How Do I Register Ecobee4?

In the ecobee App

1. Launch the ecobee app on your mobile device.
2. Select Register Your Device.
3. Select ecobee Thermostat from the device list.
4. Enter the registration code retrieved from the thermostat screen and tap Next.
5. Once you’re finished, return to your thermostat and tap OK to complete the registration.

Where is the registration code on ecobee 4?

Obtaining the Registration Code
Tap the three horizontal bars on the bottom left corner of the ecobee screen to open the Main Menu. After completing these steps, the code will then be displayed on the thermostat’s screen.

How do I register my ecobee thermostat?

On the ecobee, go into the Main Menu > Setting > Reset > Reset Registration. Then they’ll be able to register the ecobee from Main Menu.

Where is ecobee HomeKit code?

1) Select Don’t Have a Code or Can’t Scan? 2) You’ll see a list of all available devices currently on your network. Select your ecobee thermostat from the list. 3) Your HomeKit code should appear on your thermostat.

How do I reset my ecobee without access code?

How do I reset my ecobee password?

1. Navigate to the login page on your mobile device, or web browser.
2. Select “Forgot password?” and enter the email address associated with your ecobee account.
3. You should receive an email with a link to reset your password.
4. Once you complete, you will receive a final confirmation email.

How do I reset my ecobee4?

1 Factory Reset

1. From the Home screen, press Menu.
2. Select Settings.
3. Go to Reset.
4. Choose Reset All Settings then confirm your selection by pressing Yes.
5. Choose the reset option that suits your needs:
6. The ecobee thermostat will be reset to factory defaults.

How do I add ecobee thermostat to App?

Step 1: From your home screen, swipe to the left to open the app widget screen and scroll to the bottom to find Edit. Step 2: Select Edit and find ecobee on the list of apps you can add to your widget screen. Tap on the + icon next to the ecobee option to add this widget and hit on Done to complete the process.

How do you reset ecobee for new owner?

To reset your Ecobee:

1. Make sure the Ecobee is turned on and properly connected to power.
2. On your thermostat, navigate to the icon for the Main Menu.
3. From the Main Menu, select the option for Settings.
4. Under settings, there will be a choice for Reset.
5. When you get here, select Reset Registration.

Can’t connect to my ecobee?

My ecobee is not connecting to ecobee servers

1. Try power-cycling the ecobee by removing it from the wall and leaving it off for two minutes.
2. After two minutes, place the ecobee back on the wall.
3. To reconnect to Wi-Fi, go to MAIN MENU > SETTINGS > WI-FI > NETWORK > SELECT WI-FI NETWORK.

Why is my ecobee thermostat not working?

Open the panel on your furnace to expose the control panel where your thermostat wires are connected. Most systems have a purple 3 or an orange 5 amp fuse on the board—check this fuse to ensure that it’s intact. A blown fuse will have to be replaced. Once a blown fuse is replaced, the ecobee should power back on.

How do I connect my Honeywell thermostat to my phone?

Download the Honeywell Total Connect Comfort app. It’s available for both iOS and Android. Verify that the words “Wi-Fi SETUP” are displayed across the thermostat’s screen. If not, you’ll have to manually put the thermostat into Wi-Fi setup mode.

How do I enable ecobee HomeKit?

On Your Mobile Device

1. Launch the ecobee app.
2. Go to the Menu in the top left.
3. Select Setup Homekit.
4. Tap Get started.
5. Enter a name for your home then tap Done.
6. Select the right home for your location, if you have more homes listed, then tap Next.

How do I reset ecobee HomeKit?

How to reset your Ecobee3 HomeKit connection

1. Go to your Ecobee3 thermostat and tap on the Main Menu button (the three lines in the lower left corner).
2. Scroll down to Settings and tap on it.
3. Scroll down to Reset and tap on it.
4. Tap on Reset HomeKit.
5. After the warning, tap on the Yes button.

Does HomeKit override ecobee?

HomeKit allows you to use Siri voice commands to control your ecobee, as well as programmable “Scenes” to control multiple accessories with a single command and set location-based triggers to activate scenes when arriving or leaving your home (geofencing).

How do I calibrate my Ecobee thermostat?

To Configure Temperature Correction

1. Press Menu on the main screen.
2. Go to Settings.
3. Then go to Installation Settings.
4. Select Thresholds.
5. Then select Temperature Correction.
6. Adjust the temperature reading to fit your needs.

What is my ecobee access code?

For security purposes, the access control code can only be released to the email address that’s registered to your ecobee. The best way to reset the code is to login to the Web Portal and disable Access Control remotely: Login to ecobee.com. Click on SETTINGS > ACCESS CONTROL.

How do I get my ecobee off hold?

How do I adjust the hold setting? You can change your hold preference to hold for 2 hours, 4 hours, Until the Next Scheduled Activity, Until I Change It or Decide at the Time of Change. To do this, just tap MAIN MENU > SETTINGS > PREFERENCES > HOLD ACTION and make the changes you like.

How do I transfer my ecobee account to a new owner?

No, ownership cannot be transferred. Alternatively, you can unregister each device from one account, and register it to the other.

How do I change my email on my ecobee app?

How do I change my username/email address registered to my ecobee…

1. Select the account icon in the top right corner.
2. Select “My Account.”
3. Select “Unregister Thermostat” from the menu on the left. Select all of the thermostats you wish to unregister, then select “Unregister” in the bottom right corner. Featured Topics.

How do I contact ecobee?

Need to talk?

1. Contact Us. Send us a message.
2. Toll Free. 1-877-932-6233.
3. International. 1-647-428-2220. Security team. If you’re a security researcher, please use our public PGP key when sending us sensitive information. We take security very seriously and investigate all reported vulnerabilities. Email: [email protected].

How do I connect my thermostat to WIFI?

Sign in to your Wi-Fi network

1. Press the thermostat ring to bring up the Quick View menu.
2. Select Settings .
3. Turn the ring and Select Network.
4. Select the new Wi-Fi network name and enter the new password. It may take a few moments for your network to appear.