How Do I Make My Ezviz Camera Offline?

How to re-configure an offline device?

1. You do not need to delete the cameras from the EZVIZ app.
2. Go to the Device Setting page, tap “Wi-Fi”
3. Follow the instruction to reset the device.
4. Doing the Setup process again will override the previous Wi-Fi setup.

Why does my Ezviz camera say offline?

How to deal with the system message “Device is offline”? 1) Check the indicator lights on the device; ensure that the device is in configuration mode. 2) Ensure that your router is functional and can go online to the internet and ensure that you do not have multiple devices on your network.

How do I reset my camera offline?

A) Power off the camera (unplug the camera, or hold the button down for 5 seconds until the lights turn off; press it to turn it back on after about 1 minute.) 3. If the camera is still offline, you can factory reset your camera.

How do I turn off my Ezviz camera?

Follow the steps below to delete the camera from your EZVIZ account using your mobile app.

1. Log into the EZVIZ account.
2. Tap on the image of the camera to open the “live view” page.
3. From the top right corner, tap on the “gear icon image” to open the device settings page.

Can I use a WiFi camera without internet?

Wireless security cameras don’t necessarily require the internet. Rather, there are a number of security cameras that can record their footage locally onto micro-SD cards or hard drives so it can be viewed later.

Why does my security camera go offline?

Security cameras go offline for three main reasons: power outages, loss of internet, or failure of the camera’s components (broken parts or wires).

Why is my EZVIZ camera not working?

How to reset the EZVIZ security camera? Hold the reset button for 5-10 secs; wait for the prompt informing you that the device has been reset successfully. Some cameras will not give you the prompt; however wait for 1-2 mins for the indicator lights to flash blue. Generally, reset takes about 1-2 mins.

How do I set up my EZVIZ camera?

1. Login the EZVIZ account which you have registered.
2. Press the “+” sign to begin the process of adding your device.
3. From the device sticker located on the back/bottom of the camera scan the QR code or manually input the serial number of the device.
4. Follow the wizard to add your device to your EZVIZ account.

Why is my camera not connecting to WiFi?

Forget all WiFi networks, restart your phone/tablet, then reconnect to your 2.4 GHz network. On iOS: In the Settings app, tap General > Reset > Reset Network Settings. On Android: In the Settings app, tap General management or System, tap Reset or Reset Options > Reset Network Settings. Confirm the reset.

What is the default password for EZVIZ camera?

12345
Step1: Log in the camera, the User Name is ‘admin’, the Password is ‘12345‘ by default.

How do I unbind my EZVIZ WIFI camera?

Unbind Device from Its Original Account

1. Add the device by scanning QR code or Hik-Connect domain.
2. On the Result page, tap Unbind Device to start unbind the device from its account.
3. Optional: If the network exception occurs, perform the following operations.

How do I unlock my EZVIZ camera?

1) Click the “Forgot Password” in login page at EZVIZ mobile app. 2) Enter the user mobile phone number or email address/username, depending on the method the account was registered. 3) A 4-digit verification code will be sent to the user to input and complete his/her password change or recovery.

How can I use IP camera without internet?

Step 1: Connect an Ethernet cable from the Ethernet port of the camera to the router. Then, connect an Ethernet cable from the computer directly to the same router. Make sure the router and camera are turned on. Step 2: Open the Amcrest IP Config tool and allow the software to locate the IP address for your camera.

How can I use IP camera without router?

Connect IP Cameras to Computers without Routers

1. Get Your Computers & IP Cameras Charged.
2. Connect IP Cameras to Computers with Network Cables.
3. Find out the IP Address of Security Cameras without Routers.
4. Change Your Computer’s IP Address in Sync with the Prefix of IP Cameras.

Do any security cameras work without internet?

There are wireless cameras that can work without Wi-Fi. The Arlo Go and the Reolink Go, for example, are both wireless cameras that use cellular data plans instead of Wi-Fi.

Why does my security camera go offline at night?

The camera has the IRCUT automatic switchover; this allows the camera to switch to Night vision automatically when it gets dark. This sounds like the camera’s night vision mode is not able to function; this can happen if the camera is not getting sufficient power or if the hardware is faulty.

How do I reset my EZVIZ camera?

How to reset the EZVIZ security camera? Hold the reset button for 5-10 secs; wait for the prompt informing you that the device has been reset successfully. Some cameras will not give you the prompt; however wait for 1-2 mins for the indicator lights to flash blue. Generally, reset takes about 1-2 mins.

Do EZVIZ cameras record all the time?

Download the PC application, “EZVIZ Studio”. Login into the account, go to device advanced settings, Click “Event-Schedule-Recording Schedule” and choose all-day recording template.

Is the EZVIZ camera wireless?

EZVIZ Security Camera: Indoor, Outdoor, 2K, WiFi Cameras. The d?cor that protects your home. Smart Wi-Fi Pan & Tilt Camera with 4MP resolution.

How do I transfer my EZVIZ camera to another phone?

How to Share EZVIZ Devices with Friends and Family?

1. Log into the EZVIZ mobile app.
2. Select the camera you wish to share > then from the top right corner, tap on the share icon.
3. Follow the prompt > input the customer’s valid email/phone number registered with EZVIZ.
4. Click on “OK” to complete the settings.

How do I use the EZVIZ camera app?

For Android mobile phones, go to Google ‘Play Store’. Search for “EZVIZ” app.
Support

1. Login the ezviz account which you have registered.
2. Press the “+” sign at top right corner in “Home” page to get to the device addition page.
3. Scan the QR code at the bottom of the device or manually input the serial number of the device.