How Do I Register For August Connect?

A Connected by August Module can be registered on a lock with or without a keypad.

Master Entry Code Not Set

1. Press or select the Gear key in the lower right hand corner of the keypad.
2. Press or select ‘1’ then the Gear key.
3. Enter a 4-8 digit Master Entry Code.
4. Press or select the Gear key to complete steps.

How do I set up my August connect?

To install your August Connect:
In the August App, go to the side menu (upper left), tap Set Up New Device. Choose Set Up An August Connect. Choose a lock with which to associate your Connect. When prompted, plug connect into an outlet near your door and then follow the in-app instructions.

How do I log into my august account?

Use the Email login method if you have lost your phone or if you are locked out. From the sign in screen, select SIGN IN. Enter the phone number and password associated with your account. A verification code will be sent to your phone.

How does August Connect work?

August Connect plugs into any power outlet near your August Smart Lock and uses your home’s Wi-Fi and Internet connection to control your August Smart Lock. With August Connect, you can unlock or lock your door for guests, check your lock’s status and receive instant notifications from anywhere through the August app.

How do I setup a wireless bridge?

Here’s how to do it.

1. Position the bridge. Place the wireless bridge within range of your wireless router’s signal, and also within a cable’s length of your wired devices.
2. Connect the bridge to your network. If your router supports Wi-Fi Protected Setup, or WPS, setup is easy.
3. Plug in network devices.

Where is the QR code on my August lock?

The QR Code is located on the inside of the front battery cover. To remove the cover, simply press down on the August logo located at the bottom of the face plate.

Can August lock be hacked?

It is possible for August Smart Lock to be hacked, but it is not common. August Smart Lock is connected to the user’s Wi-Fi, and can also be paired to smart devices through Bluetooth. This makes it possible for hackers to manipulate the smart lock through other connections. This is rare, but possible.

What is my unlock pin?

Android 4.4 and Below
To find this feature, first enter an incorrect pattern or PIN five times at the lock screen. You’ll see a “Forgot pattern,” “forgot PIN,” or “forgot password” button appear. Tap it. You’ll be prompted to enter the username and password of the Google account associated with your Android device.

Can WiFi locks be hacked?

Not only can many smart locks be hacked, but they also are proven to have other vulnerabilities like the ability to be removed with a flathead screwdriver. Since smart locks often work with an existing deadbolt, this may mean they have the same level of security as traditional locks.

How do you set up the August app from an invite?

Simply send each guest an invitation to download the app.
iOS

1. Open the August App and select the Guest Icon from the menu on the lower right of the screen.
2. Select Invite and then choose an invite option.
3. Select Send Invite once you have added your guest and designated their access level and type.

Can you use August Smart Lock without connect?

The August Wi-Fi Smart Lock has everything built inside and can connect to the Internet without a Connect Bridge. If you have an August Smart Lock or a Smart Lock Pro (Generation 1, 2, or 3), your smart lock will function locally via Bluetooth connection without a Connect Bridge.

Does August work with HomeKit?

Yes, if you have a compatible Apple bridge within Bluetooth range of your August Smart Lock that is setup to work with HomeKit. You can then use Siri remotely or operate remotely through the August app.

How do I reconnect August lock to Wi-Fi?

Android

1. Open the August App and select the associated Home from your Keychain.
2. Select the gear icon to navigate to Lock Settings.
3. Select the associated device to open Lock Settings.
4. Scroll to the Utilities section and select Connect to Wi-Fi Network.
5. Select BEGIN WI-FI SETUP.

How do I put my August keypad in setup mode?

Once you receive the reset code, push the logo button on the Smart Keypad.
Follow these steps to put your Keypad into setup mode:

1. Open the August App and go to House Settings.
2. Select the Keypad to enter Keypad Settings.
3. Select Disconnect Keypad and then the blue DISCONNECT button.

How do I update August Connect firmware?

Open the August App and ensure the phone can connect to the lock over Bluetooth. A firmware popup notification should appear. Select Retry Firmware. When instructed, hold down the Keypad button until you see the firmware progress bar.

How do I enable bridging on my primary router?

IMPORTANT: Obtain the wireless settings of the main router first before proceeding.

1. Enter “http://192.168.1.1” in your web browser’s Address bar and log in to the router’s web-based setup page.
2. Click Connectivity.
3. Click Internet Settings.
4. Click Edit.
5. Select Wireless Bridge.

How do I bridge a link in my router?

Steps to Configure D-Link Wireless Router in Bridge mode

1. Type 192.168. 0.1 on the Browser address bar, and press the enter key. Username: admin. Password: no password. Click the Login button.
2. Click on Manual Internet Connection Setup.
3. Check Enable Wireless Bridge mode box and click on save settings.

What is the difference between a WiFi Bridge and extender?

Repeater. The wireless version of a repeater is called a “range extender.” A wireless bridge enables non-wireless devices to connect to wireless networks.

Where is QR code on Yale lock?

When setting up your product, the app will ask you to first scan your Yale Access QR Code. This code is located on either documentation insider your packaging, on your smart module, or on the battery cover of your product. If you cannot locate your QR code, you can manually enter the serial number into the app.

What is August DoorSense?

With DoorSense on your door, your August Smart Lock can detect when your door is open or closed in addition to whether or not the deadbolt is locked. If you accidentally leave the door open as you are rushing to work in the morning, you will receive an alert through the August app.

Can August connect to ring?

August Smart Lock Pro also works with Ring Alarm. Ring Alarm is a DIY security system that incorporates security sensors, Z-Wave, Zigbee, and Ring cameras. With the integration, you create rules for your lock and security system to follow.