How Do I Reconnect My Simplisafe Keypad?

Press the small, circular button opposite where the power adapter connects. Press one of the buttons on the Keypad. The Keypad should say “Connecting to Base Station.” The Base Station will announce “Keypad added.” You can now replace the battery covers.

https://www.youtube.com/watch?v=eGF_oiExKZw

How do I reset my SimpliSafe Keypad?

Open the “battery door” with a screwdriver and remove the batteries within the battery compartment. Hold on for about 30-45 seconds. Plug the base back into the “wall socket”. Now, “replace” the batteries removed from the base station.

How do I connect my SimpliSafe Keypad to WiFi?

Step 1: Press the “menu” button on your Keypad and enter your 4 digit Master PIN when prompted. Step 2: Navigate to System Settings and select it by pressing the right rocker. Step 3: Navigate to WiFi and select it. After a few moments, your Keypad will display a list of available networks.

How do I activate my SimpliSafe keyboard?

The Keypad screen will display, “Welcome to SimpliSafe.” Remove the liner from the adhesive strips attached to the Keypad’s bracket, and adhere it to the wall. Press and hold the Keypad to the wall for 30 seconds to ensure that it is firmly attached to the wall.

Why is my SimpliSafe keypad not working?

Either unplug the base station and bring it closer to the keypad, or slide the keypad off its bracket and bring it closer to the base station. Try to arm the system through your keypad, and see if it works. If it does, try moving your base station to a slightly closer location to your keypad.

Why is my SimpliSafe app not connecting?

Troubleshooting steps: Ensure your phone is connected to the internet. Close the app and reopen it. Try changing the system’s alarm state again.

How do I get my SimpliSafe sensor back online?

Sensor Not Responding Warning (Original SimpliSafe)

1. Press “menu” on the Keypad, and enter your Master PIN.
2. Press “5” on the Keypad. You should see “5. Test”.
3. Press the “away” button to select the “5. Test” option. You should hear the Base Station announce that it is entering Test Mode.

How do I open my SimpliSafe key fob?

Keychain Remote:

1. Take the cap off the end opposite to the keyring.
2. On the long side opposite from the button, slide that piece away from the keyring, this will expose the Keychain Remote’s CR-1632 Lithium 3V battery, which can then be replaced.

How do I reconnect my SimpliSafe camera to a new WiFi?

Click the gear icon at the top right of the screen to bring up your currently installed cameras. Select the camera you would like to update and that camera’s settings will slide on screen. Click WiFi Network and it will ask you for the name of the new WiFi network you would like to choose.

Does SimpliSafe original connect to WiFi?

No. Everything you need to set up the SimpliSafe Home Security System is included.However, the SimpliCam and Video Doorbell Pro do require WIFI and access to the SimpliSafe app through either Google Play Store or the iOS App Store.

Does SimpliSafe run on WiFi?

You do not need a computer or WIFI for SimpliSafe to work for your basic home security needs. However, WIFI and access to the SimpliSafe app through either Google Play Store or the App Store for iOS users is required for the SimpliCam or Video Doorbell Pro.

Why is my SimpliSafe keypad flashing?

The blue light flashing visually prompts you to check your Keypad for warning details. One example is the flashing when your doors or windows are open. While the Base Station chimes once to alert you of an opening door or window, the flashing is continuous when that window or door remains open.

How do I know my SimpliSafe is activated?

Monitoring can be activated via your web browser or SimpliSafe mobile app.
If this is the first product you’ve set up with us:

1. Log in to your account on the SimpliSafe App.
2. Click the “Activate monitoring” button in the center of the screen.
3. Follow the directions on the screen to activate your monitoring service.

How do I reset my Simplisafe Smart Lock?

Reboot

1. Disconnect the power cord from the Simplisafe base station and a power socket.
2. After flipping the Simplisafe base station upside down, open the battery compartment.
3. Remove the battery from the base station.
4. After a short interval, place the battery back in the battery compartment of the Simplisafe base station.

How do I connect my SimpliSafe app?

Getting Set Up
In the app, you should be greeted with a couple of options right on the home screen. Select Set Up a Security System. Select Scan QR Code to use your phone’s camera to scan the QR code on the bottom of your Base Station—or select Enter serial number manually to type it in yourself. Select a plan.

Where is the reset button on SimpliSafe doorbell?

Plug in an Android charger to the camera system. Right above the charger shot, you will see a massive Reset button. Hold the Reset button using a paper clip or a safety pin for about 20 seconds until the LED color changes to yellow.

How do I set up SimpliSafe?

How to install SimpliSafe

1. Set up the base station. Take out the base station box and unpack it.
2. Set up the SimpliSafe keypad. Unpack the keypad box and peel off the film protecting the screen.
3. Install the keypad.
4. Install your sensors and devices.
5. Finish up.

Why is SimpliSafe sensor offline?

The battery or batteries in the device issuing the error need to be replaced. The device is too far away from your Base Station and is unable to communicate from its current location.

How do I reset my SimpliSafe sensor?

How to Reset My SimpliSafe Base Station

1. Unplug your base station.
2. Remove the battery cover at the bottom of the device using a screwdriver.
3. Remove the battery for 10 to 15 seconds before putting the battery back in.
4. Put the cover back on the device.

How do I sync my SimpliSafe sensor?

In the top right hand, section click on the Add Device button. In the pop-up window that appears select the device type, serial number, and optionally give the device a nickname. Select Save and the Base Station announce “Your Settings Have Been Synchronized” to confirm the changes were saved.

What is the panic button on the Simplisafe key fob?

Our Key Fob works just like your car’s. You can arm and disarm your whole home with the push of a button—from up to 30′ away. With a monitoring plan, you can press the Panic Button to alert our monitoring center immediately if there’s an emergency.