How Do I Pair My Shade Store Remote?

How do I reset my shade store hub?

For assistance, email us at [email protected] or call 800.754. 1455. RED LED – SOLID / NO BLINKING Factory Reset Started 1. Press the reset button labeled “R” with the end of a paper clip for 10 seconds.

How do you charge Shade Store motorized shades?

A battery motor can be recharged using a standard outlet, and charges in 6-8 hours. Since the battery serves as the power source, window treatments with a battery motor do not need to be located near an outlet. In addition, a battery motor will continue to function even if a power outage occurs.

How do you reset Bali motorized blinds?

Press and hold the UP and DOWN buttons at the same time for 3 seconds. When the remote LED turns amber, release both buttons. The shade will jog. This means you’ve set your new lower limit.

How do you install a connector bridge?

Open your Google home application to setup the app for the Connector bridge, tap Settings and then Services tab and then Explore. You can then search for the Connector app and install it, once installed you will have to link your Connector account with your Google account by agreeing to allow permission when prompted.

How long does it take to charge motorized shades?

Connect the AC Charger to the Charger Cable attached to the motor head – charge for 8 hours.

How long does it take to charge roller shades?

Recharging this battery is simple. When the shades stop working, take the battery charger and locate the rechargeable battery port. Plug-in the charger on the wall outlet and attach the other end to the shade charging port. It will take a maximum 6 hours for a full charge.

How do you reset battery operated blinds?

Unplug battery wand. Press the manual button for a few seconds, then plug the wand back in, then press and release the manual button. If the shade responds, no further action is needed. If shade does NOT respond, reset motor with a 6-second reset.

Why is my Hunter Douglas remote not working?

Press and hold the STOP button on the remote for about six seconds or until the remote stops blinking. Perform a six-second calibration reset again, and allow the product to move through its limits and then stop.

Where is program button on Bali blinds?

The program button on the shade’s headrail or motor end lets you move your shade without a remote. It’s also used to perform various programming functions, discussed later in this manual. Pull out the paper strip on the back of the remote.

Can you manually operate motorized blinds?

After the installation, the simplest way to control motorized shades is to provide a wireless hand-held remote that can operate and switch between 4 or 5 windows in the room. A step up from there would be to install a keypad in the wall, which lets you have some presets and a permanent mounting place for the control.

How do you connect Bali blinds to Smartthings?

Bali Blinds & Smart things

1. Press & hold button on blinds until it turns orange to reset.
2. Add device through smarthings app (using scan nearby)
3. Press & hold button on blinds until it starts blinking green.
4. Wait for light to turn solid green – this never happens. It just stops blinking after about 30s.

How long do batteries last in motorized shades?

A – Battery life isn’t guaranteed as it will vary depending upon how large your window covering is and how often you use it, but should last from 12-18 months in optimal usage conditions.

How do remote control blinds work?

Rather than being connected to a string, motorized blinds have a tube installed up top that lifts the shade up. The battery fits above that and connects to a motor for power. If you’re concerned about the look of your motorized blinds, batteries are the most elegant option, as their placement makes them unnoticeable.