Wyze Sense Keypad?

3. Set up your keypad and sensors

  1. Tap Wyze Sense Keypad in the Wyze app. Turn the keypad around so the back is facing you.
  2. Tap Next in the Wyze app. On the back of your Wyze Keypad, press and hold the reset button until the Home button starts flashing white.
  3. Name your Wyze Keypad in the Wyze app.
  4. Tap Finish.

How do you program a WYZE keypad?

Press and hold the Lock button on the Keypad until the light is flashing green. Tap Next in the Wyze app. The Keypad will automatically proceed through setup until it connection is complete. You’re all set!

How do I change the code on my WYZE keypad?

To create a new code:

  1. In the Wyze app, tap on the related Wyze Lock.
  2. Tap the gear icon to open your Settings.
  3. Tap Keypad Settings > Access Codes.
  4. On the Access Codes screen, you can: Modify your personal code by tapping Reset Code. Add a new Guest Code by tapping Create a Guest Code.

How do you set up a WYZE sense?

Follow these steps to add a sensor:

  1. Open the Wyze app.
  2. Check your camera’s firmware to make sure it’s up to date.
  3. From the Home Tab tap the + plus sign on the top left.
  4. Select Add Device.
  5. Tap Sensors > Wyze Contact Sensor or Wyze Motion Sensor.
  6. On the next screen, select the camera you want to connect your sensor to.

How do I reset my WYZE sense?

Factory reset Wyze Sense Hub.

  1. In the Wyze app, tap on your hub, then the Settings gear > Delete Device.
  2. Single-press the reset button on the back of the hub.
  3. In the app, tap the + plus sign > Add Device > Sensors > Wyze Sense Hub.
  4. Set up your hub again.
See also  What Battery Is 3V?

How do I reset my WYZE sense hub?

Press and hold the Reset button on the back of the hub for 10 seconds. This will power cycle the hub. Try to connect the hub again.

How do I change the battery in my WYZE keypad?

How do I replace the batteries in my Wyze Sense Keypad?

  1. If your keypad is mounted, grasp the keypad and push upwards to remove it.
  2. Turn the keypad around so the back is facing you.
  3. Slide the back cover of the keypad down to remove it.
  4. Remove the old batteries.
  5. Insert new batteries.

How do I reconnect my WYZE sense hub?

Connect Wyze Sense Hub to your router via ethernet.
Troubleshooting

  1. In the Wyze app, tap the + plus sign > Add Device.
  2. Tap Sensors > Wyze Sense Hub.
  3. Single-press the Reset button on the back of the hub.
  4. Follow the in-app instructions to set up the hub.

Why is my WYZE sensor not working?

Remove the Bridge from the camera and Power Cycle the camera by unplugging the USB power cord, waiting 5 seconds, and then plugging the Bridge back in. Try moving the Bridge and sensor closer together. This can help with disruptions due to distance and obstacles.

How do I get my WYZE sensor back online?

Do this by taping the On/Off button to the right of the camera’s listing on the Home tab. If the sensor still shows as offline, remove the Bridge from the camera and Power Cycle the camera by unplugging the USB power cord, waiting 5 seconds, and then plugging the Bridge back in.

See also  How Do I Enable Wireless Connection?

Why is WYZE camera not connecting to WiFi?

Forget all WiFi networks, restart your phone/tablet, then reconnect to your 2.4 GHz network. On iOS: In the Settings app, tap General > Reset > Reset Network Settings. On Android: In the Settings app, tap General management or System, tap Reset or Reset Options > Reset Network Settings. Confirm the reset.

Is WYZE sense discontinued?

Wyze Sense is currently not available. Stay tuned for the next generation of Wyze Sense.

Does WYZE work without Internet?

If your home WiFi goes out you won’t be able to remotely lock or unlock Wyze Lock, but you won’t be locked out! Wyze Lock uses Bluetooth when you’re near the door so you can always get in… even if your home’s WiFi or power are out.

How do you unlock a WYZE camera?

Tap your Wyze Lock from the Home screen. Tap the gear-shaped icon to open Lock Settings. Tap Auto-Unlock.

What is a WYZE lock Gateway?

Wyze Lock Gateway is the communication hub for your Wyze Lock, and is necessary for it to talk to your network. If you run into any trouble with the setup process outlined on this page, check out Gateway setup troubleshooting for tips to get it working.

How do I connect my WYZE hub to WiFi?

To do this:

  1. In the Wyze app, tap on your Wyze Base Station.
  2. Tap on the Settings gear on the top right.
  3. Tap Device Info > Change Connection. You’ll see one of the following screens: Select your network. Follow the onscreen steps to connect to your WiFi network. Once connected, unplug the Base Station from your router.
See also  Are Stanley Tools Good?

Why do my WYZE bulbs keep going offline?

Check that the bulb is plugged in and turned on at the light socket or physical switch. The bulb requires a constant power source to stay connected. If connected to a dimmer switch, make sure the dimmer switch is set to maximum to ensure the bulb is getting the power it needs.

What is error code 90 on WYZE?

Error code -90
This error means that your Wyze Cam can’t be reached by the streaming servers. Remove the microSD card if you have one.

Is WYZE compatible with Home Assistant?

Unfortunately, Wyze has never been open to third-party integrations, such Home Assistant. There isn’t even an official API for developers to hook in to.But as is the case with many unofficial APIs, Wyze has decided to put a stop to it.

How do I add a repository to Home Assistant?

A user can add a repository by going to the Supervisor panel in Home Assistant, clicking on the store icon in the top right, copy/paste the URL of your repository into the repository textarea and click on Save.

Is WYZE HomeKit compatible?

Wyze Cam is currently not compatible with SmartThings or HomeKit.

Contents

This entry was posted in Smart Lock by Ruben Horton. Bookmark the permalink.
Avatar photo

About Ruben Horton

Ruben Horton is a lover of smart devices. He always has the latest and greatest technology, and he loves to try out new gadgets. Whether it's a new phone or a new piece of software, Ruben is always on the forefront of the latest trends. He loves to stay up-to-date on the latest news and developments in the tech world, and he's always looking for ways to improve his own knowledge and skills.