How Do I Pair My Gosund Bulbs?

Why is my smart light not connecting?

I am having trouble connecting my Smart Light to Wi-Fi.
Make sure the Wi-Fi network is a 2.4 GHz network. The Smart Wi-Fi Light will not connect to a 5 GHz network. If your Smart Wi-Fi Light is already on the right frequency, make sure that your phone is not using a VPN app in the background.

Why is my light bulb not connecting?

Check the light bulb first to see if it has burned out. If so, replace the bulb. Check to see if the bulb is tight in the socket.With the power shut off, check the wire connections at the light fixture and at the breaker panel to make sure they are all connected tightly.

How do I reset my SmartThings bulb?

Manually turn the light bulb’s fixture (such as the switch on a lamp or wall) on and off six times in intervals of 0.5 to 2 seconds. After the sixth time, the bulb will flash twice, indicating that it’s successfully reset. After the reset, add the Smart Bulb back to the SmartThings app.

Why are my LED lights not connecting?

Bad Pin Connection – If your LED strip light fails to turn on at all, then check your pin connections. Most likely, the pin is not inserted correctly. In rare cases, the pin is faulty. These tiny connectors are rather delicate items so you have to be very careful when inserting them.

How do I connect my Gosund to Google home?

Connecting to Google Assistant

1. Launch the Google Home app.
2. Tap the + button at the top left corner of the app.
3. Select Set up device > Works with Google.
4. Select Gosund from the manufacturer list.
5. Follow the app’s instructions to complete the setup.

Why is my tube light not working?

If a fluorescent tube neither lights nor flickers when switched on, first check to see that the fixture is plugged in and that no fuse has blown or circuit breaker has tripped. If this does not help, try wiggling the tube gently in its sockets by rocking it back and forth and from side to side.

How do you get a light bulb to work again?

Keep gently twisting anticlockwise until the bulb comes loose from the socket.

1. Replace the bulb. Insert a replacement bulb lightly but firmly into the socket.
2. Restore power. Once the bulb is in, turn the power back on again and switch on the light.
3. Dispose of the old bulb.

How do you make a light bulb not work?

That is to say, “the bulb has blown” or “the light has blown”. I would also usually include a location, such as “the kitchen light has blown”. The same goes for pretty much anything electronic, such as “the fuse has blown” or “the kettle has blown”.

How do I sync my LED lights to my phone?

How to Use Smart LED Strip Lights with EZ Mode

1. Step 1: Download LampUX App. Android and iOS users can go to the App store and download LampUX App on your phone, then register an account.
2. Step 2: Set Up the Smart LED Light Strip. Turn on the LED strip lights and wait for 10 seconds.
3. Step 3: Connect the App.

Why won’t my LED lights connect to Bluetooth?

Try to reset the light strip. Reset: Press the middle button on the control box for four times while holding the power button.Please try to unplug the light strip for 10 mins, then re-plug it.

Can Smart Bulbs be programmed?

With the integration of Wi-Fi, Bluetooth, ZigBee or a proprietary connection for a home automation systems, smart bulbs can be controlled through a mobile app or a home/building automation hub and individual bulbs can be programmed to change output in a specific manner.

How do I reset my Gosund WiFi light?

To reset your Gosund smart plug you need to hold the power button on your smart device for around 10 seconds. After 10 seconds you’ll notice a green light flash on the indicator and your smart plug will reset.