How Do I Reset My August Wifi?

How to Factory Reset an August Connect

  1. 1 Factory Reset. Make sure your Connect is plugged in. Press and hold the button on the front of the front of the Connect for 3 seconds.
  2. 2 Re-Setup? Factory reset removes everything from your August Connect. In order to use it again, you will need to re-setup the device.

How do I reset my August connect WIFI?

Open the August App and go to House Settings. Select the Doorbell or August Connect Settings menu. Scroll to Factory Reset. Select Reset Doorbell or Reset Connect.

How do I reset my Aug module?

How to Reset Your Connected by August Module

  1. Open the August App while you are in Bluetooth range of the lock.
  2. Go to House Settings and select the host lock.
  3. Open Lock Settings.
  4. Scroll to Factory Reset.
  5. Select RESET.

How do I connect my August doorbell to WIFI?

Tap Set Up A Device.

  1. Open the August Home App.
  2. Tap the Menu icon.
  3. Tap Settings.
  4. Tap Set Up August Connect.
  5. Tap Begin Scan to start connecting to Wi-Fi.
  6. Type in your Wi-Fi password.
  7. The Connect will show that is connecting.
  8. Tap Done.

How do I factory reset my previously owned August device?

Factory reset instructions

  1. On your phone, open the August App and go to the lock circle screen, which is the screen that shows you whether your door is locked or unlocked.
  2. Select the Settings menu (gear icon).
  3. Select the device you wish to reset.
  4. Scroll to factory reset.
  5. Select “Reset Lock”.

How do I fix August connect?

Check that your wireless router is plugged in and powered on. Then, connect your Wi-Fi to a computer or other device to ensure it is working properly. Your Wi-Fi name and/or password may have changed. Reset the Connect by holding down the button for 3 seconds and set up again using the August App.

See also  Is There A Lock That Cannot Be Picked?

How do I manually reset Google WIFI mesh?

How to reset a Google Wifi on the device

  1. Unplug the Google Wifi unit’s power cable.
  2. Begin holding down the reset button on the back of the device. Hold down the button on your Google Wifi device. Google.
  3. With the button depressed, reconnect the power source.
  4. When the unit flashes white, then blue, release the button.

How do I change my master code August?

Follow the Master PIN Code registration steps: Press the Gear button in the lower right hand corner of the keypad.
Follow the instructions below to update the Master PIN code:

  1. Enter the existing Master PIN Code and press the Gear sign instead of the check Press 1.
  2. The Lock will now ask you to enter the new Master PIN.

What is connected by August?

The Connected by August Module will allow you to lock/unlock, share access and see who comes and goes all from your August app.Connected by August Locks and Kits come with the August Connect Wi-Fi Bridge so you can lock and unlock from anywhere using your August app.

How do I reset my August doorbell camera?

Open the August App and go to House Settings. Select the Doorbell Settings menu. Scroll to Factory Reset. Select Reset Doorbell.

Does August lock work with WIFI?

Yes, August smart locks can be operated without Wi-Fi as they can also connect via Bluetooth or Z-Wave. However, you need Wi-Fi if you’re looking to control your lock remotely.

How do I reset my August Connect bridge?

To perform a hard reset on your Connect, leave the device plugged in and hold the reset button down for 5 seconds, then let go. You should see a pulsating green light, which indicates that the device is back in set up mode.

See also  How Often Should You Start Your Car At The Drive In?

How do you remove owner from August Smart Lock?

If you decide to remove an August Smart Lock device from your account, simply tap on the lock in the keychain inside the August app. Inside your Guest List, select the contact you’d like to remove, then choose Remove Self. The app will ask you to verify that you want to move the user—yourself—from the device.

How do I unregister August lock?

Open the August App. Select the lock from your Keychain. Go to the Guest List. Select REMOVE SELF.

How do I calibrate my August Smart Lock?

Smart Lock Needs Recalibration

  1. Open the August App and navigate to the affected lock.
  2. Select Lock Settings.
  3. Scroll to and tap on Calibrate Lock.
  4. Follow in-app instructions to recalibrate.

Why is my August app not working?

General Troubleshooting Steps
Make sure your phone’s OS is on the latest version and that your lock’s firmware is up to date. Stand near your Smart Lock and open the August App on your phone. Check that you can lock and unlock your door using the August App.

Why is my august lock flashing red?

A flashing red light on your Smart Lock indicates that your batteries need to be replaced. To resolve this issue, replace your existing batteries with a fresh set of 4 brand new AA Alkaline batteries.Instructions for changing the batteries in your August Smart Lock are available here.

Why is August lock unavailable?

If you are unable to operate the Smart Lock remotely using the App, your Connect Wi-Fi bridge may be offline. This article can help you get your August Connect back online. If you are unable to operate your Smart Lock using the App, we recommend rebooting the device.The lock will flash green.

See also  How Do I Open Deadlatch?

How do I connect to WIFI after resetting my router?

Click the Administration tab then click on the Factory Defaults sub-tab. Step 3: Under the Factory Defaults section, click on the Restore Factory Defaults button. After resetting the router to its default settings, reconfigure it according to your Internet service.

How do I restart my wifi router?

For some people the easiest way to reboot the router is to unplug the power supply, wait 30 seconds, then plug it back in again. Alternatively, there may be an on/off switch on the back of the router, in which case you can use that to turn it off, wait 30 seconds, and then turn it on again.

Will resetting my router mess up my Internet?

Well, yes, if you reset your router (modem), you will temporarily lose internet connection. Once it’s back up, you can reconfigure your router modem (to your appropriate settings), then everything should be back to normal.

Contents

This entry was posted in Smart Lock by Alyssa Stevenson. Bookmark the permalink.
Avatar photo

About Alyssa Stevenson

Alyssa Stevenson loves smart devices. She is an expert in the field and has spent years researching and developing new ways to make our lives easier. Alyssa has also been a vocal advocate for the responsible use of technology, working to ensure that our devices don't overtake our lives.