Restart the Smart Drive Unplug the Smart Drive for 30 seconds, then plug it back in. Wait a few minutes to see if the connection has been re-established.
How do I fix vivint smart drive?
Make sure your app is up to date by unistalling and re-downloading. If that does not resolve your issue, try power cycling your Smart Drive and internet router. Unplug both devices for 30 seconds, then plug them back in and wait a few minutes. Turn Playback off in your app and then back on.
How do I access my vivint smart drive?
Smart Home App – Connect Smart Drive
- Press the Menu icon.
- Select Settings.
- Scroll down and press Connect next to the Vivint Smart Drive.
- Enter the H/W ID listed on the bottom of the Smart Drive, then press Done on the keyboard. The device will take a few moments to set up.
- Turn on Playback.
Why is my vivint smart drive blinking red?
Fast Blinking Red: Network cable disconnected; check your device’s network cable. If it is connected, unplug the device for 30 seconds, plug it back in and wait for it to boot up.Solid Red: Internal error. Unplug the device for 30 seconds, plug it back in and wait for it to boot up.
How do you play Vivint again?
On the home screen, tap on the Cameras icon in the lower toolbar. Press the play button on the desired camera. Press the rewind button.
What do the SmartDrive lights mean?
A sensor bar for SmartDrive’s SR4 platform has indicator lights that fleets can use to alert drivers to risky behaviors.For these and other types of risky behaviors, SmartDrive has customers who opt to give drivers real-time feedback using green, yellow and red-light notifications on the camera.
How does vivint Smart Drive work?
The Vivint Smart Drive stores every minute of footage from your indoor, outdoor, and doorbell camera for 30 days.Since Vivint cameras feature night vision and capture sharp audio, watching your recordings gives you a clear idea of what’s happening in and around your home, day and night.
Why is my Vivint panel offline?
Several issues can cause your panel to lose the connection to your home WiFi network. A passing storm may have knocked your power and network offline. An Internet outage in the area could have caused the WiFi to go out.Find out how to test your WiFi to determine if you should contact Vivint or your ISP.
Why does my Vivint camera keep going offline?
Your Vivint cameras are also dependent on your home wifi speeds. We recommend at least 2 MBPS of upload speed per camera. If your internet is inconsistent or drops off, your cameras may also drop off as a result. To learn how to check your panel connection to wifi, see SkyControl 3.0 – Connect to WiFi.
What does red light on vivint camera mean?
The Vivint Indoor Camera was previously known as the Ping Camera. White: Connected/normal operation No Light: Privacy mode enabled or no power Green: Ready to connect Yellow: Rebooting Red: Not connected to the panel Breathing White: Connected to the panel, but not connected to the internet.
How do I access my vivint DVR?
Tap the camera icon in the menu bar of your Vivint Smart Home app. Tap the settings gear icon in the upper right corner. Select the camera you want to enable Playback for. Tap Recording.
How do I reset my vivint doorbell?
Press and hold the doorbell button until the light turns yellow. The camera will also say, “Release now to reboot”. Once you hear this, release the button.
How do you charge a smart drive?
To charge the drive unit, it must be plugged into a mains power outlet via the SmartDrive charging cable for approximately 3hrs for a full charge. There are LEDs on the charge box that indicate power/charging/fully charged. When the drive unit is on, 4 blue lights means fully charged.
How much is vivint smart drive?
How Much Does the Vivint Smart Drive Cost? You can purchase the Vivint Smart Drive for $249.99. Please note that this device comes part of Vivint’s Smart Home Service Plan, which also provides access to professional monitoring.
Can you view vivint on computer?
Yes, Vivint allows you to control the home automation and home security features from your computer. You can easily look at the system status, check live video feeds, control smart home devices, and arm and disarm the security system remotely.
How do I log into vivint app?
Go to your device’s app store and search for Vivint Classic. Click the download button. When the download is complete, open the app and login to your system using the same credentials you use on Vivint.com.
What does the blue light on smart drive mean?
The drive is being identified by a host application. Flashing blue. The drive carrier firmware is being updated or requires an update.
Does smart drive record all the time?
SmartDrive Extended Recording, with unrivaled video recording capability, helps you capture and store an uninterrupted and comprehensive picture of events that happen to your fleet vehicles and drivers – whenever and wherever they occur. Up to 200 hours of continuous recording.
How do I connect my vivint camera to WIFI?
Add Camera Using the WPS Button
- Go to your router then locate and press the WPS button.
- Go to your camera then locate and press the WPS button.
- Go to www.alarm.com, and click Login.
- Click Video then Settings.
- Click Add Video Device.
- The camera will be displayed on the screen to select from.
How do you set up space monkey?
Plug your Space Monkey into a surge protected power outlet and your wireless internet router with the included cables. Download the Space Monkey App from your iOS or Android app store to connect your Space Monkey Device to your smart phone. You can now backup and share all your photos and les. You’re Ready!
How can I see my vivint footage?
Smart Home App | View Live and Recorded Video
- Tap the camera icon from the menu bar.
- Tap the thumbnail of the camera you would like to view to start the live feed. Tap Done to go back to the main camera screen.
- If you want to view recorded clips tap All clips at the bottom of the page.
Contents