Deleting User Codes on a Defiant Electronic Deadbolt
- Step 1: Press the SET button and hold it until it beeps.
- Step 2: Release the SET button and enter your Master Code.
- Step 3: Press 3 and 0 and then hit the Lock Button.
- Step 4: Enter the user code you want to delete and press the Lock Buttonto delete it.
How do I change the code on my electronic door lock?
First, open the door and lift off the lock’s interior cover. Press the Program button once and you should hear your unit beep five times and see its checkmark icon at the keypad’s bottom left flash five times. Press the checkmark once and then enter the master code.
Why is my defiant lock beeping?
Specifications and Functions
Power supply 4 AA, 1.5V Alkaline batteries 2. Low battery indication 2-1 During operation, if the LED on the battery cover flashes red and constant beeping is heard for 10 seconds, it means that the battery is low. The batteries need to be replaced immediately.
Who owns Defiant locks?
Taiwan Fu Hsing Ind. Co. Ltd
That’s because Defiant locks are actually made exclusively for Home Depot by the Taiwanese manufacturer Taiwan Fu Hsing Ind. Co. Ltd, and have been for almost 25 years, according to one of the brand’s promotional videos.
How do you change the master code on a defiant lock?
So here’s how to do that:
- Press and hold the SET button until you hear a beep before releasing it.
- Enter your current Master Code and press the Lock button.
- Press 2, 0, and then press the Lock button.
- Now enter a new User Code (4-6 digits) and then press the Lock button.
- That’s all about adding a new User Code.
Are Defiant locks bad?
The Defiant deadbolt has a reputation of being one of the lowest quality locks in stores. It also comes with the lowest price tag of less than $10 a deadbolt. I didn’t have many expectations of this lock, but I was actually slightly surprised by the results. Avg Pick time: Picking was not successful.
How many keys come with a defiant lock?
Defiant Satin Nickel Deadbolt Lock with Night Latch, Holdback Button Single Cylinder Rim and Two Keys – Heavy Duty Defender Security Door Lock Hardware.
Are all defiant keys the same?
It varies normally by the number of locks in the case. If a manufacturer has small cases of say four pieces, they may key all of them the same.
How do you change the battery in a WYZE lock?
To replace the battery:
- Locate the Pin included in your Starter kit, or a similar thin, flat-edged tool.
- With the flat side of the tool, open the battery cover.
- Remove the old battery.
- Wait 20 seconds.
- Insert the new battery with the positive side ( + ) up and visible.
- Wait for the sensor status light to flash once.
How do I change the code on my vivint lock?
SkyControl 3.0 – Change Door Lock Code
- At the home screen, tap the menu icon in the lower right.
- Tap Users.
- Enter your 4-digit PIN.
- Select the user you want to edit.
- Make sure their Separate lock PIN option is toggled on.
- Select Lock PIN to add or edit their door lock code.
How do you remove a deadbolt lock without a key?
Pick the Lock Using Bobby Pins
One of the best-known ways to unlock a deadbolt without a key is by using two bobby pins. Start by inserting the closed “looped” side of one bobby pin into the bottom portion of the lock. Use the second bobby pin, broken in half, toward the top of the lock and move it back and forth.
How do you reset a defiant deadbolt?
How to Factory Reset a Defiant Electronic Deadbolt
- Remove the lock’s battery cover and then remove one battery.
- Press and hold the SET button. Next, insert the battery back while still holding the SET button.
- Enter the default Master Code to complete the factory reset.
How do you remove a deadbolt faceplate?
Insert a flat-head screwdriver putty knife or similar tool into the notch or under the faceplate edge, prying outward with gentle pressure. The plate will unsnap from the interior mounting ring and will remove by pulling outward along the lever shaft.
Contents