How Do I Know What Size Led Lights To Buy?

LEDs/length When buying LED strip lights, it is important to look at the number of LEDs per length. For brighter output and higher light quality, you should look for the strip lights that have the highest number of LEDs per Foot (Meter, Yard, etc).

How do I know what size LED lights to get?

To determine the needed lumens, you will need to multiply your room square footage by your room foot-candle requirement. For example, a 100 square foot living room, which needs 10-20 foot-candles, will need 1,000-2,000 lumens. A 100 square foot dining room, which needs 30-40 foot-candles, will need 3,000-4,000 lumens.

What length should LED lights be?

An LED strip light is typically half an inch (10-12 mm) in width, and up to 16 feet (5 meters) or more in length.

What is 40 watt LED equivalent to?

Compare wattage

Traditional bulb1 Halogen2 LED
40 watts 25 watts 5 watts
60 watts 40 watts 7 watts
75 watts 45 watts 9 watts
100 watts 60 watts 12 watts

What is 5050 LED strip?

The 5050 is an RGB strip whose chips measure 5.0mm by 5.0mm. They have 3 LED diodes in each casing called tri-chips, which gives them a very bright glare when turned on at full power.

How far can you run LED lights?

12V DC LED strip longest length is 16ft (5 metres). 24V DC LED strip longest length is 32ft (10 metres). 24V Constant Current (CC) LED Strip is 65ft (20 meters). 120V LED Strip maximum length is 164ft (50 meters).

How long can 24V LED strip?

If powered from one end only, our 24V LED strip can be run in a maximum length of 10m*.

See also  How Many Times Ccd Consumes More Power Than Cmos Sensor?

How long can a 12V LED strip be?

Wiring and Connecting LED Strips
If your total length needed is over the maximum run length of the strip (32.8 ft. for SD and 16.4 ft. for HD) then you will need to run parallel wires from your power source to the separate strips.

How bright is a 15W LED light?

LED light bulbs for general use around the home will typically have a wattage between 5W-15W, and will emit between 300-500 lumens.

What is 15W LED equivalent to?

LED light bulbs take energy efficiency to another level, using around 40% less energy than CFL equivalents.
LED equivalents to CFL light bulbs.

CFL Light Bulb Wattage LED Equivalent Wattage
15 Watt 9 Watt
9 Watt 5.5 Watt
5 Watt 3 Watt

WHAT LED bulb equals 60 watt?

For example, a 60-watt incandescent light bulb gives approximately 800 lumens; therefore, to replace a 60-watt incandescent bulb with a LED bulb of the same brightness, one should purchase a LED bulb that also gives 800 lumens. A 60-watt incandescent light bulb can be replaced with a 10-watt LED.

Which is brighter LED 5050 or 2835?

What is this? Most 5050 strips are 30 or 60 LEDs per meter because that’s all the space you have. Not so with a smaller chip like 2835, which can quite comfortably fit up to 120 LEDs per meter, which means you can get a much brighter strip – up to 2,600 lumens per meter!

How do I identify my LED chip?

LED chips (also known as surface mounted diodes or SMDs) are all identified by a four-digit number. This code is less complicated than it looks – it simply indicates the size of the LED chip. For example, the dimensions of SMDs on 5050 LED strip lights are 5.0mm x 5.0mm.

See also  Can Christmas Lights Go Bad?

What is the difference between 5050 and 5630 LED lights?

The 5630 (5730) LED is basically a stretched 5050 LED with a much wider viewing angle. Making the 5630 (5730) LED the brightest of all 3 with the lowest power consumption per watts. The wider angle makes it easy to emit a brighter output with the same wattage.

What is the best LED strip lights to buy?

  1. Philips Hue Bluetooth Smart Lightstrip Plus. Best LED Strip Lights.
  2. Wyze Light Strip Pro. Best Budget LED Strip Lights.
  3. Corsair iCUE Lighting Node.
  4. Elgato Light Strip.
  5. Corsair LS100 Smart Lighting Starter Kit.
  6. Govee WiFi TV LED Backlights.
  7. Maxonar Wi-Fi Enabled LED Strip Lights.
  8. Nanoleaf Shapes Hexagon Smarter Kit.

How long can a single LED strip be?

HOW LONG CAN LED LIGHT STRIPS BE? So as a rule of thumb: 12V LED light strips can be up to 5m in length, may can be cut to the required length. 24V LED light strips can be up to 10m long, again many can be cut to length.

Can you wire LED strips in parallel?

The alternative to connecting multiple LED strip sections together is to wire them in “parallel.” This method involves creating independent runs of LED strip sections, each of which are wired directly to the power source.

What is better 12V or 24V LED lights?

24v LED strips draw half the amperage of 12v, so when it comes to control gear 24v is the clear winner. It allows you to power double the amount of LED strips on the same receiver.

See also  What Is A Safety Interlock?

What is the difference between 12vdc and 24vdc?

There is also a difference between wiring for a 12-volt motor versus a 24 volt motor. For example, at 24 volts, smaller wire can be used for delivering power efficiently, whereas for 12 volts, twice the size of wire is needed to provide the same amount of power.

What is the difference between 12V and 24V LED lights?

The main difference in the 12V and 24V LED strip lights is that 12V has more frequent cutpoints suitable for corners. On the other hand, 24V strips can run a longer distance without experiencing voltage drop.

Do LED strip lights need to be plugged in?

When it comes to led strips, most of them will come with a female 2.1mm connection point ensuring that the connection is seamless. All you’ll need to do is plug in the led strips into your plug-in power supply and you’ll have a working led light. The other option is for those using the hardwired power supplies.

Contents

This entry was posted in Power by Claire Hampton. Bookmark the permalink.
Avatar photo

About Claire Hampton

Claire Hampton is a lover of smart devices. She has an innate curiosity and love for anything that makes life easier and more efficient. Claire is always on the lookout for the latest and greatest in technology, and loves trying out new gadgets and apps.