How Do I Know If My Lock Is A 5 Lever Mortice Deadlock?

You can often identify a five lever mortice deadlock by the following:

1. The words ‘5 Lever’ engraved on the internal faceplate of the lock.
2. Mostly found on wooden doors.
3. Locks and unlocks from the inside and outside with a key.
4. The lock sits within the frame of the door.

Is a deadlock the same as a mortice lock?

Mortice locks can be known as a Deadlock or Sashlock. They both have essentially the same operating system, with the distinguishable difference between them being the use of a handle that operates a latch within a sashlock.

What is a Mortice 5 lever deadlock?

5 lever mortice deadlocks are a type of lock that is installed into the door material. The lock can be locked and unlocked using a key, and it has 5 levers to make it more secure. 5 lever mortice dead locks are available in a range of finishes, it can be used on both internal and external doors throughout a building.

How do I know if my door lock conforms to BS3621?

One way to check your front or back door locks are conforming to BS3621 is to look for the British Standard Kitemark (BSI) on the faceplate of the lock. The faceplate of the lock is viewable when you open the door; you should also see the specific standard number e.g. BS3621 stamped on the plate.

What is a 5 Lever Mortice Deadlock BS3621?

BS3621 Fortress 5 Lever Mortice Deadlock
High security 5 Lever Mortice Deadlock resistant to drilling, hacksawing and picking through steel plates and false notching.

Can you pick a 5 lever mortice lock?

A five lever mortice lock keep looks like this:
It will be made of a thick hard plate metal and secured with four deep set screws. Two and three lever mortice locks can be picked relatively easily, because tools can be inserted up into the lock from the key hole from where the burglar can manipulate the levers.

How do you measure a mortice lock?

You can measure the mortice locks by measuring the backset and the centre. It is also advised you measure the case width and height and the forend length and width. Backset – The backset is measured through measuring from the centre of the keyhole to the forend of the mortice lock.

What is a 5 lever sash lock?

These locks normally have a smaller bolt and no anti drill facilities and perhaps no gates to protect the lock from being picked .

How does a five lever lock work?

5 lever locks use 5 levers. These levers are moved into position when the key is entered and turned in the lock. Once shut, you can’t open the lock again from the outside without the key.

Is Ultion British standard?

Approved by British Standards.
Ultion is accredited with the highest 3 star rating.

What does BS3621 mean?

BS3621 is a British Standard for locks fitted to doors, designed so we can easily know that a lock is of a good, theft-resistant standard.This standard is most often specified for final exit doors on a property (front and back doors) as these are the most prone to break-in attempts.

What type of lock is Ultion?

Britain’s most secure composite door has just got even better thanks to Ultion, a revolutionary locking system that when locked, stays locked! When it detects attack, a hidden lock within the Ultion automatically engages, so that even when snapped twice nothing gets past it.

What is a mortise deadlock?

Mortice deadlocks are the simplest. They only have a keyhole and a locking bolt that goes back and forth. A mortice sashlock, on the other hand, features a handle-operated latch mechanism. This means you can open and close the door without having to use the key, but can still lock the door when you leave the building.

What is a MultiPoint locking system?

What are MultiPoint Locks? Multipoint locking systems are found on most uPVC and composite doors. They are the long strip which bolts in to the side of the door. It locks at multiple points along the frame, hence the name multipoint lock.

What are British Standard locks on all windows and doors?

BS3621 is the basic BSI standard which the locks on your ground floor exterior doors need to meet in order to comply with any home insurance policy.

Are Mortice locks easy to pick?

It’s a difficult game, and most pro locksmiths will drill a curtain mortice lock (drilling can be done in such a way the lock can be reused) but as far as picking goes, it’s an incredible skill that will give you an incredible buzz.

Are mortise locks easy to pick?

This includes all doors, not just the front, so that means side doors, back doors and especially patio doors.Any door is only as strong as its lock. One that is weak, easy to pick or remove makes you vulnerable. Here are six things you need to know about mortise locks for residential door security.

What is the case size on a mortice lock?

Standard Case Depth sizes are 64mm (2.5″) and 76mm (3″) and standard Lock backset sizes are 44mm and 57mm, a 50mm case size is also available for doors with a narrow stile or aluminium doors. Other lock measurements although important are not so critical, these include Case Height, Forend Length and Width.

How can you tell a 5 lever lock?

How to tell a 5 Lever Mortice Deadlock conforms to BS3621

1. Kitemark Engraved – The Mortice Lock will have the British Standard Kitemark engraved on faceplate.
2. Number of Levers Engraved – Faceplate should state the number of levers the lock has.

What does lever mean in locks?

Definitions of lever lock. a lock whose tumblers are levers that must be raised to a given position so that the bolt can move. type of: lock. a fastener fitted to a door or drawer to keep it firmly closed.

What does a 2 lever lock mean?

A 2 lever lock offers key differs between 18 and 20. This means that lock manufacturers make 20 different keys before they can start the process to duplicate the same 20 keys.A 2 lever lock will be most suitable for your internal doors such as bathroom and bedroom doors, where high security is not a priority.