How Do I Remove A Code From Kwikset Smartcode 888?

How do you reset a Kwikset 888 Smart lock?

You can factory default your Kwikset Z-Wave Lock by removing the lock’s cover and then removing the lock’s battery pack to power the lock down. Then press and hold the “Program” button. Keep the button held down as you reapply power to the lock. Then wait, and press one more time to reset.

How do you change the 4 digit code on a Kwikset lock?

Manually put the bolt in the extended (lock) position. Press the PROGRAM button once, enter your new 4 – 8 digit code and then press the LOCK button. 2. Press the PROGRAM button twice, enter the same or a new code and then press the LOCK button once.

How do you change the code on a Kwikset Halo?

For Aura and Halo Series of Locks Using App

1. Open the Kwikset app.
2. Tap the Menu icon.
3. Select Account Settings.
4. Select Account.
5. Select Change Password.
6. You will be prompted to enter your old password, then the New Password fields must be filled out.

How do I remove a code from Kwikset SmartCode 910?

Deleting a user code In order to delete a user code, you must override the code by adding a different user code in the same position. For example, if you want to delete the third code, add a different user code in position three. NOTE: Test the old user code to make sure it can no longer unlock the door.

How do I reset my Kwikset Smart Lock?

1 Factory Reset

1. Open your door.
2. Extend the latch bolt.
3. Slide up the cover to open the back of your lock, exposing the buttons beneath.
4. Push and hold the reset button for 10 seconds, until the lock beeps.
5. The light ring will flash red, then spin amber.
6. The lock has now been restored and is ready to be set up again.

How do I change the code on my Kwikset Smart Lock?

How to add a user code on my Smartcode touchscreen?

1. Keep door open. Press the Program button once.
2. Press Checkmark symbol once.
3. Enter Mastercode.
4. Press Lock symbol once.
5. Enter new user code.
6. Press Lock symbol once.
7. While the door is open and locked, test the user code to make sure it unlocks the door.

How do I remove a code from Kwikset SmartCode 909?

Deleting a user code In order to delete a user code, you must override the code by adding a different user code in the same position. For example, if you want to delete the third code, add a different user code in position three. NOTE: Test the old user code to make sure it can no longer unlock the door.

How do I change the code on my Kwikset lock 909?

Changing the Code Step-by-Step
While the door is open, press the “Program” keypad button located on the interior side of the door. Enter a four to eight digit security code that you can easily remember on the outside electronic lock keypad. Press the “Lock” keypad button at the center of the SmartCode keypad.

How do you change the code on a Kwikset 916?

1. Make sure the door is open. Press the Program button once.
2. Press checkmark symbol once.
3. Enter user code. A total of 16 user codes may be programmed. Each user code must be a unique code between 4 and 8 digits.
4. Press lock symbol once.

How do I change the code on my Kwikset SmartCode 913?

How do I program my SmartCode 913 lock?

1. Open the door.
2. Remove battery cover.
3. Press the program button once.
4. Enter new user code.
5. Press lock button.
6. If programming is successful the keypad will flash green once, and you will hear one beep. Connect with us. Monday-Friday: 7:00am-4:00pm PST. Saturday: 6:30am-2:30pm PST.

Where is program button on Kwikset lock?

For most Kwikset smart locks, the program button is on the inside of the interior assembly. You may need to remove the interior cover to access the program button.

How do I change the code on my Kwikset 264?

How do I add/delete a user code on my 264 Deadbolt?

1. Enter your Programming Code.
2. Press “”Kwikset”” then “”1″” then “”Kwikset””
3. Enter a new User Code. It must be between 4 and 10 digits.
4. Press “”Kwikset””
5. Test the code: While your door is open, lock it and enter your new User Code to make sure it unlocks the door.

How do I change the code on my Kwikset 955?

How to enable/disable programming code on my SmartCode 955?

1. A programming code enables you to make changes without needing to access the programming button.
2. Make sure the door is open.
3. Press 3.
4. Press Kwikset button.
5. Enter a programming code.
6. Press Kwikset button.
7. Re-enter programming code.