How Do I Get My Ezviz Wifi Password?

1) Click the “Forgot Password” in login page at EZVIZ mobile app. 2) Enter the user mobile phone number or email address/username, depending on the method the account was registered. 3) A 4-digit verification code will be sent to the user to input and complete his/her password change or recovery.

How do I connect my EZVIZ to Wi-Fi?

Ensure that your EZVIZ device is in ready mode or Wi-Fi configuration mode > then use the EZVIZ mobile app for device Wi-Fi configuration. Within the EZVIZ mobile app, from the home page, tap on the name/serial number of the device > then tap on “Wi-Fi” and follow the prompts and complete the setup.

How do I reset my EZVIZ Wi-Fi password?

Please go to the EZVIZ app > from the login page, tap on “forgot” > Verify Account (Next) > Input the verification code > Reset your password.

Why wont my EZVIZ connect to Wi-Fi?

Ensure the router can distribute IP address to your device or disable the static IP setting (DHCP is enabled by default on all EZVIZ devices). 4) Reset your camera; ensure that your device is in ready mode or Wi-Fi configuration mode > then use the EZVIZ mobile app for device Wi-Fi configuration.

What is Ezviz WiFi password?

Step1: Log in the camera, the User Name is ‘admin’, the Password is ‘12345‘ by default. Step2:Then go to the Configuration> Advanced Configuration> Security> Security Service>Enable Telnet, then click Save.

What is device verification code Ezviz?

1) Every EZVIZ device comes with a factory programmed verification code or Users have to set their own passwords. For privacy protection, unauthorized users cannot access videos, playback and images without a verification code. 2) EZVIZ adopts HTTPS in order to protect users’ connection to our website.

How do I find my EZVIZ QR Code?

When a device is added to the app, the option to save the QR code of the device is offered. If the user has opted to save the QR code, it can be found in the image gallery of their mobile phone.

How do I change my EZVIZ username?

Login into your account using the EZVIZ mobile app, go to device settings page, tap on the device image tab to edit device name.

How do I reset my EZVIZ?

How to reset the EZVIZ security camera? Hold the reset button for 5-10 secs; wait for the prompt informing you that the device has been reset successfully. Some cameras will not give you the prompt; however wait for 1-2 mins for the indicator lights to flash blue. Generally, reset takes about 1-2 mins.

Why does my EZVIZ say offline?

1) Check the indicator lights on the device; ensure that the device is in configuration mode. 2) Ensure that your router is functional and can go online to the internet and ensure that you do not have multiple devices on your network.

How do I find my EZVIZ IP address?

Open your web browser of choice and type IP address of your EZVIZ router in the address bar. You can find the ip address on the back of your router.

Why is my EZVIZ not working?

1) Ensure the phone signal is good. 2) Ensure that this feature has been enabled in the EZVIZ app.4) Ensure the EZVIZ app is not blocked from sending notifications by any anti-virus installed on your mobile phone. 5) Ensure notification for EZVIZ app has been enabled in phone setting.

How do I reconnect my camera to a new WiFi?

To reconnect a camera using Ethernet:

1. Remove power from your camera.
2. Attach one end of an Ethernet cable to the camera and the other end to your router.
3. Power on your camera.
4. Wait for the camera’s status LED to turn solid green.
5. Configure your camera’s Wi-Fi settings.

What is Ezviz NVR default password?

The default password is ezviz_ABCDEF. Please note that ABCDEF is your device’s identification code located on the back of your device.

How do I transfer my Ezviz camera to another phone?

How to Share EZVIZ Devices with Friends and Family?

1. Log into the EZVIZ mobile app.
2. Select the camera you wish to share > then from the top right corner, tap on the share icon.
3. Follow the prompt > input the customer’s valid email/phone number registered with EZVIZ.
4. Click on “OK” to complete the settings.

How do I add a device to Ezviz app?

How to add a new device in the EZVIZ App

1. Log in your EZVIZ App.
2. Tap the “+” in the top right of the Home page to add a new device.
3. It is recommended to scan the QR Code on the cover of this manual or on the body of the camera to add the device.

Why is my EZVIZ flashing blue?

The LED turning fast-flashing blue indicates that the camera is powered on and ready for network configuration. Wireless Connection: Connect the camera to Wi-Fi.

How do I register my Ezviz?

How to create an EZVIZ Account?

1. Download the EZVIZ App from the Google Play Store or the Apple App Store.
2. Once downloaded, open the app and tap “Sign up” on the app screen to create an account.
3. Select the region you want to register and tap “Next”
4. Choose telephone number or E-mail to continue.

How do I delete my Ezviz account?

How to delete my EZVIZ account permanently?

1. Tap on the More tab.
2. Tap on the “Account Security”
3. Tap the “Delete Account”
4. Please make sure that all the devices under this account have been removed before you delete your account.

Why does my WiFi camera keep disconnecting?

If the camera keeps disconnecting, maybe the WiFi signal is not so good.2: Check the camera and the WiFi Hotspot distance is not far and whether it is blocked by several walls. 3: If there are many 2.4G wifi device, please change the Router’s WiFi channel.

How do I fix my offline camera?

If the camera is still offline, there may be a problem with your home network. You can reset your home router and/or modem. A) Power off the camera (unplug the camera, or hold the button down for 5 seconds until the lights turn off; press it to turn it back on after about 1 minute.)