As part of the default onboarding process, Home Assistant can detect your location from IP address geolocation. Home Assistant will automatically select a temperature unit and time zone based on this location. You may adjust this during onboarding, or afterwards at Configuration -> General.
How do I set Home Assistant location?
Android users can find custom sensor settings for location tracking under App Configuration > Manage Sensors > Location Sensors. The settings allow you to adjust the minimum required accuracy for the location to be reported to Home Assistant.
How do I change Home Assistant configuration?
Editing configuration via Samba/Windows Networking
Go to the add-on store and look for Samba in the core section. After you have installed the add-on, click on START. Home Assistant should now be available in the networking tab on your computer. We suggest that to edit configuration.
What is Home Assistant address?
Just within your home network you might know that your Home Assistant is on an IP like 192.168. 1.4 and listening on port 8123. If you use Home Assistant OS and haven’t changed any of the defaults, Home Assistant will also be reachable at http://homeassistant.local:8123.
How do I connect to my Home Assistant?
Configuration
- Browse to your Home Assistant instance.
- In the sidebar click on Configuration.
- From the configuration menu select: Integrations.
- In the bottom right, click on the Add Integration button.
- From the list, search and select Home Connect.
- Follow the instruction on screen to complete the set up.
What is Home Assistant Hacs?
HACS is an abbreviation of Home Assistant Community Store. Although Store is not technically correct since nothing is sold, it’s more like a marketplace? but HACM didn’t have the same ring to it. HACS is a component that gives the user a powerful UI to handle downloads of custom needs.
How do I turn on Advanced Mode Home Assistant?
Activate Advanced Mode
Go to the Profile tab in Home Assistant and scroll down to turn on Advanced Mode. Advanced mode will give you the ability to use the Check Configuration tool.
How do you customize entities in Home Assistant?
You can use the UI to change the entity_id and friendly name of supported entities. To do this: Select the entity, either from the frontend or by clicking the info button next to the entity in the Developer Tools States tab. Click on the cog in the right corner of the entity’s dialog.
How do I change my Home Assistant IP address?
Open Up your Home Assistant console. Click Supervisor from the left, select system from the top right. Find the IP address and click change.
What are Home Assistant entities?
turn_on is the turn_on service for the homeassistant domain. An entity is the representation of a function of a single device, unit, or web service. There may be multiple entities for a single device, unit, or web service, or there may be only one. An event is when something happens.
Is it safe to expose Home Assistant to the internet?
A problem with making a port accessible is that some Internet Service Providers only offer dynamic IPs.Just putting a port up is not secure. You should definitely consider encrypting your traffic if you are accessing your Home Assistant installation remotely.
How long does Hacs take to setup?
Which in return will cause the initial startup of HACS to take over 1 hour to finish.
How do you get rid of Hacs?
Revoke OAuth access
- Find HACS in the list of apps, click on the 3 dots to the right of HACS.
- Select “Revoke”
What is configuration Yaml?
What is configuration. yaml? The configuration. yaml file is the main YAML file used by Home Assistant to gather all of the information about the users desired configuration. It is like one big settings page, only the options are stored in a written list rather than by a bunch of switches and check boxes.
How do I backup my Home Assistant?
Backing Up Home Assistant
- Go to Supervisor (formerly Hassio).
- Click on the Snapshots tab.
- Name your Snapshot (optional).
- Choose between a Full Snapshot or Partial.
- Check Password protection (optional).
- If you selected Password protection, set a password.
- Click Create.
How do you add a switch to Lovelace?
To add the Button card to your user interface, click the Lovelace menu (three dots at the top right of the screen) and then Edit Dashboard. Click the Add Card button in the bottom right corner and select Button from the card picker.
What is a Lovelace card?
Lovelace is the Home Assistant dashboard. It is a fast, customizable and powerful way for users to manage their home using their mobiles and desktops. 29 different cards to place and configure as you like.Fast: Using a static configuration allows us to build up the dashboard once.
How do I change my Home Assistant logo?
Method 1/2 Integration
- Go to your Home Assistant configuration and to Integrations.
- Add a “Favicon” integration.
- Enter your wanted title and the path to your icons. E.g. Icon path: /local/favicons/
- Press submit.
- Refresh the page. Make sure to clear the cache of your browser to get the new icons.
What is Netmasking?
Netmasks (or subnet masks) are a shorthand for referring to ranges of consecutive IP addresses in the Internet Protocol. They used for defining networking rules in e.g. routers and firewalls. Every entity (server or client) communicating on the internet will have a unique Internet Protocol (IP) address.
How do you use Duckdns at Home Assistant?
Go to www.duckdns.org and logon using your preferred credential method. Once you logged on, add a domain and take note the token information. We will be using this token to configure the DuckDNS in Home Assistant. Also take note the domain information you created (e.g., https://myhomeassistant.duckdns.org).
Where are entities stored home assistant?
The default, and recommended, database engine is SQLite which does not require any configuration. The database is stored in your Home Assistant configuration directory (‘/config/’) and is named home-assistant_v2. db .
Contents