How Do I Make A Curtain Rod?

https://www.youtube.com/watch?v=0I48VwQ0dyg

https://www.youtube.com/watch?v=0I48VwQ0dyg

What can I use instead of a curtain rod?

copper pipes
Pipe Rods. This one is a pretty common alternative. Many people turn to copper pipes when they need a substitute curtain rod. Copper pipes have a unique look about them which is what draws many folks toward it, but you can use any style of or look of pipe.

How do you hang curtains without a rod?

For stationary curtains, it’s easy to hang them without a rod using upholstery tacks.
5 Creative Ways to Hang Curtains Without Rods

  1. upholstery tacks.
  2. tension cables.
  3. hook-eye screws and drapery pins.
  4. staples and furring strips.
  5. cabinet knobs.

How can I hang curtains without putting holes in the wall?

Renter-Friendly Window Treatments That Don’t Damage Walls

  1. Use Temporary Command Hooks.
  2. Hang Curtains With Tension Rods.
  3. Order Custom Compression Shades.
  4. Make a Faux Roman Shade.
  5. Buy Twist & Fit Curtain Rods.
  6. Suspend Curtain Rods from the Ceiling.

Can you use PVC as a curtain rod?

PVC pipes pair well with wall hooks or drapery rod brackets. If you want to add decorative finials, insert a cork at each end of the hollow tube to help connect screw-in or pushpin finials, for example. To make returns on either side of the curtain, connect PVC elbows at each end to create 90-degree angles to the wall.

What is a PVC flange?

Sch 80 PVC Flanges
Flanges are fittings that connect to pipes to allow the attachment of accessories and other items, stop the flow or increase the strength of the pipe. These discs create a tight seal when pressing two surfaces together using bolts, clamps, edges or a compressive force.

See also  Is Homekit Secure Video Free?

How do you make a curtain rod out of a wooden dowel?

Find and mark the center of one end of the dowel. Drill a 3/16 inch hole one inch deep at the center mark. Use pliers to screw one end of the dowel screw into the dowel, then screw the other dowel onto that. Sand and apply clear finish* to dowel rods.

Can you hang curtains on a wire?

The beauty of hanging curtains with wire as opposed to a fixed rod is that you can put them anywhere. They can surround a window or door like normal, or you might string them between two walls to serve as an attractive partition.

Can you install curtains with a screwdriver?

A handheld screwdriver works well for the last few turns. Once you have your brackets attached to the wall, you’re ready to hang your curtain rod! It’s easiest to thread your curtains on the rod beforehand.

Can you hang curtain rod with command strips?

They can be merely decorative, or they can serve to block out the light. Many landlords don’t allow renters to drill holes into walls, which is necessary for installing curtain rod hooks. Fortunately, it is still possible to install curtain rods with Command hooks.

Can I hang curtains without drilling holes?

Dowels and Sticky Hooks
A slim wooden dowel is a beautifully understated way to hang curtains.And the beauty of using a sticky hook instead of drilling holes in the wall is that if you decide the curtains look too low or too high, you can move the rod and hooks without any damage.

See also  How Do I Make My Pilot Light Stay Lit?

Do you need a stud to hang a curtain rod?

Well, you do NOT need a stud to hang a curtain rod, but you will need a special type of wall anchor to hold the weight. There are two different types I like to use: a drywall anchor or toggle bolts.TIP: If you could have a stud in your wall, use a 1/8? drill bit to check first. You will know if there is wood!

Can you hang curtains without a drill?

Similar to stick on curtain rods, Command hooks are another answer to how to hang curtains without drilling into the wall. In fact, they even make some specifically for this purpose. All you need to do is hang a hook on either side of the window and pop a rod it, and you’re done!

How do you attach Pinials to PVC pipe?

  1. Screw the cork on the finial.
  2. The opening on my PVC pipe is 1-1/4” so I needed to cut another cork in half.
  3. I then hollowed each half out with a nut pick.
  4. Hot glue the cut sides of the cork to the center cork on the finial.
  5. Push it into the end of the PVC pipe.
  6. No one will ever know how you faked it out – except you.

What is the outside diameter of 1 1 4 PVC pipe?

PVC Schedule 40 Sizes Table

Pipe Size Decimal OD Metric OD
1″ 1.315″ 33.40 mm
1-1/4″ 1.660″ 42.16 mm
1-1/2″ 1.900″ 48.26 mm
2″ 2.375” 60.32 mm

What are pipe flanges?

A flange is a method of connecting pipes, valves, pumps and other equipment to form a piping system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or screwed. Flanged joints are made by bolting together two flanges with a gasket between them to provide a seal.

See also  What Could Be A Disadvantage Of Just Using Available Lighting?

What are Van Stone flanges?

Van Stone Flange – This is a two piece flange with a rotating ring that makes bolt alignment simple.This flange has one female threaded end to connect to a male threaded fitting or nipple.

How do you make ready made curtains look custom?

TIPS: How to Hang Curtains to Look like Custom Drapes

  1. When in doubt, go high. I like to hang my rod 6 inches above the window.
  2. Have the rod extend beyond the bracket. I tend to do 2-3?, not including the finial.
  3. Add at least 10? to each side of the window.
  4. Use wide panels.
  5. Skim, kiss or puddle.
  6. Steam.

Contents

This entry was posted in Smart Home by Claire Hampton. Bookmark the permalink.
Avatar photo

About Claire Hampton

Claire Hampton is a lover of smart devices. She has an innate curiosity and love for anything that makes life easier and more efficient. Claire is always on the lookout for the latest and greatest in technology, and loves trying out new gadgets and apps.