How Do I Reset My Yale Wifi Bridge?

Reset the Yale Connect Wi-Fi Bridge. Leave the Connect plugged into the wall and hold down the round reset button on the front of the device for 5 seconds, then let go. The Yale Connect Wi-Fi Bridge will need to be configured in the app following a hard reset. Go through the in-app setup flow again to reconfigure.

How do I reset my Yale Bridge?

If you’ve checked your connection and the Internet is working, try the following to reboot your Yale Connect Bridge:

  1. Unplug the device from the outlet.
  2. Plug the Connect back into the outlet.
  3. Hold the reset button for 5 seconds, and release.

How do I reset my Yale WiFi?

Open the Yale Access App and go to House Settings. Select the Yale Connect Bridge Settings menu. Scroll to Factory Reset. Select Reset Connect.

How do I connect my Yale lock to a new WiFi?

In the Yale Access app, go to the side menu (upper left), tap Set Up New Device. Choose Set Up A Connect. Choose a lock with which to associate your Yale Connect Wi-Fi Bridge. When prompted, plug connect into an outlet near your door and then follow the in-app instructions.

Why is my Yale Offline?

Your Google Nest ? Yale connects to the internet through a Google Nest Connect or Google Nest Guard in your home.If your lock can’t reach Guard or Connect, it will appear as “Offline” on the Nest app. Even if your lock is offline, most passcodes will still work.

How do I get my Yale lock back online?

Your lock doesn’t connect directly to Wi-Fi. Instead, it uses a Google Nest Connect or Google Nest Guard for its internet connection. So you’ll only need to update the Wi-Fi information on your Connect or Guard in order to get your lock back online.

See also  Can You Add Firestick To Homekit?

What is Yale link bridge?

Yale Link Bridge is an active device use to pair with Smart Door Locks that have Yale Link Module installed to enable the remote capabilities of the Smart Door Locks. Users can Lock and Unlock the Smart Door Locks remotely.• Users can check the Entrance History of the Smart Door Locks.

How do I reset my Yale combination lock?

To reset the combination: Step 1 Position the dials to the preset combination 0-0-0 and pull out the shackle. Step 2 Turn the shackle counterclockwise 90 and press down all the way. Step 4 Release the shackle and return it to its original position.

How do I reset my WIFI camera to factory settings?

How to reset IP Camera to factory defaults

  1. Keep the device powered on for at least 30 seconds to complete its normal startup.
  2. Find something like a pin to press the Reset button on the camera and hold it for 15 seconds to restore the settings to factory defaults.

How do I reset my Smart camera WIFI?

Press and hold the Reset button located on the back side of the camera for 15 seconds, and then release the button. The camera will make a “click” sound and then the status LED will blink green, indicating the camera was reset.

How do I setup a wireless bridge?

Place the wireless bridge within range of your wireless router’s signal, and also within a cable’s length of your wired devices. If your router supports Wi-Fi Protected Setup, or WPS, setup is easy. Simply press the WPS buttons on your bridge and router to link them wirelessly.

See also  Can Alexa Tell Me When I Get A Text Message?

How do I set up Yale access?

How to Set up a Device in the Yale Access App

  1. Download the Yale Access App. Download the free Yale Access App on your smartphone and create an account.
  2. Enable Bluetooth.
  3. Set up the Device in the Yale Access App.
  4. Scan the QR Code.
  5. Install Your Assure Lock.
  6. Power Your Assure Lock.
  7. Create Master Entry Code.
  8. Remove the Batteries.

Why is my Smart Hub offline?

One of the reasons why is SmartThings Hub offline is due to a loose wired connection of the device. If the plug is not correctly connected to the power socket, your SmartThings Hub may show as disconnected. You should check that it is connected properly to restore the online connectivity of the SmartThings Hub.

Why is my Yale lock not working?

If you find that the issue is the lock, try rebooting the lock first. To reboot the lock, remove one battery from the lock and replace it. Once you have rebooted the lock, try the entry code again. If this does not work, the keypad must be reset.

How do I connect my Yale link bridge?

In the Yale Access App, go to the side menu (upper left), tap Set Up New Device. Choose Set Up Yale Connect Bridge. Choose a lock with which to associate your Connect. When prompted, plug connect into an outlet near your door and then follow the in-app instructions.

What is Yale connect for?

Yale Connect serves as an online office, allowing you update your organization’s membership and leadership, save your organization’s important documents, and post your events on one, centralized event calendar.

What is Yale smart living?

Yale Smart Living is Yale’s range of home security devices that helps you protect, monitor and control your home, anywhere at any time, via your smartphone or tablet. The range includes Smart Alarms, CCTV Cameras & Kits, IP Cameras and Smart Door Locks.

See also  Is Alexa Compatible With Z-Wave?

How do I reset my Yale lock without a master code?

I’ve forgotten or need to change my Primary Code

  1. Locate the black battery cover at the top of the inside door handle.
  2. Remove the battery cover.
  3. Then remove the rear cover.
  4. Now remove the cable.
  5. Press both the I and P buttons at the same time and then place the batteries back in.

How do I reset my IP address for my IP Camera?

How do I change the LAN IP address of my camera?

  1. Step 1: Open a web browser and enter the IP address of the camera in the address bar (default is 192.168.
  2. Step 2: The default username is admin and the password field should be left blank.
  3. Step 3: Click on Setup on the top menu bar.

How do I reset my Yale CCTV camera?

How do I reset my system?

  1. Turn off the power of DVR.
  2. Press and hold the reset button. (see image)
  3. Turn on the power of DVR & after 10 seconds release the reset button.
  4. The DVR will now be in default settings.

How do I fix a network bridge error?

Double-click Network Connections. Right-click Network Bridge, and then click Properties. Click the General tab. On the Select the adapters you want to use to connect to computers on your local network list, click to clear the check boxes for the network adapters that are installed on your computer, and then click OK.

Contents

This entry was posted in Smart Lock by Alyssa Stevenson. Bookmark the permalink.
Avatar photo

About Alyssa Stevenson

Alyssa Stevenson loves smart devices. She is an expert in the field and has spent years researching and developing new ways to make our lives easier. Alyssa has also been a vocal advocate for the responsible use of technology, working to ensure that our devices don't overtake our lives.