How Do I Set Up Reolink Alerts?

Click Settings -> Notifications on your smartphone, and then click Reolink App to allow notifications.

1. For iOS devices:
2. For Android devices:
3. Launch Reolink App on your smartphone, and then click the button in the picture below to enter the Device Settings interface.
4. Click the Push icon to enable push notifications.

Why is Reolink not sending notifications?

The PIR sensor is disabled or the alarm schedule is incorrect. Solution: Log into the camera on Reolink App. Go to Device Settings and enable PIR Sensor. Then go to PIR Settings -> Schedule to schedule the alarm according to your personal needs and click Save to save the change.

How do I set up email alerts on my Reolink camera?

You may follow the steps below to set up an email alert for your device on Reolink Client.

1. Log in to your camera and go to camera Settings-> Surveillance -> Email.
2. Fill in the information required.
3. You will see Succeeded if the email is set up successfully.

Does Reolink have an alarm?

Applies to: All Reolink Products. There are three types of alarm that you can get when the camera detects a motion: Push notification, Email alert, and Audio alarm.

How do I change the notification sound for Reolink?

Go to the Setting page on your phone.

1. Click Notification & Status Bar, and then select Manage Notifications.
2. Find and enter the Reolink notification setting page.
3. Enable Allow Notifications and Notification Sound and Vibration to make sure you can receive the push notification.

What are Reolink push notifications?

Enabling push notifications will allow Reolink App to send alerts to your smartphone when motions are detected. You may also want to know: Enable Push Notifications on iOS and Android Phones.

Why is Reolink not connecting?

Make sure that you choose the same Register Mode as Reolink App. Check whether your computer has been connected to Internet successfully. Check if the computer’s firewall has been configured properly. If you haven’t set the VPN, please also close the VPN on your computer.

How do I adjust Reolink sensitivity?

How to Set up Motion Detection Sensitivity via Reolink App

1. Launch Reolink App, then tap on the gear icon to go to the Device Settings page of the camera.
2. Go to Alarm Settings-> MD Settings -> Sensitivity page to set up the sensitivity of motion detection.

Why is Reolink beeping?

The NVR’s keeping beeping may be caused by motion buzzer, video loss buzzer, exception buzzer, or the stuck system.Solution: The NVR may have experienced a camera’s video loss and thus trigger the beeping. To solve the video loss issue, you can contact the Reolink Support.

What is siren on Reolink camera?

Hillary. Applies to: Reolink cameras with the speaker. Camera with audio alarm or siren can make a loud prolonged sound as a signal or warning when camera detects motion alarms. You can also manually turn on audio alarm for the cameras mentioned above.

How do I get notifications on Reolink?

Click Settings -> Notifications on your smartphone, and then click Reolink App to allow notifications.

1. For iOS devices:
2. For Android devices:
3. Launch Reolink App on your smartphone, and then click the button in the picture below to enter the Device Settings interface.
4. Click the Push icon to enable push notifications.

How do I make my push notifications louder?

1. Press the volume key on the side of your phone and move the slider to adjust the volume. 2. Click Settings -> Sounds on your smartphone, and then move the slider to adjust the volume.

How do I turn up the volume on my Reolink camera?

Launch Reolink Client and log in to the camera, then go to Device Settings -> Camera->Audio and Light page to enable the Record audio switch. Step 2. On the bottom of the live view page, please drag the volume control button to adjust the volume to the largest.

How do I enable push settings?

From the “Settings” menu, tap “Notifications”. From here, find the app you wish to receive push notifications for. From here, tap “Allow Notifications” and then choose your options for how you wish to receive push notifications: a.

Does Reolink work with Ifttt?

Sorry that Reolink cameras don’t support IFTTT.

What is Reolink default password?

blank
Reolink default username is admin and the default password is blank(no password). If you forget the password, you may choose to reset your device. Note: For Reolink NVRs, you may press the reset button or use super-password to reset the admin password to default.

How do I connect my Reolink camera to my phone?

How to Do Initial Setup for Reolink Go via Reolink App

1. Tap on the icon in the top right corner to start configuration.
2. Scan the QR code on the back of the camera.
3. Create the login password and click Next to continue.
4. Name the camera, then click the button Next to enter the next page.

Where is Reolink NVR IP address?

You may locate their default IP address when connecting your device directly to your PC with an internet cable. Step 2. Connect the camera directly to your PC with a network cable. You will find the default IP Address of your devices like the example below.

How configure Reolink NVR?

How to Do Initial Setup for WiFi NVR on the Monitor

1. Applies to: RLN4-211W; RLN4-210W.
2. Connect the NVR to a Monitor or TV via VGA or HDMI cable.
3. Connect the mouse to the USB port.
4. Connect the NVR to the power supply and turn it on.
5. Power on the NVR and the camera.
6. During the startup, you will see the below splash screen.

How do I set motion zone on Reolink?

How to Set up Motion Detection Zones via Reolink App

1. Launch Reolink App and log in to the camera, then go to Device Settings -> Alarm Settings->MD Settings-> Motion Zones page.
2. Select no-alarm areas within the monitoring range with the Pen.

How do I adjust my Reolink camera?

The Sensitivity setting of Reolink cameras is controlled by a slider, allowing you to set a value between 1 to 50. You may drag the slider to the left (right) side to set the motion detection sensitivity. The higher the level, the more sensitive the motion detection.