Factory Reset 2 Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red. 3 Press the Program button once more. The LED will flash green and red, and the auto-handing process will begin.
How do I change the code on my Weiser aura lock?
To add user codes to your Aura lock, download the Weiser App on your smartphone, create an account, create a ‘home’, and add the Aura lock to your ‘home’ within Bluetooth range of the lock.
What is Weiser home connect?
Weiser’s Home Connect Technology enables your Weiser door lock to wirelessly communicate with other devices in your home. Imagine locking your door from your cell phone or receiving a text message letting you know your child just got home from school. Home Connect Technology has the power to make it happen.
How do I factory reset my Kwikset Smart Lock?
1 Factory Reset
- Open your door.
- Extend the latch bolt.
- Slide up the cover to open the back of your lock, exposing the buttons beneath.
- Push and hold the reset button for 10 seconds, until the lock beeps.
- The light ring will flash red, then spin amber.
- The lock has now been restored and is ready to be set up again.
Does the Kwikset aura lock automatically?
Auto-lock is an optional re-locking feature where the Aura deadbolt re-locks itself after a period of time. Click here to view instructions on changing lock settings.
How do I sync my Weiser Smart lock?
When prompted by your smart home system to initiate pairing at the lock, press button A on the lock interior four times. If the pairing process is successful, re-name the lock in your system (if applicable). If the pairing process is unsuccessful, press button B nine times. Perform steps 6A-6C again.
How do I reset my home connect lock?
Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red. Press the Program button once more. When the LED flashes green and you hear one beep, the lock has been reset.
Why does my Weiser lock keep beeping?
The lock should beep twice when it unlocks and once when it locks. It will also beep if there is a warning such as a low battery or a jammed bolt. To turn the beeping sound off:Reinstall the battery cover.
Why is my Kwikset lock not pairing?
My Lock Won’t Pair
Remove the battery pack. Press and hold the A or Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the Lock beeps and the status LED flashes red. See the Installation and Programming Guides section for button locations for your Lock model.
Does Kwikset aura work with SmartThings?
All Kwikset SmartCode smart locks compatible with SmartThings and Wink: Can be programmed with up to 30 user codes. Feature one-touch locking for added convenience.
Can more than one person have the Kwikset app?
Yes, if the user has a compatible Apple device with correct iOS installed, they can be invited to share the control of the lock via Premis app.
What is the master code for Kwikset lock?
0-0-0-0
The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.
How do I delete the code on my Kwikset lock?
Delete A User Code:
- Make sure the door is open.
- If you have not enabled a programming code, press and release the program button. You will hear two beeps.
- Press 2 to delete a user code.
- Press Kwikset.
- Enter the user code you wish to delete.
- Enter the user code again.
- Press Kwikset.
How do I reset my halo band?
Factory Reset Your Halo Band
- Unpair the Halo Band from your phone’s Bluetooth settings:
- Open the Amazon Halo app .
- Select Settings .
- Under Device select Halo Band.
- Select Deregister Band.
- Double press the button on your device.
- Open the Amazon Halo app, log in, and follow the in-app instructions to complete setup.
Why is my Kwikset lock blinking orange?
What Do The Different Colored Lights On The Status LED Mean for my Premis Lock? Amber flashes mean it is locked, while green flashes mean it is unlocked, and red means low battery.
Does Kwikset aura work with Alexa?
Aura does not currently work with Alexa or Google Home but we are always looking at ways to innovate and deliver valuable features and benefits.
Is Kwikset aura Zwave?
The Wi-Fi-powered Halo lock skips past traditional low-power wireless standards like Z-Wave, Bluetooth LE or Zigbee.The Bluetooth-only Aura lock has no bridging element and only lets you control it from an app when you’re in Bluetooth range.
Can you rekey a Weiser Smart Lock?
Re-key your locks any time you feel you might have misplaced a key or allowed a stranger to borrow your key. Weiser SmartKey Re-key technology makes re-keying fast and convenient, without having to replace the entire lock.
Can I copy a Weiser smart key?
They are awesome. You can have your keys replicated anywhere. Not sure what the challenge is. I have Weiser smartkeys and have had duplicate keys made at Home Depot, at the kiosks at Canadian Tire, other places.
Why is my Weiser lock not working?
Press and hold the program button while reinserting the battery pack. Hold the program button for 30 seconds until the status LED flashes red. Press the program button again. The lock has been reset when the LED flashes green.
Contents