After repowering, press the “fan” and the “up” arrow at the same time for five seconds. Press “Next” until ISU “39” is displayed, set it to option “0” with the arrow buttons, and press “Done.” This will cause the Wi-Fi radio to reset. Please restart the Wi-Fi enrollment steps from the beginning.
How do I reset the Wi-Fi on my Honeywell thermostat?
When registered with the Honeywell Home app Login, select the thermostat, then select the settings icon in the top-right corner. The Reset Wi-Fi option is located at the bottom of the screen. Follow the prompts in the app to reconnect, or to connect your thermostat to another Wi-Fi signal.
How do I reprogram a Honeywell thermostat?
How to reset Honeywell Thermostat 4000 series?
- Switch ON the thermostat.
- Press the PROGRAM button three times.
- Now, use a pointed object or wire and put it in the hole in the right side of the buttons.
- Hold for 2-5 seconds and release it.
- Voila! You have successfully reset your Honeywell 6000 series thermostat.
How do I reset my thermostat temperature?
A common way to reset almost any thermostat is to hold down the reset button for 5+ seconds. Alternatively, try resetting battery-powered thermostats by flipping the battery directions around for 5s, then flip them back. If all else fails, switch off the power at the circuit breaker for a couple minutes.
How do I reset my Honeywell thermostat without battery?
To manually reset a thermostat, first turn off your thermostat using the power control switch. Then, turn off the breaker on your electrical panel. Wait about a minute, and then turn both back on. This should give the system time to reset.
How do I reset my Honeywell thermostat schedule?
To clear the program schedule on your Honeywell Thermostat, press the Hold button. For all scheduled periods, this will overrule the set temperature. The programmed schedule is cleared when you hold down the Hold button, and you will be prompted to enter a new temperature setting for the thermostat.
Why is my Honeywell wireless thermostat not working?
Make sure the device you are connecting is on the same Wi-Fi network as the mobile device. Forget all other networks, and turn off mobile data. Turn on Airplane Mode and then turn on Wi-Fi and connect to the same Wi-Fi network the thermostat will be connected to.
The Honeywell T5, T5+, and T6 models have quick access reset mode without a button. If you press and hold the MENU button, a reset option will appear. Select the RESET option and confirm with the OK button. Your Honeywell T5, T5+, or T6 thermostat is now reset.
What is wrong with my Honeywell thermostat?
A Honeywell thermostat may be malfunctioning generally, and this is the cause of its inability to hold temperature. If your screen is blank and unresponsive, or flashing, it may mean your thermostat’s batteries are dying.If your thermostat looks totally fine, the problem is likely with the sensor.
How do I set the temperature on my Honeywell non programmable thermostat?
Non-Programmable Thermostats
Press the “Fan” button to set the fan on Auto or On. Press the “System” button to put the thermostat in Heat, Cool or Off mode. To change the setting, push the button again. The screen will display the setting you’ve selected.
How do you reset the battery on a Honeywell thermostat?
Factory Reset the Thermostat
- Ensure that your thermostat is turned off.
- Open the door of the battery compartment.
- Now take out the batteries.
- Put the batteries back on in reverse to the indicated polarity by the markings in the battery holder.
- Allow the batteries to stay this way for about five seconds.
How do I turn off the schedule on my thermostat?
If you want to cancel a schedule and turn off the schedule function, complete the following steps:
- Open the menu. Press the Menu button on the main screen of the Honeywell T6 Thermostat.
- Open the schedule menu.
- Cancel the schedule.
- Exit the menu.
How do you override thermostat settings?
Press and hold the temperature adjustment button. Doing this will allow you to override the current temperature for the duration of the current time period of the programming. Then you can adjust the temperature as you see fit.
Contents