How do I put SmartThings hub in pairing mode?
Set up your SmartThings hub, SmartThings Wifi, or Connect Home
- Open the SmartThings app, tap the Devices tab, and then tap Add (the plus sign).
- Tap the By brand tab, tap Samsung, and tap Wi-Fi/Hub.
- Tap SmartThings Hub (IM6001-V3P).
- To complete the setup, review the on-screen instructions on your phone.
Why is my SmartThings hub not connecting?
If the LED is blinking or solid blue, the hub may not have a stable internet connection. Reboot the router or modem. If the LED is blinking red and green, the hub is ready to be set up in the SmartThings app. Otherwise, you may need to factory reset your hub.
How do I reset my Samsung Smartthings hub?
How to Factory Reset a SmartThings Hub v3
- Step 1: Unplug the Hub.
- Step 2: While Holding Down the Reset Button, Plug in the Power Cable.
- Step 3: Keep Holding Down the Reset Button Until the Light Flashes Yellow.
- Step 4: Release the Button After 30 Seconds.
- Step 5: Wait 4-5 Minutes for the Light to Flash Red and Green.
How do I connect my Samsung TV to Smartthings?
Connect your TV
First, turn on the Smart TV you want to connect. Then, on your phone, open the SmartThings app. Tap the Device tab, tap the Home icon, and then select the location where you’d like to add the TV. Tap Add (the plus sign), and then tap Add device.
How do I reset my Samsung wireless hub?
Reset SmartThings Hub 2018
- Power off and reset the hub. First, power off the hub by unplugging the power cable from the back of the hub.
- Wait for the hub to reset. The hub will take 10 to 15 minutes to perform a full factory reset.
How do I reconnect my SmartThings device?
If you have a newer SmartThings device, the sticker on the back of the device will say Samsung SmartThings. Press and hold the Connect button for 5 seconds, and then release the button when the LED light starts blinking red. When the LED is blinking red and green, the device is ready to connect to the SmartThings Hub.
Why is SmartThings not working?
Delete and add the device again on the SmartThings app.
Steps may vary depending on the SmartThings app and device type. Visit SmartThings support to learn how to delete and add a device again on the app. If there’s an issue adding the device again, reset the device.
How do I transfer SmartThings hub?
Migrate Your SmartThings Setup to Hub v2 in SmartThings Classic
- Select the desired location. Open the SmartThings Classic app on your phone.
- Remove all SmartApps.
- Remove all Routines.
- Remove all Devices.
- Delete the Hub’s Location.
- Unplug the Hub.
- Add a New Location and Activate the Hub.
- Connect Devices.
Is my Samsung Smart TV compatible with SmartThings?
The SmartThings app is compatible with phones running Android 7 or higher, and iOS 12.0 or higher. Compatible Samsung TVs include 2016, 2017, 2018, 2019, 2020, and 2021 models.
Do Samsung TVs have SmartThings hub built in?
Samsung just announced that its entire lineup of smart TVs will be SmartThings-ready in 2016. Better yet, every one of its premium SUHD TVs will also feature IoT hub technology that Samsung developed with SmartThings after its purchase in 2014.
How do I reset my Samsung Smartthings camera?
To reset the camera, press and hold the Reset button located on the back side of the camera for 15 seconds, and then release it. The camera will make a “click” sound, and then the LED will start blinking green. The camera is ready to connect with SmartThings once the LED starts blinking amber.
Why is my SmartThings hub disconnected?
An issue with the local network is the most common reason for your Hub going offline. A spotty internet connection makes it harder for your Hub to stay connected. The only solution for this is to contact your ISP and get your connection fixed.
What happened to Samsung SmartThings?
Since December 2020, the Samsung SmartThings Hub v3 has become the Aeotec Smart Home Hub. It still runs the SmartThings software and SmartThings app. It is still compatible with all the devices and automations you’ve come to expect. The only change is that the hardware is now built by smart home specialist Aeotec.
Why is my Samsung TV not working with Smartthings?
Reset the Hub and other devices.
Reset the hub, and then readd it to SmartThings. After the hub is added, close and then reopen the SmartThings app. The app will check for firmware updates to the hub. Reset any device(s) that were previously connected, and then readd them.
How do I setup my SmartThings camera?
Set up the Cam in the SmartThings app
Tap Add (the plus sign), and then tap Device. Tap By device type, then tap Camera under Devices/sensors, and then tap SmartThings. Select your camera, then tap Start, and then view the on-screen prompts. Using your phone, scan the QR code as prompted.
How do I update SmartThings hub WIFI?
Select your Wifi hub’s name from the list of devices. Tap Use SmartThings hub, and then tap MANAGE SMARTTHINGS HUB. Under Device firmware updates, tap the arrow button, and then tap Allow, Allow except lightbulbs, or Do not allow. Tap Allow to allow updates for all of your connected devices.
What is replacing SmartThings hub?
SmartThings is here to stay as an app and control system, but Samsung is moving away from making its own hardware, including the native hub. Instead, the Aeotec Smart Home Hub is the preferred SmartThings base for anyone that wants to directly connect Z-Wave and Zigbee devices.
How do I migrate to new SmartThings app?
Open the SmartThings Classic app on your iPhone, iPad, or Android device. At the top of the screen, tap the Migrate This Location Now banner. Next, the app will explain the migration process through a few slides. Swipe from the right to read the slides and then tap Migrate Now when finished.
Do I need to replace my SmartThings hub?
Samsung said this week that the original Hub, which arrived back in 2013, will be retired after June 30, 2021. After this date the Hub will no longer function properly. Instead, it will only allow SmartThings users to see devices that are connected to their system, but not control them.
Contents