Press and hold the Reset button on the back of the hub for 10 seconds. This will power cycle the hub. Try to connect the hub again.
How do I factory reset my WYZE hub?
Factory reset Wyze Sense Hub.
- In the Wyze app, tap on your hub, then the Settings gear > Delete Device.
- Single-press the reset button on the back of the hub.
- In the app, tap the + plus sign > Add Device > Sensors > Wyze Sense Hub.
- Set up your hub again.
How do I connect my WYZE hub to WiFi?
To do this:
- In the Wyze app, tap on your Wyze Base Station.
- Tap on the Settings gear on the top right.
- Tap Device Info > Change Connection. You’ll see one of the following screens: Select your network. Follow the onscreen steps to connect to your WiFi network. Once connected, unplug the Base Station from your router.
How do I reset my WYZE base station?
Reboot your Wyze Base Station to reestablish the connection.
- Unplug the base station from power, wait 5-10 seconds, then plug it back in.
- Once the status light is solid blue, the reboot is complete.
How do you reset the WYZE sense hub?
Press and hold the Reset button on the back of the hub for 10 seconds. This will power cycle the hub. Try to connect the hub again.
Can you reset a WYZE camera?
With the Wyze Cam Pan plugged into power, press and hold the setup button on the bottom of the camera for 10 seconds. This will reset the camera.
Why is WYZE camera not connecting to WiFi?
Forget all WiFi networks, restart your phone/tablet, then reconnect to your 2.4 GHz network. On iOS: In the Settings app, tap General > Reset > Reset Network Settings. On Android: In the Settings app, tap General management or System, tap Reset or Reset Options > Reset Network Settings. Confirm the reset.
How do I reset my WYZE outdoor Cam?
To factory reset your Wyze Cam v3:
With the Wyze Cam plugged into power, press and hold the setup button on the bottom of the camera for 10 seconds. This will reset the camera.
How do I change the WiFi on my WYZE camera?
How to change your WiFi details
- In the Wyze app, tap Home.
- Tap the+ plus sign in the upper left, then select Add Device > Cameras.
- Tap on your camera version.
- Follow the on-screen prompts to set up your camera again.
Does WYZE base have to be plugged into router?
Unlike other Wyze devices, the Wyze Base Station requires a wired connection to your router during setup. You will not be able to set up the Base Station without a router.
What is error code 90 on WYZE?
Error code -90
This error means that your Wyze Cam can’t be reached by the streaming servers. Remove the microSD card if you have one.
How do you power cycle a WYZE?
To power cycle your camera:
This can be done either from the power outlet, or from the camera itself. Allow 5-10 seconds to pass for the camera to completely discharge. Plug the camera back into the power source and allow it reinitialize.
How do I get my WYZE back online?
Reboot your Wyze Base Station to reestablish the connection.
- Unplug the base station from power, wait 5-10 seconds, then plug it back in.
- Once the status light is solid blue, the reboot is complete.
Why do my WYZE bulbs keep going offline?
Check that the bulb is plugged in and turned on at the light socket or physical switch. The bulb requires a constant power source to stay connected. If connected to a dimmer switch, make sure the dimmer switch is set to maximum to ensure the bulb is getting the power it needs.
How do I get my WYZE sensor back online?
Do this by taping the On/Off button to the right of the camera’s listing on the Home tab. If the sensor still shows as offline, remove the Bridge from the camera and Power Cycle the camera by unplugging the USB power cord, waiting 5 seconds, and then plugging the Bridge back in.
How do you Unbrick a WYZE camera?
Hold the setup button, plug in your USB cable, and keep holding the setup button for 12-15 seconds, then release the button. Wait for 3-4 minutes. The camera will reboot and change light status during this time.
Can you factory reset a blink camera?
To reset the module, you will press and hold the reset button on the device’s sidenext to the USB portuntil the light turns red. This may take 15-30 seconds. You will know that the reset was successful when you see one solid green light and one flashing blue light.
How do I connect to 2.4 GHz WiFi?
To connect your Android device to a 2.4 GHz network:
- Unlock your device and tap the Settings app.
- Tap Network & Internet > Wi-Fi.
- Enable WiFi by tapping Use WiFi at the top.
- Select a 2.4 GHz WiFi network.
- If prompted, enter the password for the network.
How do I know if my network is 2.4 or 5?
- Connect to the WiFi network.
- Open your networks panel from your taskbar (click the WiFi icon in the bottom right).
- Click on Properties of your WiFi network.
- In the new window that opens, scroll all the way down to Properties.
- Network Band will either say 2.4GHz or 5GHz.
Why is WYZE camera flashing?
Make sure it’s properly connected to power.
Status Light Guide Detailed.
Status light state: | What does the light mean? |
---|---|
Flashing red and blue lights | Camera is trying to connect to WiFi Scanning QR code Upgrading with a microSD card Or, possible error state: Network disconnected |
Why is my WYZE camera blinking red?
Flashing Red, Red and Blue, or Blue
Power cycle the camera by unplugging the power and plugging it back in. If the camera returns to flashing red but never reconnects, set the camera up as a new device.
Contents