How Do I Reset Ecobee Homekit?

How to reset your Ecobee3 HomeKit connection

  1. Go to your Ecobee3 thermostat and tap on the Main Menu button (the three lines in the lower left corner).
  2. Scroll down to Settings and tap on it.
  3. Scroll down to Reset and tap on it.
  4. Tap on Reset HomeKit.
  5. After the warning, tap on the Yes button.

How do I reconnect my ecobee to HomeKit?

Apple Home app

  1. Open the Home app on your iPhone.
  2. Tap Add Accessory. (If you already have other HomeKit accessories paired, tap + in the top-right corner to add an accessory.)
  3. Your HomeKit code should appear on your thermostat. Scan it with the Home app to pair your ecobee.

How do I find the HomeKit code on my ecobee?

Your Apple HomeKit Code can be found on the back of your ecobee Switch+ wall plate and on the back of the Switch+ installation manual.

Is there a reset button on ecobee?

If you find yourself needing to reset your ecobee Switch+, simply follow these steps: Press and hold the main button for 5 seconds. Wait for the voice prompt to say “Reset to factory settings.” Press the main button again.

How do I reset my ecobee app?

  1. Go to MAIN MENU > SETTINGS > RESET.
  2. Select “Reset Registration”
  3. Select “Yes” in the bottom right corner.

Why is my ecobee unresponsive?

This is most likely happening because your ecobee is not connected to wi-fi or your ecobee mobile app. To check your ecobee’s wi-fi connection, from your ecobee select Menu > Settings > Wi-Fi > Wi-Fi Enabled > Network. If so, log in to the ecobee app and ensure your thermostat is connected.

See also  What Are The Benefits Of Intelligent Lighting?

How do I make ecobee discoverable?

How to enable the ecobee skill

  1. Open the Alexa app and tap the top left Menu icon.
  2. Tap Skills & Games.
  3. Tap the magnifying glass icon and type in “ecobee” to search for the ecobee skill.
  4. Tap ecobee from the list of skills.
  5. Tap Enable to enable the skill.

Where is the ecobee 3 Lite HomeKit code?

At the top of the screen, right-hand corner, select the + symbol to open a drop-down menu. From the menu, select Add Accessory. When you do this, a “HomeKit” code will appear on the touchscreen of the Ecobee 3 Lite. It will be an eight-digit code combined with a QR symbol for scanning.

How does HomeKit work with ecobee?

HomeKit allows you to use Siri voice commands to control your ecobee, as well as programmable “Scenes” to control multiple accessories with a single command and set location-based triggers to activate scenes when arriving or leaving your home (geofencing).

How do I delete a HomeKit scene?

To edit the scene, tap “Actions,” select each product and choose what the accessory should do in this scene. To save your adjustments, tap “Done” in the upper right corner. 4. To delete the scene, tap “Delete Scene” at the bottom of the screen.

How do I force ecobee restart?

You can reboot the Smart Si thermostat by pressing the physical hardware reset button, located through an opening in the bottom left corner of the Smart Si thermostat. Rebooting will not alter programming or configuration options.

How do I reset my ecobee without access code?

How do I reset my ecobee password?

  1. Navigate to the login page on your mobile device, or web browser.
  2. Select “Forgot password?” and enter the email address associated with your ecobee account.
  3. You should receive an email with a link to reset your password.
  4. Once you complete, you will receive a final confirmation email.
See also  Can Too Many Wireless Devices Overload A Router?

How do I calibrate my ecobee?

To Configure Temperature Correction

  1. Press Menu on the main screen.
  2. Go to Settings.
  3. Then go to Installation Settings.
  4. Select Thresholds.
  5. Then select Temperature Correction.
  6. Adjust the temperature reading to fit your needs.

How do I unregister ecobee?

How do I unregister a thermostat and remove it from my account?

  1. Sign into the ecobee app.
  2. Select your Home and then select the thermostat you wish to unregister.
  3. Select the Main Menu icon in the bottom left and then select Device Settings.
  4. Select Remove Device.
  5. On the confirmation menu, select Remove Device again.

Why is Alexa not working on my ecobee?

If Alexa says your ecobee device is not responding, it usually means your ecobee has lost connection to Wi-Fi. If the device in question is a room sensor, it usually means the sensor has lost communication with the thermsotat it is paired to.

How long does it take for ecobee to calibrate?

The “Calibrating” message on your Ecobee thermostat screen indicates that it is measuring the current indoor temperature. Ecobee calibrates once it’s installed initially or when it reboots, and it typically takes around 5 to 20 minutes.

How do I turn on my ecobee fan?

3. Quick Changes

  1. Tap the Quick Changes menu icon (the gear icon with 3 lines on the bottom of the thermostat screen)
  2. Tap the Fan Hold button.
  3. Using the horizontal dial, select a preferred time duration for the fan to run in ON mode.
  4. Tap the < in the top left to leave the menu.
  5. Exit the Quick Changes menu.
See also  Is Ai The Future Of Computer Science?

How do I control ecobee with Siri?

Setting up the integration is simple: pair the Ecobee to HomeKit from the thermostat’s screen, then add it as an accessory through the Home app, and an option to “Speak to Siri” will pop up. From there, you can tailor the experience (such as deciding if you want to enable personal requests).

Can you connect ecobee to Google home?

The Ecobee3, Ecobee3 Lite, and Ecobee4 can now all be controlled from the Google Home or any other device that supports the Google Assistant. That means you’ll be able to use voice to set or check the temperature, or nudge in it one direction or the other with a phrase like “OK Google, make my home warmer.”

How do I connect my ecobee to WIFI?

To connect your Ecobee thermostat to your Wi-Fi network:

  1. From the Home screen, press Menu.
  2. Then select Settings.
  3. Go to Wi-Fi.
  4. Make sure Wi-Fi Radio is Enabled.
  5. Go to Network.
  6. Tap on Select Wi-Fi Network.
  7. Pick your Wi-Fi network from the list and enter your Wi-Fi password if required.
  8. Tap OK to exit.

Can’t connect to my ecobee?

My ecobee is not connecting to ecobee servers

  1. Try power-cycling the ecobee by removing it from the wall and leaving it off for two minutes.
  2. After two minutes, place the ecobee back on the wall.
  3. To reconnect to Wi-Fi, go to MAIN MENU > SETTINGS > WI-FI > NETWORK > SELECT WI-FI NETWORK.

Contents

This entry was posted in Smart Home by Alyssa Stevenson. Bookmark the permalink.
Avatar photo

About Alyssa Stevenson

Alyssa Stevenson loves smart devices. She is an expert in the field and has spent years researching and developing new ways to make our lives easier. Alyssa has also been a vocal advocate for the responsible use of technology, working to ensure that our devices don't overtake our lives.