How Do I Reset My Alloy Smart Plug?

Factory Reset an Alloy Home Smart Plug Ensure plug is powered on. Press and hold the code button for 10 seconds until LED light is on then release the button. If reset successfully, LED light will flash five (5) times.

How do I reset my alloy home?

For Alloy Home or Zipato hubs:

1. Hold down Button 2 until the light on top of the hub goes out.
2. Release the button to begin the rebooting cycle. While the hub is rebooting, you will notice the light will change to blue.
3. Wait about 2-3 minutes for the hub to reboot.

How to connect to Alloy Smart hub?

How to Install Alloy SmartHome Hub

1. Determine the best spot to mount the hub. If a site survey was performed, use the location determined from the survey.
2. Remove all components from the box and screw on antennas.
3. Mount the DIN rail using two screws.
4. Plug the hub into the outlet to ensure it has enough time to power on.

What is an alloy smart plug?

Control lamps and other small electronic devices remotely with the Alloy SmartHome plug. Set schedules, monitor energy consumption, control devices and automate your lighting, all from a single app. Save money on electricity and enjoy a more efficient home with this small and inconspicuous smart plug.

What does alloy smart home do?

Our platform allows sellers to remotely control access, temperatures, lighting, blinds and more for model and inventory homes. You’ll gain visibility into for-sale homes status with monitoring and automatic alerts for any security, leaks or other issues that may arise.

How do I connect my alloy smart plug?

Including the Alloy Home Smart Plug

1. Press the button on the face of the plug to ensure the plug is powered on.
2. In Community Manager, put the hub into inclusion mode by clicking include.
3. On the plug, press the code button three (3) times within one and a half seconds to enter inclusion mode.

How do I reset my Smart Home Hub?

First, power off the hub by unplugging the power cable from the back of the hub. Then, using a pin or a similar tool, hold down the Reset button located on the back of the hub. Continue to hold down the button and reinsert the power cable.

How do I turn on alloys in my house?

How to Use Your Alloy Home Thermostat

1. With the screen on, press the side button once.
2. Using the + and – buttons, to cycle through to the modes: heat, cool, off, and heat/cool, which acts as auto mode.
3. Once the mode is on the screen, press the side button once to confirm the switch to that mode.

What is an alloy home?

Alloy SmartHome is a smart home automation system that allows homeowners to manage connected smart devices from a single app. Control your lock, thermostat, lighting, plus monitor your home for leaks, temperature and humidity alerts, and more from one user-friendly interface.

How do I connect my SmartRent hub to WiFi?

How to Connect SmartRent to Wi-Fi

1. You can connect directly via the provided Ethernet cable that is plugged into the hub. To accomplish this simply plug in the other end of the Ethernet cable into your internet router.
2. You can connect over WiFi in the SmartRent mobile app.

What is Zwave plus?

Z-Wave Plus™ is a certification program designed to help consumers identify products that take advantage of the ‘Next Gen’ Z-Wave hardware platform, also known as 500 Series or 5th Generation Z-Wave.

What is smart rent smart plug?

Simple remote management and control of lights or fans
Smart plugs offer a cost-efficient way to add smart home connectivity and remote management capabilities to non-IoT connected lamps, electronics and other small devices. Residents will love the option to easily add their own items to their smart home app.

How do I connect my Alexa alloy home plug?

How to Connect a Smart Plug to your Alexa

1. Plug your smart plug into an outlet.
2. Download the app that goes with your smart plug app.
3. Set up your smart plug in the app.
4. Launch the Alexa app.
5. Tap the menu on the Alexa app.
6. Select Skills & Games.
7. Tap the magnifying glass to search for your smart plug skill.

How do I connect my hub to the Internet?

How to Connect Your Hub to Local Internet

1. You can connect directly via the provided Ethernet cable that is plugged into the hub. To accomplish this simply plug in the other end of the Ethernet cable into your internet router.
2. You can connect over WiFi in the SmartRent mobile app.

How do I access Internet hub?

How to access the Connection Hub settings

1. Open a web browser.
2. When prompted, enter the Connection Hub username (the default is admin).
3. Enter the Connection Hub password (the default is admin).
4. Click OK.
5. Your Connection Hub status page will appear. From here, you can access the settings.

What is the difference between Z-Wave Plus and Z-Wave?

Some of the main differences between Z-Wave vs Z-Wave Plus include: Battery – Z-Wave Plus offers 50% more battery life. Range – Devices are able to communicate up to nearly 200 feet further with Z-Wave Plus.Bandwidth – The network is able to handle 250% more data Z-Wave Plus.

Is there a monthly fee for Z-Wave?

At $9.99/month, the fee can be hard to swallow, especially when you realize there are many Z-Wave hubs out there that do just as much, or more, while requiring no monthly fees.