Reset Your Device To reset your Tuya smart plug, turn it on and then press and hold the Power button (for about 5 seconds) until you see a rapidly blinking light. The rapid blinking light indicates the device is reset. You can now start the connection process again.
How do you reset a Tuya smart light switch?
How to reset device?
- Long press reset button for 5 seconds until indicator light flashes, representing successful reset;
- Indicator light quickly flashes (2 times per second), representing quick connect mode;
- Indicator light slowly flashes (one time per 3 seconds), representing AP mode;
How do I factory reset my Smart Life switch?
Press to reboot the Smart Switch. Press and hold (about 5 seconds) until the Wi-Fi status LED blinks amber and green alternately to initiate App-Config mode. Press and hold (about 10 seconds) until the Wi-Fi status LED blinks amber rapidly to factory reset the Smart Switch.
How do I reconnect my Tuya smart light?
- Connect your device to the power source and turn it on.
- Open the App, select “+” on the top right of the home page to add device. At the net-pairing page, select the type of product.
- Make sure the device is in net-pairing status: the Wi-Fi indicator light blinks quickly (twice a second)
How do I put my Tuya switch in pairing mode?
The 3-gang switch: Press 1st power button from the left for 10 seconds to put switch in pairing mode, LED flashes once every two seconds.
How do I reset my Tuya?
To reset your Tuya smart plug, turn it on and then press and hold the Power button (for about 5 seconds) until you see a rapidly blinking light. The rapid blinking light indicates the device is reset. You can now start the connection process again.
How do I reset my Tuya Zigbee gateway?
Press and hold the reset button of the Zigbee gateway for 5 seconds. Until one of the two indicator lights enters a fast flashing state (red light flashes, blue light is always on) Follow the instructions in the App to configure the network.
How do I reset my Smartlife WIFI?
Make sure your mobile device and the Smart Plug are connected to the same Wi-Fi network. Reset the smart plug to factory defaults, then follow the initial setup instructions again. Press and hold for 10 seconds to reset (LED flashes green and the Smart Plug resets upon release).
How do I reset my Tuya Smart LED strip?
press and hold the power button of wifi led controller for 5-6 seconds , then you can reset the light strip controller again.
How do I use Tuya smart app?
Log in with the app account or third-party account
If an account of Tuya Smart has been registered, tap Log In to go to the login page. The State/Region field value is automatically specified and can also be manually changed. Enter the registered mobile phone number or email address and the password and tap Log In.
How do I pair my Tuya smart diffuser?
How Add Aroma Diffuser to Tuya Smart APP?
- Search the Keyword Tuya Smart in App Store / Google Play or scan the QR codes on the package box/ User Manual to download and install APP.
- Register an account and login.
- Add the device to Tuya Smart APP.
- Select Wi-Fi network and Enter Wi-Fi password.
How do you reset a curtain switch?
Pair and clear up the RF code
Press the switch button for 6 times,and hold on the 6th time,then release until the blue indicator on the switch flashes fast. Pair/Reset is successful.
How do I connect my Tuya smart to WIFI?
Download & register an account on the Smart Life or Tuya App. Open app then select +. Now follow the instructions on the app. Enter your WIFI credentials to connect to your home network.
How do I reset my Tuya ZigBee switch?
Devices with a reset button: Firstly, make sure the device is powered off for more than 10 seconds before powering on the device. Then long press the reset button on the device for about 5 seconds (for switch devices, the reset button is mostly the switch Button itself).
How do you put ZigBee in pairing mode?
Z-Wave / Zigbee Device Pairing Guide
- Click on add device
- Click on Other Devices. This will open the paring screen and the gateway will search for the new device.
- Follow the steps below to complete the pairing of the device with the gateway.
- Click on Add Device.
- Click on Other Devices.
- Power up the Z-Wave device.
How do I reset my Zwave?
1) Press and hold the Aeotec Z-Wave device for 20 seconds, then release to perform a Hard Reset.
How do I reset my Jasco Z-wave light switch?
(Ask hub manufacture for more information on this.) For all our Z-wave plus in-wall switches you will click the upper switch 3 times rapidly, and the lower switch 3 times rapidly. On our paddle switches the blue LED will flash 5 times to confirm the reset (there is no LED on the toggle switches to confirm the reset).
How do I reset my GE Z-wave outlet?
To remove and reset the device Once the controller is ready to remove your device, press and release the button on the smart outlet to remove it from the network. To return to factory defaults Press the button 3 times, then press and hold the button for at least 3 seconds. The LED will blink 5 times to confirm.
How do I reset BG smart socket?
To reset your BG Smart Socket, press and hold the Power button for about 10 seconds. Release the button when the indicator light blinks rapidlythis shows the socket is reset and now ready to connect to a Wi-Fi network. Also, uninstall and reinstall the app to clear all previous settings.
How do I reconnect to my smart life?
One easy step that you can do to How do I reset my smart life plug? is to press and hold the power button. Then, while keeping the power button, you can plug the smart life plug into the outlet. Then, wait for the click and the LED light.
How do I change the Wi-Fi on my smart plug?
Unfortunately, there is no straightforward way to change the Wi-Fi on a Kasa smart plug from within the app. To change the Wi-Fi, you’ll need to perform a factory reset on the device and then set it up again as if it were a brand new device.
Contents