How Do I Reset My Ring Doorbell On My Iphone?

Perform a Soft Reset

1. Hold the sleep/wake button at the top right of the device and the home button near the bottom of the device at the same time.
2. Keep holding both until the screen goes black.
3. Wait until the white Apple logo appears.

Can I reset my Ring Doorbell from the app?

So, how do you reset your Ring Doorbell 2? You can either factory reset your device via the Ring app, or you can perform a hard reset by removing the faceplate and holding down the black button in front of the camera for 15 seconds.

How do I reconnect my Ring Doorbell to my phone?

To reset/reconnect Wi-Fi on the Ring Doorbell:

1. Remove the doorbell from its mount.
2. Log into the Ring app and tap the menu icon.
3. Select your doorbell, followed by “Device Health” and “Change Wi-Fi Network.”
4. Press the orange button on the back of your Ring.
5. Use your phone to connect to the Ring.

Why isn’t my Ring working on my phone?

If you still have issues, you may need to reset your Ring app. Do this by deleting the app from your device. Then, go to the Google Play store, find the Ring app and reinstall it. You won’t have to set up your devices again, simply log back in and all of your devices will still be installed.

Why is my Ring not working on my iPhone?

If your iPhone won’t ring, it may be a volume or settings issue that can be easily resolved. You should first try fixes like checking the volume and turning off Do Not Disturb or Silent mode. Consider restarting your phone or having it serviced as a final step to fix your iPhone.

How do I reset Ring Doorbell?

Ring Video Doorbell (1st Generation)

1. Undo the security screws and remove your doorbell from its bracket.
2. Press and hold the orange setup button on the back of the device for 10 seconds.
3. The light on the front of the doorbell will flash for several minutes; when the light turns off the reset is complete.

Where is the reset button on Ring Doorbell?

1. Remove the doorbell’s faceplate then press and hold the reset button on the right side of the camera for 15 seconds.
2. After releasing it, the ring light located on the front will flash a few times indicating the doorbell is restarting.

Why is my Ring Doorbell not connecting?

If you’re using an Android phone and can’t connect to the Ring network, you may need to adjust the Smart Network Switch. If you’re setting up a new Ring device that’s battery-powered, your battery will be partially charged when you receive it because there are legal restrictions on shipping lithium batteries.

How do I reconnect my doorbell?

Unscrew the doorbell button and touch together the two wires fastened to the back; if the contact between the wires makes the bell ring, then the button is broken and should be replaced. Connect up the replacement button the same way the original button was wired.

Why won’t my Ring Doorbell connect?

The three most common causes of this problem are the following: A poor connection between your mobile device and the internet. Slow internet upload and download speeds. A poor connection between your Ring device and your router.

How do I get my ring doorbell to Ring on my iPhone?

Setting up Ring notifications

1. Open the Settings app.
2. Scroll down until you see Ring.
3. From the Ring menu, tap on Notifications.
4. Ring recommends that you have every toggle in Notifications enabled for the best usage. Make sure they’re all toggled on (green).
5. Now, you can choose an alert style.

Can you reboot ring doorbell?

Performing a hard reset
To perform a hard reset, hold down the orange button for 20 seconds. After releasing it, the light on the front will flash a few times indicating that your Ring Doorbell is restarting. It may take a minute to fully complete this process.

How do I connect my iPhone to my ring doorbell?

Grab your Ring Doorbell unit and press the orange button on the back of the device. Then tap on “Continue” in the app. The light around the doorbell will begin spinning. Next, if you’re on iPhone, you’ll need to open up the Settings app, tap on “Wi-Fi”, and connect to “Ring-xxxxxx”.

Why can’t I hear my Ring Doorbell on my phone?

If you can hear audio from your Ring Doorbell on your phone, but no sound is traveling from your phone to the Ring Doorbell, it is possible that the Ring app does not have access to your microphone. Follow the steps below for iOS (Apple) or Android to enable notifications.

How do I reset my outdoor ring camera?

Ring Spotlight Cam Battery

1. Find the setup button on the top of the camera.
2. Press and hold the setup button for 10 seconds.
3. The light on the front of the camera will flash for several minutes; when the light turns off the reset is complete.

How do you reset the ring doorbell without the app?

Ring Doorbell: How to Hard Reset

1. Locate the orange button located physically on the back of the doorbell.
2. Press and hold the orange button for more than 15 seconds.
3. Release the button after 15 seconds.
4. Let the device complete the reset for about 5 minutes, and the hard reset should be completed.

Where is the Setup button on ring doorbell?

In order to put the device into Setup Mode, press and release the small button on the right side of the doorbell. What is Setup Mode? When any Ring product is in setup mode, it broadcasts a temporary wifi network.

Where is the orange button on Ring Doorbell?

While setting up your Ring Video Doorbell, you’ll be asked to put the device into “Setup Mode.” In order to put the device into Setup Mode, press and release the orange button on the back of the Ring Video Doorbell.

Why Is My Doorbell not working?

If you press the doorbell button and nothing happens, the first thing to check is the fuse or a tripped circuit breaker.Anything is possible with the button to cause a doorbell to stop working. Remove Doorbell Button Cover. Unscrew the button from the wall and make sure that you see two wires touching.

How do I connect my Ring Doorbell already installed?

If you already have another Ring device installed, simply open the Ring app. Tap Set Up a Device, then select Doorbells. The QR code or MAC ID can be found on the back of your Ring Video Doorbell. Point the camera on your smartphone at the QR code or MAC ID barcode on the back of your Ring Video Doorbell.

Why does Ring Doorbell go offline?

If your Ring Doorbell keeps going offline, it’s generally one of four common issues: what lies between your camera and router, Wi-Fi connectivity issues, power surges, and low battery. Other occurrences can create connection issues and cause your Ring Doorbell to lose connection, but they are not as typical.