How Do I Reset My Sunsetter Motor?

Press and hold the “Programming” button on the back of the remote a second time until the awning moves back and forth in short movements. The remote control is now reset and ready for normal use.

How does a retractable awning motor work?

The motor connects to a toggle switch, which you then flip to extend or retract the awning. When flipped to open, the switch will trigger the motor to wind the barrel. The barrel then extends the awning fabric, stretching it out over the metal arms.

How long do Sunsetter awnings last?

Generally speaking, they will last from 5-15 years. They may be warranted for 5 years from the manufacturer, depending on which fabric you choose to use. With proper cleaning and maintenance, your shade feature should last for a very long time. Our aluminum frames are guaranteed to last for a lifetime.

How do I reset Somfy motor limits?

Press and hold the MY button until the motor jogs. Check the new limit. To change the lower limit, run the motor to its lower limit and let it stop. Press the UP and DOWN buttons simultaneously until the motor jogs.

How do you adjust a Sunsetter?

How to Adjust Height on a Sunsetter Awning

1. Open your awning fully.
2. Unplug the power cord from the outlet if you have a motorized model.
3. Expose the Allen screws.
4. Adjust the height of the Sunsetter awning.
5. Do another visual inspection.
6. Plug-in the power cord back into the outlet.

How do you adjust the tension on a retractable awning?

Adjusting the Awning
Fully unroll the awning and then slide the upper arm into position. While standing in front of the awning, pull the awning tube downward and toward yourself. With your free hand tighten the knob on the upper tensioning arm. Repeat this step with the other tensioning arm.

How do you fix a sagging retractable awning?

It’s easy to fix a sagging awning — just crank the handle in reverse until the fabric tightens and be mindful of how the material is rolling. For the best results, make sure the cloth rotates over the top of the roller tube rather than spooling underneath it.

Where is the motor on a retractable awning?

roller tube
The motor on a retractable deck awning is invisible. It’s located in the roller tube and can be placed on either the right or left side (looking back at the house).

How does the SunSetter retractable awning work?

All one needs to do in order to operate their motorized retractable awning is push a button. This button triggers the motor to spin quietly as it works to either retract or extend your awning.Awning name brands such as Sunsetter, SunSetter Platinum and Sunesta all offer a motorized option for easy, convenient use.

How much does it cost to replace a SunSetter awning?

A typical SunSetter awning may cost around $1,400 for a manual retractable version or $1,700 for an automatic one. The entire product line ranges from around $800 to $2,500. SunSetter does not install their own products but works directly with local certified dealers to help homeowners.

What is the average cost of a SunSetter awning?

The cost of SunSetter retractable awnings ranges from $800 to $2,500. SunSetter is one of the most well-known and recognizable brands in retractable awnings.

How do you reset power rise blinds?

Press and hold the manual button for about 12 seconds. The shade will jog (move slightly) once at six seconds and again at twelve seconds. Let go of the manual button after the second jog. The shade is now reset.

How do I reset my Sunsetter awning remote?

Press and hold the “Programming” button on the back of the remote a second time until the awning moves back and forth in short movements. The remote control is now reset and ready for normal use.

How do I set Somfy motor limits?

You may adjust by pressing the up or down arrows. To set the lower limit or stop point, press the “my” and up buttons simultaneously. Be sure to press the “my” button slightly before pressing the up button, this will send the shade to the desired upper limit that has been previously programmed.

Why is my Somfy remote blinking red?

Once you plug-in the device and switch it on the myLink will blink red. Open the myLink app and press Start New System. Follow the prompts for setup as they appear on screen. The solid red LED light is an indicator that the myLink is in setup mode.

Can you adjust the angle of a SunSetter awning?

Your SunSetter Awning, once installed, has the ability to be opened partially or to its full projection to suit your deck or patio design. The pitch of your awning may be easily adjusted, up or down, from the factory setting based upon your actual mounting height.

Why is my awning sagging?

Over time, most awnings will start to sag due to age and the weight of water on the awning.However, if you have extended the awning as much as possible and the fabric still sags, you may need to purchase a stabilizer for the awning to keep it from sagging.

How many turns on a RV awning spring?

Generally, it will take six turns for awning lengths of 8 to 12 feet, seven turns for 13 to 14 feet, eight turns for 15 to 16 feet, 10 turns for 17 to 18 feet, 11 turns for 19 to 21 feet, and 12 turns for 22 to 25 feet. This, however, will still depend on the model of the RV awning that you own.

Why will my awning not retract?

Another reason your awning is not retracting well could be the screws on the awning chord. You also need to check the awning chord that is placed along with the screws on the awning rail.If you are experiencing retraction issues, then it is possible that the screws have come loose.

How do I stop water pooling on my caravan awning?

There are two main tips you can employ to keep water from pooling in your awning.

1. Adjust the Support. Sometimes to save money, you just have to “DIY.” Placing a beach ball underneath the pooling area helps raise the low spot and even the fabric out.
2. Invest in a high-quality replacement awning.

How are retractable awnings powered?

Manual retractable awnings require a person to turn a crank or handle to open and close the awning. Motorized retractable awnings automatically unfurl and roll up with the help of an electric motor, and the homeowner only needs to press a button on a control panel or remote control to operate the motor.