How Do I Make Obs Lighter?

10 Ways to Fix the OBS CPU Usage too High

1. Downscale your output resolution.
2. Use your Graphics Card for Encoding.
3. Lower Frame Rate.
4. Change your x264 preset.
5. Check your sources.
6. Close Extra Applications.
7. Run all audio sources at the same frequency.
8. Free Disk Space.

How do I lighten in OBS?

Right-click on the source->Filters. Add a Color Correction filter. Adjust to taste.

How do I make OBS use less?

Here are some ways you can reduce resource utilization and, hopefully, make both OBS and your programs run faster while encoding:

1. Downscale your output resolution.
2. Lower your frame rate.
3. Change your x264 preset.
4. Try Quicksync, AMF, or NVENC.
5. Check your sources.
6. Upgrade your hardware.

Is OBS good for low end PC?

If you don’t have thousands of dollars to throw at a powerful streaming setup don’t worry. You can still have a great quality stream even with a low end PC.

How do I make OBS use less GPU?

GPU Overload Issues

1. Quick Fix: Run OBS as Administrator (Windows-only)
2. Check for Other Programs Using the GPU.
3. Limit the Game Framerate.
4. Reduce the Game’s Graphical Settings.
5. Disable Game Capture Multi-Adapter Compatibility (Windows-only)
6. Disable Windows Gaming Features (Windows-only)
7. Build Simpler Scenes. Reduce Filters.

Why is my OBS recording so bright?

Monitors tend to be too bright, and you might have adjusted the game to appear a bit darker. Instead of doing this, reduce brightness of your monitor. In fact, reduce the contrast and not the brightness. With brightness, you actually set the darkness level, and with contrast, you actually set the brightness level.

How do I brighten a streaming video?

Check out these tips and products to help brighten up your video productions:

1. Avoid windows behind the subject.
2. Try a small on-camera light for on-the-go shoots.
3. Try a ring light to brighten from multiple angles.
4. Invest in a studio light kit to eliminate all shadows.

How do I make my stream not lag?

Q: How to fix stream delay?

1. Choose the low latency mode (in Twitch Studio).
2. Set the stream delay to 0 (in OBS).
3. Improve your Internet connection (use ethernet, upgrade bandwidth, stop unnecessary network usage, or update your network device).
4. Use a hardware encoder (as it is more efficient in encoding).

How do I optimize my OBS for low end PC?

Configure computer and OBS settings
Turn all video settings from your game to their lowest. Reduce recording resolution for OBS to 16:9 720p (1280×720) or 480p (854×480). Use the Bicubic downscale filter. Verify the OBS FPS and reduce them to 24 or 30.

What is B frames in OBS?

B-frames (bi-predictive frames) are like extra Keyframes, but instead of showing up consistently they only show as needed. This is done by looking both at the previous frame, and the upcoming frame, and inserting a new frame as needed.

How much RAM does OBS use?

OBS Studio System Requirements
Compatible with Windows, Mac, and Linux. AMD FX series or Intel i5 2000-series processor (dual or 4-core preferable) or higher. DirectX 10 capable graphics card. At least 4 GB of RAM (recommended, but not necessary)

Will more RAM make OBS run smoother?

No it has nothing to do with RAM,unless you get the same stutters without recording which would mean that the game might need more ram to run smoothly.

Why is OBS overloaded?

If you see the message “Encoding overloaded” in OBS, your CPU is probably choking on the encoding. Consider turning down video settings. By scaling the resolution down, you’re telling OBS to shrink the video before sending it to the encoder, thus putting less pressure on your CPU.

Why does OBS use so much GPU?

GPU usage goes to 20%, because when the PC is idle, the GPU is in powersaving mode. OBS needs a bit of GPU resources even when idle, so it consumes 20% of the small GPU resources that are left in powersaving mode.

What does GPU do in OBS?

The use of a dedicated GPU to carry out multimedia operations results in a noticeable impact on the quality of your streams and the performance of your streaming software. The right OBS settings reduce the load on your CPU resources and enable you to record and stream your videos at the best possible quality.

How do I color correct in OBS?

In this example we will make the sunflower look more like it does in person.

1. Add a video source. Effects filters can be used on any video layer.
2. Select ‘Filters’ Right click on the layer you wish to apply a filter to then select ‘Filters’.
3. Select ‘Color Correction’
4. Edit the color correction values.
5. Done!

How do I add filters to OBS?

You can add them by right-click your desired Scene, Source or Device and selecting “Filters” (for Audio Devices, click on the gear icon next to your device).

Does OBS support HDR?

The capture card can support HDR, but OBS still can’t. So if you have HDR on, your image colors will be corrupted.

Can a dark video be lightened?

The best way to brighten dark videos is to increase the video brightness and contrast levels using a video brightness editor. This basic feature is supported in most free and paid video software tools on your PC, Mac, or smartphone, including tools like Adobe^® Premiere^® Pro and Movavi Video Editor Plus.

How do I lighten a dark video on my computer?

Videoleap (IOS, Android)
To make a dark video brighter, you just need to upload clips to Videoleap and use the “Adjust” tool to increase the exposure by dragging the slider to the right.

How can I lighten a video file?

Windows Movie Maker

1. Go to the official site of Microsoft and then download Windows Movie Maker.
2. Open the application and then drag the video into it.
3. Go to the tab of “Visual Effects” and then click the button of “Brightness”.
4. Drag the bar to adjust the brightness for the video.