To reset the thermostat, hold the thermostat in your hand with the back facing you. Hold down the ‘+’ and ‘-‘ buttons on the front of the thermostat at the same time. Keep a hold of those buttons while putting the battery back in and keep holding them in until the word ‘FIND’ appears on the screen.
How do I reconnect my Hive heating?
Hold the central heating button down on the receiver until the status light flashes pink. Release the button then press and hold it again until the status light is double flashing amber. To reconnect the receiver to your hub, put your hub into pairing mode by selecting ‘Install devices’ in the Hive app menu.
Why is my Hive heating not coming on?
Check that your broadband connection is working and that your Hive Hub is showing a green light. 2. Check that your Hive Thermostat is available in your app.Once you have verified the furnace has power, try removing the thermostat body from the wall and check that all the wires are connected securely to the terminals.
How do I get my Hive back online?
You can reconnect the hub to your Wi-Fi by going to your Hive app, tap the Hub 360, Settings, Change Wi-Fi, and follow the in-app instructions. Step 6. Go back to ‘Menu’ in the Hive app, tap ‘Manage devices‘ then refresh the page. If the hub is showing as ‘connected’ you’re done!
How do I reset my Hive hub UK?
The Hive Hub can be reset by pulling the power cable out and putting it back in again. It will take about 5 minutes to fully reboot and pair to your devices. After the 5 minutes, refresh the app or website.
Why is my Hive not connecting?
Check that your Hive hub is connected to the mains power socket and switched on. 4. Check any Signal Boosters (formerly known as SmartPlugs) you have are switched on and in the recommended location.For Hive Active Plugs check that the electrical device you have plugged into your Hive Active Plug is switched on.
How do you use hive heating manually?
How do I change the heating mode on my Hive Active Heating 2…
- Push the dial to wake up the thermostat.
- Once the screen turns on press the Menu button and select Heat.
- Here you’ll see the different modes: Schedule, Manual and Off.
- Select one by turning and pushing the dial.
Why isn’t my boiler firing up?
A boiler might not ignite due to various possible reasons insufficient pressure, blockage in the burner, faulty valves, frozen pipes etc. Sometimes, you can fix the problem on your own. In other cases, you don’t have any choice but to call an engineer.
Why is my wireless thermostat not working?
Common issues you will find with a wireless thermostat are application bugs, signal interference, and a faulty wireless relay box. If resetting didn’t fix the communication problems, try addressing these issues first. When things don’t improve, you can narrow it down to faulty hardware.
Can you factory reset a hive hub?
The Hive Hub can be reset by pulling the power cable out and putting it back in again. It will take about 5 minutes to fully reboot and pair to your devices. After the 5 minutes, refresh the app or website.
How long does it take for hive thermostat to reconnect?
This usually takes 5-10 minutes. Once the AMBER light is flashing, the hub is set up and you can move onto installing the receiver. If no lights are displayed immediately after the hub has been turned on, check all cables are connected and the power socket works.
How do I calibrate my hive thermostat?
While calibrating
Want to speed up the process? There’s a special calibration cycle available in app version 10.15 onwards. To test that your Hive Radiator Valve is working while it calibrates, use the dial on the front to set it to a high temperature. The valve should open immediately.
How do I refresh Hive app?
How to force a refresh. Outside of the scheduled refresh, you can force a refresh at any time. please select your app and then select edit. Select Force Refresh, the refresh can take up to 15 minutes.
What do the lights mean on a hive hub?
The lights on the Hive Hub indicate how the Hub is operating at that specific time. – No light = The Hub has no power. – Solid green = The Hub is connected and should be operating normally. – Solid red = The Hub can’t find an Internet connection. – Fast flashing green = The Hub is trying to connect to the Internet.
Why is my hive flashing white?
If your receiver is displaying a flashing white status light, this indicates that it is in stand-alone mode and is actively seeking to connect to a Hive thermostat.
How do I reset my thermostat?
Here are the step-by-step reset instructions:
- Turn your thermostat off by switching it to the off position.
- Find the breaker that powers your HVAC system and turn it off.
- Wait 30 seconds and turn the breaker back on.
- Turn your thermostat back on.
How do I reconnect my hive to my boiler?
Lift your thermostat off the hooks that hold it against the wall and take your thermostat to the receiver which you will find near to your boiler/hot water tank. Remove the batteries and put them straight back in again. This will turn the thermostat off and on which should help establish a connection to the receiver.
Can hive be operated manually?
The Hive Active Heating 2 thermostat has been designed to be easy to use.You can use your Hive thermostat to control your heating and hot water manually when at home.
What temperature should I set my hive to?
Turn the heat down by one degree
Instead, just set it to the lowest comfortable temperature (typically somewhere between 18 and 21 degrees).
How do you set the hive thermostat to schedule?
On your thermostat, tap ‘Menu’, select the mode you’d like to use and then you will see the ‘Schedule’ option. You can either activate the current schedule or create a new one by selecting ‘Start Over’, and following the onscreen instructions.
How do you restart a boiler?
Follow these simple instructions to reset your boiler:
- Refer to your boiler manual.
- Push the reset button for 10 seconds.
- Wait 2 – 3 minutes, the boiler should fire up.
- Repeat twice if the first attempt fails.
- If the boiler still fails to fire up on the third attempt, double check the gas supply.
Contents