How Do I Reset My Bluetooth Speaker?

First, remove all the paired devices from the speaker. Then, press and hold the Bluetooth button and the power button simultaneously for more than three seconds to reset the speaker to factory settings.

What to do if Bluetooth speaker is not working?

What you can do about Bluetooth pairing failures

1. Make sure Bluetooth is turned on.
2. Determine which pairing process your device employs.
3. Turn on discoverable mode.
4. Make sure the two devices are in close enough proximity to one another.
5. Power the devices off and back on.
6. Remove old Bluetooth connections.

How do I reconnect my Bluetooth speaker?

What to Know

1. Put your Bluetooth device in pairing mode by pressing and holding the Power button or Pairing button.
2. iPhone: Go to Settings > Bluetooth > Other devices. Tap the device to connect.
3. Android: Go to Settings > Connected devices > Bluetooth. Select Pair new device and then tap the speaker’s name.

Why my Bluetooth is connected but no sound?

Make sure that the speaker has a BLUETOOTH connection with the BLUETOOTH device. Pair the speaker with the BLUETOOTH device again. The volume of the speaker or BLUETOOTH device may be low.If a cord is connected to the AUDIO IN jack of the speaker or to the BLUETOOTH device, unplug it.

Why my speaker is not working?

Check to make sure your audio devices aren’t muted and haven’t been disabled. Right-click the Speakers icon on the taskbar, and then select Open Volume mixer. You’ll see a set of volume controls for your devices. Make sure none of them are muted.

Why is my speaker not working even though its connected?

Make sure the volume of your computer isn’t set to mute. Close and re-open the audio playback app. Turn off the Bluetooth® function of your computer, and then turn it on again. Delete the speaker from the list of paired Bluetooth devices, and then pair it again.

Why is my Bluetooth speaker skipping?

Reset Your Wireless Bluetooth Headphones
Bluetooth technology can connect up to 7 devices without needing to reset. However, you can reset the settings to see if it’s pairing problems that could be causing the stutter. If you are using an android phone, you can also try clearing the cache.

How do I turn on Media Audio?

Check that Media audio is turned on:

1. Open your phone’s Settings app.
2. Tap Connected devices. If you see “Bluetooth,” tap it.
3. If you see Previously connected devices, tap it.
4. Next to your car or accessory’s name, tap Settings .
5. Turn on Media audio.

How do I fix the audio service is not responding?

4 Fixes for Windows 10 Audio Services Not Responding

1. Run services.
2. Use Command Prompt to add services.
3. Modify Registry: change the value data of ServiceDll.
4. Check audio components in Services.
5. Reinstall the audio driver in Device Manager.
6. Install the default sound drivers.
7. Use System Restore or do a clean install.

How can I test my phone speaker?

Tap the Phone icon.

1. Type in *#7353# into the dialer as though you are dialing a phone number.
2. You will be presented with a list of options.
3. Don’t get startled and drop your phone on accident!
4. Once you tap on Speaker, music should start to play.

How do I connect a speaker to my phone?

1. Step 1: Put the speaker in pairing mode. Switch on the speaker and long press the Bluetooth button on the device.
2. Step 2: Switch on Bluetooth on mobile phone. Go to settings in your phone (both Android and iOS) and select the Bluetooth settings option.
3. Step 3: Wait for the phone to connect.

How do I clear my Bluetooth cache?

Clear Your Android Device’s Bluetooth Cache

1. Go to the Settings on your Android device.
2. Select Apps.
3. Click ? to display your system apps.
4. Select Bluetooth from the list of apps, then select Storage.
5. Tap Clear Cache and exit your Settings.
6. Restart your device and try pairing it to your Reader again.

How do I set up Bluetooth audio?

Just follow these easy steps:

1. Open Settings.
2. Navigate to Devices.
3. Click Bluetooth & other devices in the left sidebar.
4. Set the toggle switch at the top to On.
5. To add a new device click add Bluetooth or other device.
6. Select Bluetooth.
7. Choose the device from the list.

How do I turn on Bluetooth sound?

Select Start > type Bluetooth > select Bluetooth settings from the list. Turn on Bluetooth > select the device > Pair. Follow any instructions if they appear. Otherwise, you’re done and connected.

Why is my audio not responding?

The most common cause of this error is actually your audio drivers. If your driver is outdated, damaged, or installed improperly, you may run into a number of audio issues including the “audio services not responding” error. Windows 10 users also noticed that this error occurs after installing a new Windows Update.

How do I reset my audio service?

9. Restart Audio Services

1. In Windows 10, right-click the Windows icon and select Run. Type services.
2. Scroll down to Windows Audio and double-click to open menu.
3. If the service has been stopped for any reason, the system audio will not function correctly.
4. Double-check the service start-up type.
5. Click Apply.

What causes audio services not responding mean?

The error “Audio services not responding” is an error message generated through Windows sound troubleshooter which is usually run when you are experiencing problems with your sound devices.This is a very common error and usually occurs when you upgrade your version of windows using Windows Update.

What is wrong with my phone speaker?

Turn off your device and turn it back on. If rebooting doesn’t do the trick, your phone may have some technical issue that requires you to turn it off and on.Before you clean the speaker, turn off the phone and remove the battery. Use a can of compressed air to blow quick bursts into the speaker.

How do you know if your phone speaker is damaged?

If you still don’t hear anything, it means the phone speaker is broken. This happens often, as the speakers are one of the most fragile parts of the phone. Speakers make sound waves by vibrating a very thing piece of material. The sound will stop working if the material is damaged at all.

How do you know if a speaker is damaged?

Physically inspect the speaker.
A blown speaker can have damage that can be heard with some mechanical movement. If you gently tap on the cone of the speaker it should have a firm drum like sound. If you hear a rattling sound (like a loose snare drum), this is an indicator of a bad speaker.