How Do I Increase My Lorex Siren Volume?

Press the Menu button on the remote. 2. Navigate to Setting>Alarm Volume 3. Press the back ( ) button repeatedly on the remote to turn the volume all the way down.

Does Lorex have a siren?

Lorex Active Deterrence cameras feature bright, customizable warning lights and a remote-triggered siren.You can also trigger the lights and sirens manually using the recorder or Lorex Home connectivity software (see 13.2 Manually Activate Deterrence Features ).

How do I turn on the siren on my Lorex camera?

Manual

1. Launch the Lorex Home app, then tap Device Thumbnail to open Live View.
2. Tap camera siren button to manually activate the camera siren.
3. When propmpted, tap OK to turn it ON.
4. NOTE: The siren will blow off for 10 seconds.
5. Tap the siren for the second time to turn it OFF.

What does the Red C mean on Lorex camera?

A: Hello, The DVR can be set up for continuous recording, and an indicator symbol will be displayed next to a “C” on each of the channels to indicate that they are recording. Thanks, Lorex.

Do Lorex cameras have sound?

The system supports Lorex HD audio cameras, which transmit audio through the same coax cable used for video connection. The system can also record one audio channel using the AUDIO IN port on the rear panel.

Does Lorex have 2 way audio?

COLOR NIGHT VISION – Keep your family and possessions safe.2-WAY TALK – Keep your family and possessions safe with the ability to listen or talk directly to anyone on your property with the built-in mic and speaker.

What is Lorex smart motion?

The system supports detection of people and vehicles with compatible IP cameras only. You can also link white light deterrence to person and/or vehicle detection on compatible Lorex deterrence cameras for an added level of smart security.

How do I adjust my Lorex camera?

To adjust image settings:

1. Right-click on the channel you would like to configure and select Camera Setting. Enter the system password if prompted.
2. Configure the following settings as needed: Note. The settings listed below are only shown if they are supported on the selected camera.
3. Click OK to save changes. Note.

How do I turn on the motion light on my Lorex camera?

Motion

1. Launch the Lorex Home app, then tap Device Settings.
2. Tap Detection Settings.
3. Toggle Motion Detection button to ON.
4. Tap Smart Detection.
5. Toggle Outdoor Detection button to ON if you want to link deterrence light to vehicle detection.

How do I turn off Spotlight on my Lorex camera?

Wi-Fi Security Camera – How to turn off camera LED light

1. Launch the Lorex Home app, then tap Device Settings.
2. Scroll down and locate the Camera LED.
3. To turn on, toggle the LED button to ON.
4. To turn off, toggle the LED button to OFF.

What does the M mean on Lorex?

motion
The M means motion.it will have a green mark where motion took place so u can just fast forward to them instead of watching the entire yard motionless.

What is threshold on Lorex cameras?

Threshold determines how much motion is required to trigger an event. If the amount of motion exceeds the threshold, an event occurs. It is recommended to select a Threshold between 10~50.

How do you pause Lorex security cameras?

To pause and resume Sequence mode using the mouse:

1. Right-click on the Live View to access the Quick Menu.
2. Click the Start / Stop SEQ icon ( ) to start / stop the Sequence mode.

How do I set up audio on my Lorex camera?

To enable audio recording on your NVR:

1. Right-click on the Live View to access the Quick Menu.
2. Click Main Menu and then click the Camera icon ( ).
3. Click Recording > Recording.
4. Click the Channel drop-down menu to select the channel where the audio-capable camera is connected.

How do I hear audio on my Lorex camera app?

On the Home screen, tap your camera to stream live video. ) to open the Settings menu. Tap to enable / disable your camera’s microphone. IMPORTANT: You must enable your camera’s microphone to set up sound detection and recording.

How do I turn the volume up on my Lorex camera?

Press the Menu button on the remote. 2. Navigate to Setting>Alarm Volume 3. Press the back ( ) button repeatedly on the remote to turn the volume all the way down.

How do you use Lorex intercom?

Here’s how to use the two-way talk feature.

1. Launch the Lorex Home app, then tap Device Thumbnail to open the Live View.
2. Tap the microphone button, then start talking.
3. NOTE: You will get an on-screen prompt when the microphone is ON.
4. Tap the microphone button again to disable two-way talk.

How far can a security camera hear?

The average audio range for most good quality security cameras is 6 meters. Security cameras are usually installed from higher places, so there’s often enough distance from the recorder to the subject.

How do security cameras get sound?

Instructions:

1. Plug Red Power from Microphone into Male Power on Cable.
2. Plug White Audio Plug from Mic into Male Audio on Cable.
3. Plug Female Power on DVR side of cable into Power Adapter.
4. Plug Power Adapter into Power Source.
5. Plug Male Audio on cable into Audio Input (Or Audio In) on DVR.

What is AI rule Lorex?

AI Rule: Check to display captured faces on the right side of the live display. Face detection must be enabled on the correlating channel. Original Scale: Set the system to show the true aspect ratio of the cameras on the live display.

How do you stop bugs from triggering motion cameras?

Keep Your Security Cameras Bug-Free

1. Apply lubricants to the outside case of your camera.
2. Attach a dryer sheet to the camera.
3. Disable the LED lights.
4. Loop a flea collar around your camera.
5. Spray bug repellent around cameras.
6. Sweep camera areas weekly.
7. Use a fan to prevent spider webs.