How Do I Reconnect The August Bridge?

August Connect is Offline

  1. Unplug the device from the outlet.
  2. Plug the Connect back into the outlet.
  3. Hold the reset button for 5 seconds, and release.

How do I reset my August WIFI Bridge?

To perform a hard reset on your Connect, leave the device plugged in and hold the reset button down for 5 seconds, then let go. You should see a pulsating green light, which indicates that the device is back in set up mode. If you want to set up your Connect again, follow these set up instructions.

How do I fix August connect?

Check that your wireless router is plugged in and powered on. Then, connect your Wi-Fi to a computer or other device to ensure it is working properly. Your Wi-Fi name and/or password may have changed. Reset the Connect by holding down the button for 3 seconds and set up again using the August App.

Why does my august lock lose WIFI connection?

As you probably know, the August Wi-Fi Smart Lock does not support the 5GHz Wi-Fi network band, but 2.4GHz. So if your lock keeps losing connection, chances are you have a dual-band router, and it automatically switches between the two bandwidths (5GHz and 2.4GHz).You can do this via your router’s Wi-Fi settings.

How do I connect August to New WIFI?

  1. Setting Up August Connect (Android)
  2. Select Settings.
  3. Select Your Lock in Lock Settings.
  4. Select Set Up August Connect.
  5. Select Begin Scan to Start the Connection Process.
  6. Enter Your Wi-Fi Password.
  7. The Connect is connecting to Your Wi-Fi Network.
  8. Select Done.

Do I need August connect?

Best answer: No. The August Wi-Fi Smart Lock has everything built inside and can connect to the Internet without a Connect Bridge. If you have an August Smart Lock or a Smart Lock Pro (Generation 1, 2, or 3), your smart lock will function locally via Bluetooth connection without a Connect Bridge.

See also  What Is The Difference Between Secure And Secured?

How do I update August Connect firmware?

Open the August App and ensure the phone can connect to the lock over Bluetooth. A firmware popup notification should appear. Select Retry Firmware. When instructed, hold down the Keypad button until you see the firmware progress bar.

Why is my August app not working?

General Troubleshooting Steps
Make sure your phone’s OS is on the latest version and that your lock’s firmware is up to date. Stand near your Smart Lock and open the August App on your phone. Check that you can lock and unlock your door using the August App.

How do I put my August keypad in setup mode?

Once you receive the reset code, push the logo button on the Smart Keypad.
Follow these steps to put your Keypad into setup mode:

  1. Open the August App and go to House Settings.
  2. Select the Keypad to enter Keypad Settings.
  3. Select Disconnect Keypad and then the blue DISCONNECT button.

Does August lock work without wifi?

Do August smart locks work without Wi-Fi? Yes, August smart locks can be operated without Wi-Fi as they can also connect via Bluetooth or Z-Wave. However, you need Wi-Fi if you’re looking to control your lock remotely. If you’re still curious about how the August smart lock works, you want to continue reading.

How can you improve Wi-Fi and Bluetooth signals for August connect?

Connect placement tips

  1. Whenever possible, plug the August Connect into your outlet right-side up. The top and sides of the Connect provide the strongest bluetooth and Wi-Fi signals.
  2. While the location closest to you lock and/our router will usually result in the best signal, this may not always be the case.
See also  What Are Schlage Virtual Keys?

How do you reset a August lock?

Factory reset instructions

  1. On your phone, open the August App and go to the lock circle screen, which is the screen that shows you whether your door is locked or unlocked.
  2. Select the Settings menu (gear icon).
  3. Select the device you wish to reset.
  4. Scroll to factory reset.
  5. Select “Reset Lock”.

How do I setup a wireless bridge?

Here’s how to do it.

  1. Position the bridge. Place the wireless bridge within range of your wireless router’s signal, and also within a cable’s length of your wired devices.
  2. Connect the bridge to your network. If your router supports Wi-Fi Protected Setup, or WPS, setup is easy.
  3. Plug in network devices.

Do I need August connect with HomeKit?

Yes, if you have a compatible Apple bridge within Bluetooth range of your August Smart Lock that is setup to work with HomeKit.PLEASE NOTE: An Apple bridge (i.e.: AppleTV, HomePod, etc.) is required to operate HomeKit remotely for every version of August Smart Lock.

What does August connect Wi-Fi Bridge do?

August Connect is essentially a $50 WiFi bridge for the smart lock, connecting to the device being Bluetooth and then relaying signals to the cloud over the home’s WiFi network. The device plugs directly into an outlet near the smart lock and can be connected to WiFi via the August mobile app.

Will a smart lock work without WiFi?

Smart locks do not require Wi-Fi to work. There are several wireless methods available to connect to a smart lock including Wi-Fi, Bluetooth, Z-Wave, and Zigbee.

See also  Why Are My Google Accounts Linked?

How do you update Yale lock firmware?

Login into your account in Yale View app & go to the preview page. Click the gear icon on the top right corner. Go to Device Info page, click Cloud Upgrade option to check if there is new firmware. If there is, you can update this.

Why is August lock unavailable?

If you are unable to operate the Smart Lock remotely using the App, your Connect Wi-Fi bridge may be offline. This article can help you get your August Connect back online. If you are unable to operate your Smart Lock using the App, we recommend rebooting the device.The lock will flash green.

Why does my august lock beep?

A lock jam is another cause for the morse code sound. If you suspect that your lock is jammed, remove the lock from your door and check for any obstructions preventing the deadbolt from being thrown smoothly.Scroll down and find the option Calibrate Lock. Follow in-app recalibration instructions.

How does the August keypad work?

The keypad connects to the August lock via Bluetooth, which is both simple and straightforward, but also a little time-consuming. As you approach the door, you input your passcode and press the August logo, and after a few moments, the door will unlock.

How do I change my August keypad password?

Open up the August App. Select the house from the keychain.
If you want to update an existing personal entry code, follow the steps above, then:

  1. Select the Entry Code you wish to change.
  2. Enter a new code or update the existing code in the entry code field.
  3. Select the back arrow or save changes.
  4. Select SAVE CHANGES.

Contents

This entry was posted in Smart Lock by Warren Daniel. Bookmark the permalink.
Avatar photo

About Warren Daniel

Warren Daniel is an avid fan of smart devices. He truly enjoys the interconnected lifestyle that these gadgets provide, and he loves to try out all the latest and greatest innovations. Warren is always on the lookout for new ways to improve his life through technology, and he can't wait to see what comes next!