To reset the smart switch/plug to factory defaults: Press and hold the reset button until the Wi-Fi LED blinks amber rapidly (about 10 seconds) to reset the Smart switch to factory defaults.
How do you reset the Wi-Fi on a smart light switch?
Press and hold (about 5 seconds) until the Wi-Fi status LED blinks amber and green alternately to initiate App-Config mode. Press and hold (about 10 seconds) until the Wi-Fi status LED blinks green rapidly to factory reset the Smart Switch.
How do I reconnect my smart switch to Wi-Fi?
Use the App to Reconnect to Wi-Fi
After the switch is in discovery mode, open the companion app on your mobile device. Using the app will allow you to select your model and start the pairing process. The app should ask to connect to your Wi-Fi. Enter your credentials, and the switch should reconnect.
How do I reset my TP Link smart switch?
To restart your TP-Link switch, press the restart button just once. To reset your switch, press and hold the reset button for five seconds. The WiFi light will begin to blink amber and green. This means your smart switch has been successfully reset and is now ready for use.
How do I factory reset my GE smart switch?
1 Reset Smart Switch
Press and hold your switch’s button, toggle, or paddle for 10 seconds. If the reset is successful, the indicator light will begin blinking blue meaning the switch is ready to be set up again.
Why is my Smart Switch not connecting to WiFi?
Go to their Settings > WiFi and turn it on. Preferably, you should connect both the devices to the same WiFi network. You can also turn on the WiFi feature from the notification tab as well. If it still won’t work, then restart your devices and try connecting them again.
How do I connect to 2.4 GHz WiFi?
To connect your Android device to a 2.4 GHz network:
- Unlock your device and tap the Settings app.
- Tap Network & Internet > Wi-Fi.
- Enable WiFi by tapping Use WiFi at the top.
- Select a 2.4 GHz WiFi network.
- If prompted, enter the password for the network.
Why is my smart switch offline?
Smart Life devices go offline due to overloads in your router when your router renews the LAN/WAN IP address, or if there are errors stored in its cache. Solutions to this problem include clearing the cache or using a dedicated 2.4g WiFi router for Smart Life devices.
How do I connect my Smart Life app to my WIFI?
Download & register an account on the Smart Life or Tuya App. Open app then select +. Now follow the instructions on the app. Enter your WIFI credentials to connect to your home network.
How do I connect my smart life to WIFI?
How to Set-up With App:
- Download the “Smart Life” from the App store or Google Play.
- Register/Login to the App using your phone number or email address.
- Long press the On/Off button for 5 seconds until the light is flashing every second.
- Select Add Device or the “+” icon to connect your device to a socket.
How do I connect my tp-link to a new WIFI?
Steps to configure TP-Link Smart Plug via Kasa App.
- Open the Kasa App and login to your cloud account.
- Add your Smart Plug on Kasa APP.
- Follow the instruction on the Kasa app to power on the HS100, wait for the Wi-Fi light blinking orange and green.
- Connect your phone to the Smart Plug Wi-Fi.
How do I reset my TP-Link Router?
With the Router powered on, press and hold the WPS/RESET button (more than 10 seconds) until the SYS LED becomes quick-flash from slow-flash. Then release the button and wait the Router to reboot to its factory default settings.
How do you reset a GE toggle switch?
Reset to factory default
Quickly press ON (up) 3 times then immediately press the OFF (Down) button 3 times. Note: This should only be used in the event your networks primary controller is missing or otherwise inoperable.
How do I setup my GE smart switch?
- Launch the C by GE app on your phone or tablet.
- Tap Add in the top right corner.
- Then tap Add New Devices.
- Select C-Start Switches.
- Tap Get Started.
- Tap Continue when you see that light.
- Select the smart switch from the list. Select Continue to proceed.
- Select your WiFi network from the list and tap Continue.
How do I change my WiFi from 5GHz to 2.4 GHz spectrum?
On the top menu, select Wireless. On the right menu, select your desired network, 2.4GHz or 5GHz. Update the network name (SSID) and password (WPA preshared key). Select Apply.
How do you check if my WiFi is 2.4 or 5?
- From Notification Panel press and hold the WiFi icon until you enter WiFi settings screen.
- Select the network properties (tap the gear icon or menu icon).
- Depending on the Android version check: Read the Frequency setting shows as 2.4 or 5GHz.
How do I change my WiFi frequency?
The frequency band is changed directly on the router:
- Enter the IP address 192.168. 0.1 in your Internet browser.
- Leave the user field empty and use admin as the password.
- Select Wireless from the menu.
- In the 802.11 band selection field, you can select 2.4 GHz or 5 GHz.
- Click on Apply to save the Settings.
How do I restart my Smart Life app?
Reset Button: Long press Reset button for 5 seconds, or disconnect the power to reset the camera. Compatible Networks: Download APP: scan the QR code below to download and install Smart Life. Or search Smart Life in Play Store or App Store to install. follow the instructions.
How do I reset my Smartlight?
Turn the bulb off for 2 seconds, then on for 2 seconds. Repeat three more times. After the fourth cycle, the bulb will flash, indicating that the reset was successful.
Why is my Smart Life app not working?
Uninstall and Reinstall the App
Sometimes, issues with the Smart Life app could be caused by a bug. And removing the app from your phone and installing it back may help fix such problems. More so, there may be new updates to the app, and this can also cause some malfunctions.
Why is my smart life bulb not connecting?
Make sure the bulb is blinking when you try to connect to Wi-Fi. Only then will you be able to connect through the Smart Life application “Add Device”. Turning the power on and off 3 times quickly will reset the device.
Contents