Why is my gas fireplace not starting?
Another common issue with ignition is a dirty pilot light orifice, caused by a buildup of soot and dirt. If you have successfully re-lit your pilot light, ensured that the orifice is clean, and the fireplace still refuses to ignite, there could be an issue with the thermopile, thermocouple or wiring.
How do I reset my fireplace?
SOLUTION: Turn all switches to the off position and unplug the unit from the wall for five minutes. After five minutes, power everything back on.
What causes a gas fireplace flame to go out?
Basically, if the oxygen percentage in a room drops, the flame shape is altered by its incomplete combustion. The heat is then removed from the thermocouple, shutting off the gas valve. If the oxypilot becomes blocked with dust or soot, the flame lifts away from the thermocouple or flame sensing electrode.
How do you reignite a pilot light on a gas fireplace?
Hold the pilot button down for about 20 seconds to give the thermocouple time to heat up, then release it. The pilot should stay lit, but if it doesn’t, relight it and hold the button a little longer. Turn the button to the On position, then replace the fixed glass assembly and the decorative cover. You’re done!
Should I leave the pilot light on gas fireplace?
We recommend that you turn off your gas fireplace pilot light seasonally. Turning off your gas fireplace’s pilot light can save a substantial amount of energy and money. It is important to remember that not all gas fireplaces have standing pilot light, or, a pilot light that is always on.
Why does my gas fireplace keep going out and coming back on?
A thermo pile enables gas to move through the burner system, delivering the gas fireplace’s heat and light.One of these devices could have gone bad or may have shorted out, causing your fireplace to turn shut down or turn back on at random.
How long do gas fireplaces last?
How Long Can a Gas Fireplace Last? Generally speaking, you can get a good ten to fifteen years of use before you need to replace your gas fireplace.
How do you clean a clogged pilot light?
How to Clean a Pilot Light
- Cut off the gas to your furnace.
- Remove the pilot light and thermocouple assembly.
- Use your pliers or wrench to remove the pilot light and thermocouple from the bracket.
- Using the wire brush, brush away the carbon buildup and soot from both components.
Do gas fireplaces need to be cleaned?
While gas fireplaces don’t produce creosote, they do still need annual cleaning. Both propane and natural gas are clean burning gas fuels, so they don’t produce the same byproducts as wood, but they can still produce buildup that needs to be cleaned away.
Why does fireplace pilot light go out?
Some of the possible serious reasons for pilot lights to go out include loose or broken gas valves, thermocouples or heat exchangers, faulty venting, low gas pressure, or high winds. If you believe there is a serious problem, don’t hesitate to contact a professional.
Where is the pilot switch in my fireplace?
Locate the black knob on the left side (marked on/off/pilot). Push this button in and rotate counter-clockwise until the word Pilot lines up with the corresponding arrow.
What do I do if my pilot light won’t light?
If your pilot light won’t stay alight, it might be the thermocouple. Sometimes dust buildup collects on the thermocouple and blocks the sensor. Try cleaning the thermocouple and then relighting the pilot light. If it continues to go out, the thermocouple might need to be replaced.
How do you adjust the air mix on a gas fireplace?
Insert a flat-blade screwdriver into the setscrew on the right side of the valve and twist counterclockwise to increase the gas-to-air ratio. Turn the setscrew clockwise to reduce air flow mixing with gas. Ask a friend to describe the flame color and intensity in your Heat-n-Glo fireplace to help with your adjustments.
Why is my fireplace not working?
The thermocouple is a temperature sensor between the gas valve and the pilot light, and it will generate the electricity to ignite the gas when necessary. If the thermocouple is not screwed in properly, the fireplace won’t work. Check to make sure it is screwed in properly and placed correctly.
Why does my heat and Glo fireplace keep shutting off and on?
Very likely when the main burner is turned on the flame is starved for air to burn the gas. If you look closely you will probably see the color of the flame change, and observe the flame lifting off the burners and pilot burner.
How much does it cost to keep the pilot light on a gas fireplace?
The average fuel consumption of your standing Pilot light is: Natural gas is $0.60 a day = $219 a year. Liquid Propane is $1.80 a day = $657 a year.
Will gas leak if pilot light is off?
If the pilot light goes out on a storage or instantaneous hot water heater, space heater or a ducted heater, you will not have a gas leak. This is because all modern gas appliances with pilot lights have a fail-safe device that closes off the gas to the appliance in the case when the pilot may go out.
Do gas fireplaces have an automatic shut off?
Nearly every new gas fireplace comes equipped with safety features such as a 100% fail-safe shut-off valve. If the pilot flame goes out, the gas flow will automatically turn off.This device automatically shuts the gas off if the temperature in the fireplace gets too cold or if too much carbon monoxide builds up.
How do I clean the thermocouple on my gas fireplace?
How to Clean the Thermocouple in a Gas Fireplace
- Turn off the fireplace gas valve and remove the front panel from the fireplace.
- Find the thermocouple, which is located next to the pilot light and looks like a small straight pipe.
- Use a can of compressed air to gently blow away any dust and dirt from the thermocouple.
Contents