How to Reset My SimpliSafe Base Station
- Unplug your base station.
- Remove the battery cover at the bottom of the device using a screwdriver.
- Remove the battery for 10 to 15 seconds before putting the battery back in.
- Put the cover back on the device.
How do I reconnect my SimpliSafe sensor?
New sensors can be added to our latest SimpliSafe system in one of two ways. If you are adding a single sensor, open the Menu on your keypad (using your Master PIN) and select Devices, then Add device and follow the instructions.
How do I test my SimpliSafe sensor?
Press the Test Button on the top of the Motion Sensor. For an accurate test, leave the room for the sensor you are testing then wait 15 seconds. Re-enter the room and the Base Station will say Motion Sensor”
Why does my SimpliSafe motion sensor keep going off?
Direct sunlight hitting the sensor can trigger a false alarm. Heating vents located in the room. If they are located within the sensor’s field of vision, they may cause false alarms. Pets that are able to get too close to the sensor.
Do SimpliSafe sensors go bad?
Sensors in our latest SimpliSafe system will issue errors when they fail to check in with the Base Station. This issue is generally caused by one of the following: The device was programmed when your system was ordered but was never installed.
Does SimpliSafe work with existing sensors?
No. SimpliSafe makes its own cameras and equipment, so the system only works with other SimpliSafe devices for now.
How do I adjust my SimpliSafe motion sensor?
NOTE: You can turn down the sensitivity of the motion sensor via the switch on the back of the sensor. Simply slide the motion sensor off its bracket, and you will expose a small black switch. Slide it towards the “L” to lower the sensitivity.
Do SimpliSafe motion sensors work in the dark?
Yes, motion sensors work in the dark. The way that a motion sensor detects movement has nothing to do with how light or dark it is in the immediate area. This is true whether it is a passive infrared (PIR) motion sensor or a dual-tech motion sensor that also utilizes microwave detection.
What do you do if your SimpliSafe alarm goes off?
Contact our monitoring center 24/7 at 1 (855) 693-4911
If an Entry-, Motion-, or Glassbreak-triggered alarm is disarmed within 30 seconds of the initial alarm signal, our monitoring service will consider this a false alarm. That means you will not receive a phone call and police will not be sent.
What happens when alarm is triggered SimpliSafe?
SimpliSafe will notify the police in the event of an emergency or if a system alarm is triggered. If the monitoring service can not get ahold of the user, or the user provides the wrong safe word or password, the police will be immediately dispatched to the residence or business.
Can cats trigger SimpliSafe?
SimpliSafe’s Motion Sensors have been designed to avoid false alarms.Pets that are able to get too close to the sensor. Pets under 30 pounds generally don’t trigger Motion Sensors, but if they get close enough to the sensor, smaller dogs or cats may still be able to trigger it.
Can SimpliSafe be hacked?
SimpliSafe: Unlike ADT, hacks aren’t uncommon for the newer security company SimpliSafe. Rather, in 2019 a Youtube account named LockPickingLawyer discovered that they could hack the SimpliSafe security system with a $2 dongle from Amazon when physically near the system.
What does yellow light on SimpliSafe smoke detector mean?
NOTE: A yellow solid light indicates that the Smoke Detector is not attached to the bracket properly, and needs to be adjusted. There should be no solid lights when the Smoke Detector is installed properly.
Is SimpliSafe coming out with outdoor cameras?
SimpliCam is the only camera that SimpliSafe provides till now. The announcement of SimpliSafe outdoor camera was done but there is no report of it coming soon.
Simplicam-A Brief Guide, Specifications and Features.
Features | |
---|---|
Night Vision | Yes |
Resolution of Video | 720p HD |
Two way Audio | Yes |
Compatibility with Smartphone | Yes |
Can SimpliSafe smoke detectors be hardwired?
The best feature of this smoke detector is the wireless connection; Now, you can become tension-free from the complications associated with hardwired alarms and enjoy the wireless connection. This battery-powered smoke alarm lets you interconnect the alarms without rewiring.
Can I use ADT sensors with SimpliSafe?
While there are a few exceptions with third-party hardware, SimpliSafe and ADT devices are not compatible.While neither security system is wholly dependent on Wi-Fi, SimpliSafe is optional, and ADT can use it to communicate with your ADT Command Appthey both rely on entirely different networks.
How many sensors can you add to SimpliSafe?
SimpliSafe Original can have up to 39 sensors. (41 if you include the Keypad and Master Keychain Remote) There are a couple of methods that can be used to add sensors to your system.
Why did my motion sensor go off?
Several factors can accidentally set off your motion sensors, including pets and any other activity from heat sources like vents, windows, stoves, or anything that causes a heat change near your sensor. The easiest way to test if your sensor is faulty is by putting a piece of paper in front of it for three days.
How do I reset my SimpliSafe base station?
How to Reset SimpliSafe Base Station
- Unplug the Base Station from its power source.
- Remove the battery from the device.
- Replace the battery, and re-plug your device back in.
- After a full power cycle, the device should be reset.
If you’re at home during a break-in, pressing the Panic Button instantly triggers your alarm. With professional monitoring, our monitoring center will call and check if you’re okay. If you don’t answer your phone or give the safe word, we will alert the police that you’re in danger.
How do you reset an outdoor motion sensor light?
The best way to reset a motion sensor light is to turn it off and back on again for a period of 30 seconds or longer. A homeowner can also turn the power to it off at the breaker, in order to ensure it has time to reset itself. If that doesn’t work, the sensor itself or the bulb may be to blame.
Contents