The first two digits are the ending two digits of the ‘Year’ and the last two digits are the two digit ‘Week’ of that particular ‘Year’. Example: usually the part number is written or stamped or etched into the product and there may be a space and then four other digits are showing; such as part number: LSA1A 1925.
How old is my Honeywell thermostat?
Every product is date coded with a year and date. This can be found on the printed circuit board. If there are two stamped date codes, the latest date code applies. There is a letter which represents the year and a three digit number which identifies the day.
What is the Honeywell device CRC?
The MAC ID and MAC CRC represent the alphanumeric code displayed on the thermostat screen during the registration process. It is also located on the thermostat registration card inside the thermostat packaging. You can also find it on the back of the thermostat simply by taking the thermostat off the wall plate.
Where is the MAC ID and MAC CRC located?
The MAC ID and MAC CRC is the alphanumeric code located on the bottom of the Gateway device as well as on the back of the Operating Manual.
How do I read my Honeywell serial number?
Serial Number 11256D0521: 11 = Year 2011. 256 = day 256th of year = September the 13th.
Where the Year code (which represents the year where the device has been manufactured) can be:
- A=1985.
- B=1986.
- C=1987.
- D=1988.
- E=1989.
- F=1990.
- G=1991.
- H=1992.
How do I tell what model Honeywell thermostat I have?
The fastest way to see your thermostat model number is to look for it on your thermostat ID card. If you do not have a product ID card, the fastest way to find the model number is by removing the thermostat from the wall-plate.
Where is the CRC on my Honeywell thermostat?
For most thermostats, the CRC and MAC ID are located on the back of the detachable face plate. For RedLINK products, they are located on the RedLINK Internet Gateway.
What does Wake mean on a Honeywell thermostat?
The WAKE period on your Honeywell sets the temperature for the period of the day you plan on being awake. This is usually set to a default of 6:00 a.m. SLEEP is the designated setting for the period you plan on being in bed, and it is usually set at a default of 10:00 pm.
How do I reset my Honeywell thermostat?
To reset your Honeywell Thermostat, switch it off, remove the batteries, and put them back in reverse polarity: negative terminals facing positive. After 5 seconds, reinsert them the right way.
What is Honeywell MAC ID?
A Honeywell MAC Address is a 12-digit code of numbers and letters that identifies the associated device on an IP network.This code identifies the device on an IP network. Honeywell devices that can connect to the internet are no exception. Each device will have its own MAC address.
Where is the MAC address on a thermostat?
Press the thermostat’s ring to bring up the Quick View menu. Turn the ring to scroll to Settings and press the ring to select. Select Technical Info, then Network. Scroll down to find your thermostat’s MAC address.
How do I reset my Honeywell thermostat th4110d1007?
To reset your thermostat’s scheduling, simply hold down both the “SET” and “RUN” buttons for a few seconds to reset the unit to the default settings a cost-effective heating and cooling schedule suggested by EnergyStar.
Why Does My Honeywell thermostat say leave?
Leave is the time period you can set for an energy-saving temperature while you are away at work or school. (This will be a lower temperature during heating season, and a higher temperature during cooling season.) Return is the time the thermostat turns on the heating/cooling equipment after an energy saving period.
How do I check my Honeywell warranty?
Access / Register account here. Click ‘Warranties‘ > ‘Warranty Status’ Input Printer’s serial number. Click ‘Validate’
Can you replace Honeywell thermostat?
You can replace an old analog thermostat. You’re presumably replacing your old dial-type Honeywell thermostat with a programmable or smart thermostat.Of course, your heating system may have needs that only specific types of thermostats can address, so do your homework before you buy.
Where is Nest thermostat serial number?
On the bottom of the box, you will find a code following S/N: this is the serial number. On the back of the Nest display (this requires removing the display from the base if already installed). In the Nest Thermostat app, under Settings (only if the unit has already been added to the app).
How do I turn off the Wake on my Honeywell thermostat?
A temporary hold on your Honeywell thermostat allows you to maintain one temperature setting until the scheduled time period (Wake, Sleep, Leave, Return). If you want to remove the temporary hold, press ‘Cancel’ and then press ‘Hold’ to permanently adjust the temperature.
What is sleep mode on thermostat?
Sleep Mode – The sleep mode regulates the temperature so as to keep you comfortable through the different stages of your sleep. Power Saver Mode – This mode saves electricity and turns off the compressor when the temperature is reached in the thermostat.
Why is cool on flashing on my thermostat?
Check the thermostat’s display to confirm that there’s a call for cooling, usually indicated by the words “cool on” or a snowflake icon. If the “cool on” or the snowflake icon is flashing, the thermostat is in delay mode, which can take up to 5 minutes. This delay is to protect your equipment from short cycling. 3.
How do you manually reset a thermostat?
Here are the step-by-step reset instructions:
- Turn your thermostat off by switching it to the off position.
- Find the breaker that powers your HVAC system and turn it off.
- Wait 30 seconds and turn the breaker back on.
- Turn your thermostat back on.
Locate the reset button on the furnace and press it to reset the furnace. It is usually located inside the blower compartment on the side of the blower motor. Be cautious as the housing may be hot. If the button is popped up, press it down.
Contents