How Do I Setup My Shaw Hitron Modem?

How do I activate my Shaw hitron modem?

Activating your Shaw WiFi modem
Attach one end of the coax cable to your modem and the other to the coax cable outlet. Attach the power cord from your modem into the electrical outlet. Once the coax and power cables are connected, your modem will activate automatically. The activation process can take up to 15 minutes.

What lights should be on my hitron modem?

LED: Downstream
Green, flashing: The router is searching for a downstream frequency on the CABLE connection. Green, steady: The router has successfully located and locked onto a downstream frequency on the CABLE connection. Blue: The router is engaged in channel bonding on the downstream connection.

How do I setup my Shaw modem?

Connect the power cable to both the modem and a wall outlet. To connect your devices to WiFi, select the SSID network labelled on the front or top of your modem. When prompted for a password or passphrase, enter the Password (sometimes referred to as the WiFi Key) as found on the modem.

Is hitron a modem and router?

The Hitron modem replaces your existing router to handle your primary network. Static IP setup, port mapping, and other commonly required customizations are supported.

How do I find my hitron username and password?

Enter the following default settings to access the modem settings and select Login:

1. Username: cusadmin.
2. Password: password (or your current Wi-Fi password)
3. If you can’t log in, see the links within the note at the bottom of this page.

Is my Shaw modem also a router?

Your Shaw modem acts as a router for your home, but if you would prefer to use your own third party router, you can.

What lights should be on Shaw modem?

Each Shaw modem has an online light, which should be a solid light when things are working well. If the online light is flashing, you may have a connection issue. Hitron modems: lit up ‘@’ symbol, located 4th light down on front. All other modems: 4 light down on front with ‘Online’ label.

Why is my Shaw Internet not working?

Power cycle your equipment
Restarting your equipment is often the quickest way to solve Internet connectivity problems. Unplug the power cord from your Shaw modem. Wait at least 30 seconds, then plug the power cord back into your modem. Wait a few minutes until the modem comes back online.

What do blue lights on hitron modem mean?

Historically, the US light on my Hitron CGNVM cable router was steady blue.Steady blue means “The CGNVM is successfully engaged in channel bonding on the upstream connection.”

How do I connect to my modem?

To connect it to your computer, plug one end of an Ethernet cable into the Ethernet or LAN port on the back of your modem, then plug the other end into the Ethernet port on the back of your computer. Your modem should come with an Ethernet cable, but any old Ethernet cable will do.

Where is WPS button on hITRON modem?

If you have not changed them, the default values are indicated on the sticker on the rear of the unit. Press this button to begin the WiFi Protected Setup(WPS) Push-Button Configuration (PBC) procedure.

How do I connect to Shaw WiFi?

Connecting to Shaw Go WiFi

1. Visit your nearest hotspot. To find a hotspot near you visit shaw.ca/internet/wifi.
2. Open Settings.
3. Select Wi-Fi.
4. Select ShawOpen from the available networks.
5. Complete your registration by signing in with your Shaw ID.

What WiFi is hitron?

WiFi Built in
That’s why Hitron’s family of cable gateways feature the latest WiFi technology. Choose from our line of 802.11ac WiFi 5 gateways for rock solid coverage for smart home, gaming, media and streaming applications.

How do I change my Shaw router settings?

Change your BlueCurve WiFi name and password on desktop

1. Open BlueCurve Home (web portal).
2. Select Connect.
3. Select See Network.
4. Select Edit WiFi.
5. Select WiFi Name or WiFi Password to change them.
6. Once you’re done, select Apply Changes, and you’re all set!

What is my hitron username?

Hitron router login normally has a default username “cusadmin“, and the default password “password“. Its default IP address is 192.168. 0.1. These Hitron credentials are needed when doing a login to the Hitron router’s web interface to change any settings.

How do I reset my Shaw modem?

Locate the small pin-hole reset button located on the back of the Shaw WiFi Modem. Push and hold this button down for 15 seconds with a paper clip or pen. This will cause the modem lights to begin to flash and after a few moments, the modem will come back online.

How do I log into my hitron coda 4582?

To access the settings of your WiFi modem:

1. Open a web browser (Internet Explorer, Firefox, Safari, Chrome, etc.)
2. In the address bar, type: 192.168.0.1 [Then press the Enter Key]
3. Enter Username*: cusadmin.
4. Enter Password*: [Enter Password]
5. Click Login.

Does Shaw hitron modem have WiFi?

With the Hitron CGNM-2250 you have access to two WiFi networks: a 2.4 GHz network and 5.0 GHz network.

How do you bridge hitron CGNM?

How to Bridge your Hitron CGN3 or CGN3ACR Modem

1. Open a web browser and visit 192.168.0.1.
2. Sign in using the following credentials: Username: Cusadmin.
3. Select Basic.
4. Select the Gateway Function tab.
5. Select Residential Gateway Function.
6. Select Disable.
7. To finish, select OK when prompted.

Is hitron CGNM-2250 a router?

Hitron Docsis 3.0 Intel Puma 6-MG 24×8 w/ 3×3 802.11n + 802.11ac dual band and MoCA 2.0 Speeds up to 960Mbps Wireless Gateway Modem Router CGNM-2250.