How deep do Flicker Shads run?
The larger bill with a steep pitch creates a deeper retrieve than other baits. The Size 7 (2.75 inches) Flicker Minnow can be trolled in the 14- to 17 -foot depth range, depending on line choice and speed, with a dive curve that is unmatched by similar minnow baits.
How fast should you troll a Flicker Shad?
“Flicker Shads are great lures,” Valentine said. “And they troll perfectly straight at four miles per hour. Sure, there are other lures that will work at fast speeds and most lures can be tuned to run that fast.
How deep does a flicker minnow 9d go?
Specs: Model: FFMN9D. Running Depth 18′-23′ (5.5-7.0 m)
How deep does a flicker shad 5m dive?
Size 5 – 2 inches. Diving Depth 9-11 feet. The Berkley Flicker Shad crank baits feature a unique rattle and rolling, flicker action which mimics fleeing or injured baitfish. The flicker shad has a built in weight transfer system that helps produce bullet like casts.
How fast do you troll flicker minnows?
Speeds of 2.5-3.0 mph, around 200′ back would get it down in the 15-18 foot range. Re-hooking them like I do to the Flicker shads dramatically increases the catch rate. What speeds do you need to reach those depths when trolling? precision trolling says speeds do not effect depth of a diving crank bait.
How long is size 9 flicker minnow?
The Berkley Flicker Minnow body design, in combination with its impressive dive curve, get you to the fish quicker. Berkley Size 9 Flicker Minnows will dive from 18 to 23 feet. The size 9 Flicker Minnows are 3 1/2 inches long.
What size hooks are on Flicker minnow 7?
Body Length: 3″ (7.0 cm) Weight: 1/4 oz (7.2 g) Hook Size: #8 (2-Treble Hooks)
How far behind the boat should I troll?
Every boat is different and you should make your boat your own study. Proper distance for most boats will be anywhere from 20 feet to 150 feet behind your boat. Whether you have inboard diesel or outboard gas engines, your power dictates the distance you troll your baits and lures.
How can I make my lures deeper?
If you need to go deeper, just let out some backing until your target depth is reached. On the lure end of the line, remove a short section of lead as before and tie on a size 18, or smaller, barrel swivel. Now use a 10 to 15 foot mono or fluorocarbon leader to tie on the lure.
How do you control crankbait depth?
Move your crankbait too slow or too fast and it’ll run too shallow. The bill has to bite into the water at the correct angle for the lure to run as deep as possible. The length of your cast is the next thing that affects running depth. A longer cast will let the bait get down deeper.
How long is a #7 flicker shad?
Size 7 – 3 inches. Diving Depth 11-13 feet. The Berkley Flicker Shad crank baits feature a unique rattle and rolling, flicker action which mimics fleeing or injured baitfish. The flicker shad has a built in weight transfer system that helps produce bullet like casts.
How much is the precision trolling app?
The LifeTime purchase option costs $109.99 and includes all the data currently available from Precision Trolling Data, LLC and all subsequent freshwater data to be published in the future. Downloading the PTD app to your phone is a simple process.
How long is a #5 flicker shad?
Specs:
Size | Length | Running Depth |
---|---|---|
5 | 2in (5cm) | 9′-11′ |
6 | 2.25in (6cm) | 10′-12′ |
7 | 2.75in (7cm) | 11′-13′ |
9 | 3.5in (9cm) | 11′-13′ |
Can you cast Flicker Shad?
The Flicker Shad has a weight transfer design that allows for long casts. It is an efficient diver. The 3/16-ounce model dives to 9-11 feet when cast on 10-pound test monofilament line.- Best tackle for casting is a long medium-action spinning rod and 6- to 10-pound test fluorocarbon.
What’s a good trolling speed?
So, what is the best trolling speed? The best trolling speed depends on several factors including the type of fish, water conditions and lure choice. In general, trolling speeds between 1.5 and 2.5 mph, as measured by GPS, are a good starting place for most species like walleye, trout and salmon.
How fast do you troll crankbaits?
Changing speeds is key
Typical crankbait trolling speeds are 1.5 – 3 mph, and there are times when it makes a big difference. If you are marking bait and fish but not hooking up, don’t be afraid to speed up or slow down. Making “S” turns is also a good way to test several speeds at once.
How fast do you troll crawler harnesses?
The best trolling speed for fishing with a crawler harness is from 1 to 1.4 mph. This is significantly slower than most other baits used in the summer, and the reason for this is that you don’t want to rip off your nightcrawler from the harness by trolling at high speeds.
What hooks are on the flicker minnows?
Use the size #6 for the #7 and #6 Flicker Shads. Use the size #8 for the #5 Flicker Shads. Gotta love these baits, in spite of the original hooks being a bit brittle.
Contents