How Do I Set Up My Ecobee?

How do I connect my ecobee to WIFI?

To connect your Ecobee thermostat to your Wi-Fi network:

  1. From the Home screen, press Menu.
  2. Then select Settings.
  3. Go to Wi-Fi.
  4. Make sure Wi-Fi Radio is Enabled.
  5. Go to Network.
  6. Tap on Select Wi-Fi Network.
  7. Pick your Wi-Fi network from the list and enter your Wi-Fi password if required.
  8. Tap OK to exit.

How do I reset my Ecobee thermostat?

How to Factory Reset an ecobee Smart Thermostat

  1. From the Home screen, press Menu.
  2. Select Settings.
  3. Go to Reset.
  4. Choose Reset All Settings then confirm your selection by pressing Yes.
  5. Choose the reset option that suits your needs:
  6. The ecobee thermostat will be reset to factory defaults.

How do I get a new registration code for ecobee?

Tap the three horizontal bars on the bottom left corner of the ecobee thermostat screen to open the MAIN MENU. Tap REGISTRATION. If it says “2 Steps Left,” you will first be directed to the Wi-Fi set-up and your code will be generated once Wi-Fi setup is completed.

How do I connect my iPhone to my ecobee thermostat?

ecobee app (iOS 11+)

  1. Open the ecobee app on your iPhone.
  2. Tap the Account icon in the bottom right corner.
  3. Select HomeKit under Integrations in the Menu.
  4. Tap + on the top-right corner.
  5. Choose Add Thermostat from the drop-down menu.
  6. Select the home you’d wish to add your ecobee to, then tap Next.

How do I connect my thermostat to WIFI?

Sign in to your Wi-Fi network

  1. Press the thermostat ring to bring up the Quick View menu.
  2. Select Settings .
  3. Turn the ring and Select Network.
  4. Select the new Wi-Fi network name and enter the new password. It may take a few moments for your network to appear.
See also  How Do Utility Companies Read Water Meters?

What is my ecobee access code?

For security purposes, the access control code can only be released to the email address that’s registered to your ecobee. The best way to reset the code is to login to the Web Portal and disable Access Control remotely: Login to ecobee.com. Click on SETTINGS > ACCESS CONTROL.

How do I turn on ecobee AC?

The cooling set point is blue while the heating set point is orange. To enable this system mode, go to Main Menu > Settings > Installation Settings > Thresholds > Auto Heat/Cool and select Enable.

How do I calibrate my Ecobee thermostat?

To Configure Temperature Correction

  1. Press Menu on the main screen.
  2. Go to Settings.
  3. Then go to Installation Settings.
  4. Select Thresholds.
  5. Then select Temperature Correction.
  6. Adjust the temperature reading to fit your needs.

How do I know if my ecobee sensor is working?

1) Gently pull the plastic tab on the back of the sensor. 2) Look for a message on your ecobee’s screen. The 4-digit ID should match the 4-digit code on the back of your sensor. Tap Pair now to confirm pairing.

How low can you set an Ecobee thermostat?

2?F/1.1?C
The lowest possible range in Auto mode the ecobee can maintain is 2?F/1.1?C. This setting prevents your equipment from short cycling.

Where is the thermostat registration code?

To Show the Registration Code

  1. Press Menu on the main screen of your thermostat.
  2. Go to Registration. If 2 steps left is displayed beneath Registration, you need to connect your thermostat to WiFi first.
  3. The thermostat will show you a registration code that you need to enter into the mobile app or web portal.
See also  Can You Make A Phone Call On An Ipad?

How do I reset my ecobee without access code?

How do I reset my ecobee password?

  1. Navigate to the login page on your mobile device, or web browser.
  2. Select “Forgot password?” and enter the email address associated with your ecobee account.
  3. You should receive an email with a link to reset your password.
  4. Once you complete, you will receive a final confirmation email.

How do you reset ecobee for new owner?

To reset your Ecobee:

  1. Make sure the Ecobee is turned on and properly connected to power.
  2. On your thermostat, navigate to the icon for the Main Menu.
  3. From the Main Menu, select the option for Settings.
  4. Under settings, there will be a choice for Reset.
  5. When you get here, select Reset Registration.

Where should I put my ecobee sensor?

ecobee recommends placing the sensors about 5 feet high for optimal temperature measurement. For optimal motion detection, sensors should be aimed at doorways and seating areas.

Why is my ecobee thermostat not working?

Open the panel on your furnace to expose the control panel where your thermostat wires are connected. Most systems have a purple 3 or an orange 5 amp fuse on the board—check this fuse to ensure that it’s intact. A blown fuse will have to be replaced. Once a blown fuse is replaced, the ecobee should power back on.

Where is ecobee HomeKit code?

Your Apple HomeKit Code can be found on the back of your ecobee Switch+ wall plate and on the back of the Switch+ installation manual.

How do I connect ecobee to home assistant?

You can do this by logging in, selecting My Apps from the hamburger menu, clicking Add Application on the left, entering the PIN code from Home Assistant, clicking Validate and then Add Application in the bottom right. After authorizing the app with ecobee, return to Home Assistant and click Submit.

See also  Will Nest Smoke Detector Work Without Wifi?

How do I install ecobee app?

How to Install the ecobee App

  1. Open Google Play.
  2. Select the search bar at the top.
  3. Type in ecobee, then select the app from the list.
  4. Select Install.
  5. Select Open to launch the app.

What devices work with ecobee?

ecobee can be controlled from iOS and Android devices.
We are also compatible with smart home integrations, such as:

  • IFTTT.
  • Apple HomeKit.
  • Samsung SmartThings.
  • Amazon Echo.
  • Control4.
  • Keen Smart Vents.
  • Wink.

What apps work with ecobee?

the Wink app
You can control your ecobee3 lite using the Wink app on your mobile device or through the ecobee web portal. Adjust the temperature, set your schedule, even check in on rooms if you’ve got room sensors set up.

Contents

This entry was posted in Smart Home by Ruben Horton. Bookmark the permalink.
Avatar photo

About Ruben Horton

Ruben Horton is a lover of smart devices. He always has the latest and greatest technology, and he loves to try out new gadgets. Whether it's a new phone or a new piece of software, Ruben is always on the forefront of the latest trends. He loves to stay up-to-date on the latest news and developments in the tech world, and he's always looking for ways to improve his own knowledge and skills.