Unplug the Smart Drive for 30 seconds, then plug it back in. Wait a few minutes to see if the connection has been re-established.
https://www.youtube.com/watch?v=CeXhoQE9ii4
How do I reboot my Vivint panel?
Reboot your panel
Tap Displays, then tap on the panel you want to reboot. Tap Reboot, and then Yes to confirm.
How do you delete all videos on vivint?
Delete your camera
Tap Cameras. Tap on the camera you want to delete. At the bottom on the page, Tap Delete camera, and then Yes to confirm.
Why is my vivint not working?
Log out of your mobile app and log back in.If your connection is good, but it isn’t working, delete and reinstall your app. If neither the app nor the account center is working, go to your panel and send a command to your door locks, thermostats, or lighting modules directly from the panel.
How do I access my vivint DVR?
Tap the camera icon in the menu bar of your Vivint Smart Home app. Tap the settings gear icon in the upper right corner. Select the camera you want to enable Playback for. Tap Recording.
How do I reset my vivint Sky Control Panel?
Line up the BOTTOM of the panel to the backplate and snap it back in place. Replace the top screw and plug the panel back into the wall. After 10-15 minutes, the panel should finish powering on.
Does vivint panel reboot on its own?
Vivint’s control panel doesn’t require a manual resetting if the power failure lasts for more than twenty-four hours. Your settings will automatically reboot and reconnect to your smart devices.
How do I delete Vivint history?
Go! Control – Clear Alarms
- From the home screen of your Go! Control, tap Security.
- A red icon will appear. Tap on the icon to view the alert.
- Your alarm notifications will appear. Tap on the message that you would like to read.
- Select the Clear Alarm History box to clear the alarms. Tap OK to exit the alarm screen.
How do I delete Vivint activity log?
Activity events cannot be edited or deleted, and they can be viewed as far back as property activity began.
How long does Vivint keep recordings?
for 30 days
The Vivint Smart Drive stores every minute of footage from your indoor, outdoor, and doorbell camera for 30 days. Review recordings from up to four of your video cameras right from the Vivint app or Smart Hub with security DVR.
How do you play vivint again?
On the home screen, tap on the Cameras icon in the lower toolbar. Press the play button on the desired camera. Press the rewind button.
How do I reset my vivint smartdrive?
Restart the Smart Drive
Unplug the Smart Drive for 30 seconds, then plug it back in. Wait a few minutes to see if the connection has been re-established.
How do I update my sky vivint panel?
From the Panel
- At your panel, open your menu by pressing the 3 dots in the corner.
- Select General.
- Enter your PIN.
- If your panel is already on the latest update, the option will be grayed and say “Panel is up to date.” If not, it will list the newest firmware option next to Software Update and allow you to select it.
How do I fix Vivint smart drive?
Make sure your app is up to date by unistalling and re-downloading. If that does not resolve your issue, try power cycling your Smart Drive and internet router. Unplug both devices for 30 seconds, then plug them back in and wait a few minutes. Turn Playback off in your app and then back on.
What is AirBridge Vivint?
The Vivint AirBridge is a Vivint-secured mesh Wi-Fi solution, intended to improve panel and camera connectivity for Smart Hub customers (not SkyControl or Go! Control compatible). Let’s get it set up and integrated into your system right away.
What is privacy mode on Vivint?
Privacy mode allows you to temporarily disable your Vivint fixed camera’s remote viewing and recording capabilities. While in Privacy mode, your fixed camera will display a blue screen on your online account.
What does reboot panel mean?
A system reboot means that the system powers down and then powers back on. No changes to the settings are made during this time. This should not be confused with a factory reset, which will default settings and clear zones. There are many reasons why a person might want to reboot their system.
What is the vivint installer code?
2203 is the default installer code on the Vivint security system.
How do you reset a frozen vivint panel?
Ensure the device remains in this state for at least 30 seconds after which you have to put the battery back inside. Remount the side panel and plug the panel back into your wall. After 2-3 minutes, the panel should start working again.
Why is my Vivint panel gray?
The home screen of your Glance Display will be green if the system is ready to arm, and grey if it’s not ready to arm. The system is not ready to arm when there is a door or window open in the home.
Can I use Vivint app without monitoring?
Yes, you can use Vivint equipment without monitoring. However, you cannot use the app on your phone. You can still arm and disarm the alarm, and have it set up to automate things such as a door lock or thermostat whenever you leave.
Contents