How Do I Manually Use My Hive Thermostat?

Can you operate hive manually?

The Hive Active Heating 2 thermostat has been designed to be easy to use.You can use your Hive thermostat to control your heating and hot water manually when at home.

Can you manually override hive?

Hive Active Plug – Your plug will continue to work. Until your broadband connection is restored you can control your plug, whether it is on or off, manually from the plug itself.Until your broadband connection is restored you can control your light, whether it is on or off, manually from the light switch itself.

How do you override a hive thermostat?

To reset the thermostat, hold the thermostat in your hand with the back facing you. Hold down the ‘+’ and ‘-‘ buttons on the front of the thermostat at the same time. Keep a hold of those buttons while putting the battery back in and keep holding them in until the word ‘FIND’ appears on the screen.

How do I use Hive thermostat without Internet?

If the heat or the hub is disconnected from the Internet, the Hive application will show you and tell you what is wrong. Yes, your thermostat will continue to function on its pre-set schedule if not connected to WiFi.

Can you use hive thermostat without a hub?

For Hive Active Heating a hub, a receiver and a thermostat are installed. When this service hasn’t been bought, the thermostat and receiver can also be installed without a hub. This is known as ‘stand-alone’ mode.

How can I boost my hive manually?

To boost the heating, follow the below steps:

1. Press the Heating Boost button on top of the thermostat to turn the heating on for 1 hour.
2. Press the Heating Boost button again to increase the length of your Boost.
3. Turn the dial to change the Boost temperature (it’s set to 22? by default).

Does Hive have to be plugged into router?

Our newest hub, Hive Hub 360 connects via Wi-Fi, our other hubs need to be physically connected to your broadband router using a network cable (provided with the hub) to allow you to control your Hive products remotely.

Why has my Hive gone offline?

If your Hive Light is showing as offline in your Hive app or website dashboard it could be because it’s been switched off manually from the existing light switch on the wall or lamp.If your wall or lamp light switch is switched to on and you’re still unable to control Hive Light remotely, try restarting your Hive Hub.

Does Hive thermostat use WIFI?

A smart thermostat connects your boiler to your smartphone via the internet. This means you can set, adjust and turn off the heating when you’re at home and when you’re not.

Why is my hive thermostat not working?

Check that your broadband connection is working and that your Hive Hub is showing a green light. 2. Check that your Hive Thermostat is available in your app.Once you have verified the furnace has power, try removing the thermostat body from the wall and check that all the wires are connected securely to the terminals.

Is there a monthly charge for Hive heating?

You must pay your first monthly payment under the payment plan at the point of purchase. If you buy any additional Hive product(s) at the same time as taking out a Heating Plan, you must pay for such products at the point of purchase.

How much bandwidth does Hive use?

Your Hive View or Hive View Outdoor requires a minimum of 1.5Mbps. If you have low bandwidth on your network this could impact either the performance of the camera or the performance of other devices connected to the same network.

Why is green light flashing on Hive receiver?

Flashing Fast Green = Hub is trying to connect to the internet. Flashing Slow Green = Hub is trying to connect to the Hive servers or is in upgrade mode. Wait for 20 minutes and refresh your Hive app. If your hub is still offline then please follow the steps below.

How much does Hive cost per month UK?

The Hive monthly cost is an ongoing subscription called Hive Live and costs ?2.99 a month which offers Hive customers an ongoing warranty on all their Hive products.

How do I calibrate my hive thermostat?

While calibrating
Want to speed up the process? There’s a special calibration cycle available in app version 10.15 onwards. To test that your Hive Radiator Valve is working while it calibrates, use the dial on the front to set it to a high temperature. The valve should open immediately.

What temperature should hive be set at?

Turn the heat down by one degree
Instead, just set it to the lowest comfortable temperature (typically somewhere between 18 and 21 degrees).

How do I set the temperature on my hive thermostat?

On the app, Select Hold in the “System settings” screen. On the web, select the Hold section on the web dashboard. On the thermostat, tap Menu. Then, select whether you want Heat, Cool or Dual and select Set temp.

Does Hive need Ethernet connection?

Hive needs a dedicated ethernet (CAT 5) port and it is supplied with a lead with a CAT 5 plug ready to plug in. As you only have two ports and you are using them both you will need to expand your hardware in order to provide a spare port.

How do I connect my Hive to the Internet?

How do I set up my Hive Hub?

1. Connect the Ethernet cable to one of the open ports on the back of your broadband router, then connect the power supply into a plug socket.
2. You’ll see a solid green light on the hub which will then start to flash.

How do I connect my Hive to my WIFI?

Log into the Hive app and tap your Hive Leak Sensor. When viewing the product page, tap the settings icon on the top right and then tap ‘Change Wi-Fi‘. You will be guided through steps to connect to your new network.